dmitriy.kazimirov/inxi
1
0
Fork 0
mirror of https://github.com/smxi/inxi.git synced 2024-11-16 08:11:39 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
inxi/inxi.1

2721 lines
96 KiB
Groff
Raw Normal View History

Many small updates, enhancements, bug fixes!!! We've been saving them up!! Here they are!! Don't wait!! Thanks mr. mazda for many issue finds, and suggestions. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. Due to unfixable rpm slowdowns, removed package counts for default output for rpm based systems. We were seeing delays of up to 30+ seconds just to list the rpm package count, which is absurd, even after the rpm optimizations inxi already runs. To allow rpm users to get excluded by default for rpm package list counts, added --pkg flag plus a short message telling them to use that flag to get the installed package count if they want it. Changes like this are very unfortunate, but in 2021 for a package manager at times to require over 30 seconds to generate a trivial installed package list is just not acceptable. One of the reasons this release was delayed was this was not an easy decision to make, it's very rare support for a feature is removed for specific tools due to how badly the tools may perform. Note that whatever higher level tool is used, like dnf, zypp, it's still the same speed, they all appear to use the same core engine. Basically this decision was forced since either inxi looks really bad and slow, when it's not, or the actual cause was removed from default outputs. -------------------------------------------------------------------------------- BUGS: 1. Small bug in nfs blacklist for disk used led to nfs used being added, which leads to silly used percents. This is corrected. 2. If ram vendor ID failed, inxi would delete the part number. Oops. This was related to the Mushkin failures. 3. Close to a bug, though not one internally, but to users would appear as one: ZFS does not act as expected, zpool list did not in fact return the pool size, which I had always assumed to be the case, but in a very strange decision, does return something very close to the pool size for mirrors, but NOT for z1 or z2 pools, then it returns the total size of the drives that make up the pool. To call this strange behavior would be an understatement. The fix was to modify the logic to use zfs list instead to get the size data. This also makes the drive total report far more accurate, since it lists usable space now for ZFS as was always intended. The cause of this was simply that I'd always had access to zfs mirrors, not z1 or z2 arrays. -------------------------------------------------------------------------------- FIXES: 1. OpenSuse and maybe others use kdm3 for Trinity, not kdm, so dm was failing. 2. Going along with fix 1, made kde version detection more robust so may catch more fringe / corner cases for kde desktops. These were mainly added to correct Trinity desktop version detections. 3. Mushkin ram vendor ID was failing, that is or should be corrected. 4. Added in /dev/disk/by-id handlers for zpool components, there are several variants, wwn-, pci-, scsi-, ata-, but they all map to the real /dev drive IDs. Failure to unmap these led to failing to match components and get size info etc for zfs. 5. See DOCUMENTATION: 2, language changes for weather feature abuse. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going along with the rpm issues, added dnf.conf support to yum/dnf repo types. Not sure how that one was missed, but there it is. This should tighten repo reports for dnf/yum/zypp types. 2. Added LeftWM. LeftWM confirmed working. Added unverifed detections for: penrose, 2bwm, 5dwm, catwm, mcwm, monsterwm, snapwm, uwm, wingo, wmfs, wmfs2. 3. Added xfwm as a compositor type, that had bee left out, somewhat on purpose, since xfwm can run in compositing or non compositing mode. But should show since many users use compositing mode now. 4. Added OpenMediaVault distro ID and systembase handlers. 5. Going along with zfs bug fix 3, using zfs list data for free, size, allocated. Trying to understand how zfs developers actually thought about this is nearly impossible so just used what seems to correspond to reality most. Also shows raw values for zfs data in RAID along with regular ones to make clear which is which value. 6. Added more CPU architecture ID matches for AMD Zen and a variety of Intel. Both vendors finally released some new CPUs and the data became available, which doesn't always happen quickly. 7. A bunch of new disk vendors and vendor IDs added. Never stops, like the sands of time, like the ocean waves, like the scuttling crabs scrounding around in the seaweed in the foam where the outgoing wave left its mark... -------------------------------------------------------------------------------- DOCUMENTATION: 1. Added leftwm keybindinigs to inxi-data.txt desktop/wm section. Updated more wm in that section as well, and list more info on wms for future reference etc. Also reorganized and more more readable wm section. 2. Help/Man now make more clear that automated requests or excessive use of the inxi weather feature are not under any circumstance permitted. There had been some ambiguity and lack of clarity about what abuse is, now it should be more clear. -------------------------------------------------------------------------------- CODE CHANGES: 1. Refactored uptime parser logic, the code and regex was just getting too messy and difficult to work with and debug, now it works similar to how the revised BSD parsers run, the regex are pulled apart and made more granular so a small syntax change ideally won't break the detections as easily. 2. Cleaned up sub cpu_arch() and made all the arch values line up nicely, over time I notice that almost invariably stuff done to save lines of code makes code harder to read as the feature expands, so it's generally worth just unravelling it so it all stacks and is easy to scan/read. Also removed extra white space in parens, which is something I'm leaning more towards but it's not worth fixing all at once so it's just done where it's noticed. That's using: if ( /test/ ){ rather than: if (/test){ I believe using more white space helped with Perl comprehension in the intermediate stages, but is not required anymore and just looks like extra whitespace now.
2021-07-12 02:32:13 +00:00
.\" inxi.1 - manpage for inxi system information tool
.\" Copyright (C) 2021 Harald Hope
.\"
.\" This program is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation; either version 3 of the License, or
.\" (at your option) any later version.
.\"
.\" This program is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License along
.\" with this program; if not, write to the Free Software Foundation, Inc.,
.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
.\"
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
.TH INXI 1 "2022\-02\-22" "inxi" "inxi manual"
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH NAME
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
inxi \- Command line system information script for console and IRC
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH SYNOPSIS
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
\fBinxi\fR
second try, to get man output and roffit output to match better
2016-10-29 22:25:55 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBinxi\fR [\fB\-AbBCdDEfFGhiIjJlLmMnNopPrRsSuUVwyYzZ\fR]
second try, to get man output and roffit output to match better
2016-10-29 22:25:55 +00:00
man page fix
2020-11-11 23:45:10 +00:00
\fBinxi\fR [\fB\-c NUMBER\fR]
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
[\fB\-\-sensors\-exclude SENSORS\fR] [\fB\-\-sensors\-use SENSORS\fR]
man page fix
2020-11-11 23:45:10 +00:00
[\fB\-t\fR [\fBc\fR|\fBm\fR|\fBcm\fR|\fBmc\fR][\fBNUMBER\fR]]
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
[\fB\-v NUMBER\fR] [\fB\-W LOCATION\fR]
fixed weather unit man
2018-05-21 22:11:04 +00:00
[\fB\-\-weather\-unit\fR {\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR}] [\fB\-y WIDTH\fR]
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
\fBinxi\fR [\fB\-\-memory\-modules\fR] [\fB\-\-memory\-short\fR]
redid patches, I think
2021-08-25 03:39:33 +00:00
[\fB\-\-recommends\fR] [\fB\-\-sensors\-default\fR] [\fB\-\-slots\fR]
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
\fBinxi\fB [\fB\-x\fR|\fB\-xx\fR|\fB\-xxx\fR|\fB\-a\fR] \fB\-OPTION(s)\fR
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
All short form options have long form variants \- see below for these and more
advanced options.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH DESCRIPTION
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBinxi\fR is a command line system information script built for console and
IRC. It is also used a debugging tool for forum technical support to quickly
ascertain users' system configurations and hardware. inxi shows system
hardware, CPU, drivers, Xorg, Desktop, Kernel, gcc version(s), Processes, RAM
usage, and a wide variety of other useful information.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBinxi\fR output varies depending on whether it is being used on CLI or IRC,
with some default filters and color options applied only for IRC use.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Script colors can be turned off if desired with \fB\-c 0\fR, or changed
using the \fB\-c\fR color options listed in the STANDARD OPTIONS section below.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH PRIVACY AND SECURITY
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
In order to maintain basic privacy and security, inxi used on IRC automatically
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
filters out your network device MAC address, WAN and LAN IP, your \fB/home\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
username directory in partitions, and a few other items.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Because inxi is often used on forums for support, you can also trigger this
filtering with the \fB\-z\fR option (\fB\-Fz\fR, for example). To override
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
the IRC filter, you can use the \fB\-Z\fR option. This can be useful in
debugging network connection issues online in a private chat, for example.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH USING OPTIONS
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Options can be combined if they do not conflict. You can either group the
letters together or separate them.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Letters with numbers can have no gap or a gap at your discretion, except when
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
using \fB \-t\fR. Note that if you use an option that requires an additional
argument, that must be last in the short form group of options. Otherwise
you can use those separately as well.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
For example:
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
\fBinxi \-AG\fR | \fBinxi \-A \-G\fR | \fBinxi \-b\fR | \fBinxi \-c10\fR
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
| \fBinxi \-FxxzJy90\fR | \fBinxi \-bay\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Note that all the short form options have long form equivalents, which are
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
listed below. However, usually the short form is used in examples in order to
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
keep things simple.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
Small point release with some useful fixes, some bugs corrected, small enhancement. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Note on KNOWN ISSUES 2 from 3.3.10, I realized that the second level indentation actually takes care of that hanging parent, since now it's quite clear that its children are indented on the following line. So that issue took care of itself. -------------------------------------------------------------------------------- BUGS: 1. In $bsd_type cases, specifically SunOS triggered this, where sysctl was not present (which it always is in all other BSD types), it tripped an error due to failure to update to revised $alerts{'sysctl'}->{'message'}, instead was using the old method. Failed to update that in refactor of CheckTools logic. Would impact no supported operating systems, but is a bug. 2. Corner case, a combination I never used, inxi -a, triggers error in the RAID logic because the mdadm test was not run, generating an undefined eq error. Only happened when mdraid was present and used on system. 3. Tiny bug, for st+mt cpus, like alder lake, was printing out second tpc by accident which made it look like it said st: 4 tpc: 2. Just a small output glitch. -------------------------------------------------------------------------------- FIXES: 1. Added some fallback 32 bit system tests, [2345]86, like i386, i686. 2. Changed shell: Unknown Shell to shell: N/A, that was a legacy use, and was obviously redundant. N/A is more consistent with rest of output no value found handling. Due to requirement of doing empty tests, this is set in the data, not output, generator component. 3. Refactored partition data logic to get rid of bsd tests for df -kTP, -kT, -k. Now tests only to see if returns data, cascades down until it gets something. Now will attempt to reconnect hanging lines when no -P feature available prior to main partition data processing. This makes it agnostic to os issues, and it just pays attention to feature support. Also adds in dynamic column count instead of hard-coded, this avoids oddities and future proofs to some degree. Now systems will adapt seamlessly if support for -P appears, or -T, or whatever. 4. Partitions corner case, where has zram, but has no partitions, failed to show partitions no data found message since @partitions had data in it, but nothing for partitions output to print. Seen in TinyCore for example, but might happen in other ram based systems. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Added Slint to distro ID, and slint/slackware to system base. -------------------------------------------------------------------------------- CHANGES: 1. None -------------------------------------------------------------------------------- DOCUMENTATION: 1. Typo in man page fixed. 2. A few more edits and corrections on 3.3.10 changelong. That thing was written concurrently with the development, and thus had lingering errors when things were changed in midstream. -------------------------------------------------------------------------------- CODE: 1. Added --cygwin and --android fake system type flag. Switches on $b_android/ $b_cygwin flags.
2022-01-18 22:08:04 +00:00
These are available options sections:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
* \fBSTANDARD OPTIONS\fR Primary data types trigger items.
* \fBFILTER OPTIONS\fR Apply a variety of output filters.
* \fBOUTPUT CONTROL OPTIONS\fR Change default colors, widths, heights, output
types, etc.
* \fBEXTRA DATA OPTIONS\fR What \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR, and \fB\-a\fR
add to the output.
* \fBADVANCED OPTIONS\fR Modify behavior or choice of data sources, and other
advanced switches.
* \fBDEBUGGING OPTIONS\fR For development use mainly, or contributing datasets to
the project.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH STANDARD OPTIONS
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-A \fR, \fB\-\-audio\fR
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Show Audio/sound device(s) information, including device driver. Show running
sound server(s). See \fB\-xxA\fR to show all sound servers detected.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-b \fR, \fB\-\-basic\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show basic output, short form. Same as: \fBinxi \-v 2\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-B \fR, \fB\-\-battery\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show system battery (\fBID\-x\fR) data, charge, condition, plus extra
information (if battery present). Uses \fB/sys\fR or, for BSDs without systctl
battery data, use \fB\-\-dmidecode\fR to force its use. \fBdmidecode\fR does
not have very much information, and none about current battery
state/charge/voltage. Supports multiple batteries when using \fB/sys\fR or
\fBsysctl\fR data.
Note that for \fBcharge:\fR, the output shows the current charge, as well as
its value as a percentage of the available capacity, which can be less than
the original design capacity. In the following example, the actual current
available capacity of the battery is \fB22.2 Wh\fR.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBcharge: 20.1 Wh (95.4%)\fR
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The \fBcondition:\fR item shows the remaining available capacity / original
design capacity, and then this figure as a percentage of original capacity
available in the battery.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\fBcondition: 22.2/36.4 Wh (61%)\fR
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
With \fB\-x\fR, or if voltage difference is critical, \fBvolts:\fR item shows
the current voltage, and the \fBmin:\fR voltage. Note that if the current is
below the minimum listed the battery is essentially dead and will not charge.
Test that to confirm, but that's technically how it's supposed to work.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBvolts: 12.0 min: 11.4\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
With \fB\-x\fR shows attached \fBDevice\-x\fR information (mouse, keyboard,
etc.) if they are battery powered.
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-bluetooth\fR
.br
See \fB\-E\fR.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-c \fR, \fB\-\-color\fR
.br
See \fBOUTPUT CONTROL OPTIONS\fR.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-C \fR, \fB\-\-cpu\fR
Show full CPU output (if each item available): basic CPU topology, model, type,
L2 cache, average speed of all cores (if > 1 core, otherwise speed of the core),
min/max speeds for CPU, and per CPU clock speed. More data available with
\fB\-x\fR, \fB\-xxx\fR, and \fB\-a\fR options.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Explanation of CPU type (\fBtype: MT MCP\fR) abbreviations:
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
* \fBAMCP\fR \- Asymmetric Multi Core Processor. More than 1 core per CPU, and
more than one core type (single and multithreaded cores in the same CPU).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
* \fBAMP\fR \- Asymmetric Multi Processing (more than 1 physical CPU, but not
identical in terms of core counts or min/max speeds).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
* \fBMT\fR \- Multi/Hyper Threaded CPU (more than 1 thread per core, previously
\fBHT\fR).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
* \fBMST\fR \- Multi and Single Threaded CPU (a CPU with both Single and Multi
Threaded cores).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBMCM\fR \- Multi Chip Model (more than 1 die per CPU).
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBMCP\fR \- Multi Core Processor (more than 1 core per CPU).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
* \fBSMP\fR \- Symmetric Multi Processing (more than 1 physical CPU).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBUP\fR \- Uni (single core) Processor.
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note that \fBmin/max:\fR speeds are not necessarily true in cases of
overclocked CPUs or CPUs in turbo/boost mode. See \fB\-Ca\fR for alternate
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBbase/boost:\fR speed data, more granular cache data, and more.
Sample:
.nf
\fBCPU:
Info: 2x 8\-core model: Intel Xeon E5\-2620 v4 bits: 64 type: MT MCP SMP
cache: L2: 2x 2 MiB (4 MiB)
Speed (MHz): avg: 1601 min/max: 1200/3000 cores: 1: 1280 2: 1595 3: 1416
... 32: 1634\fR
.fi
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-d \fR, \fB\-\-disk\-full\fR,\fB\-\-optical\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show optical drive data as well as \fB\-D\fR hard drive data. With \fB\-x\fR,
adds a feature line to the output. Also shows floppy disks if present. Note
that there is no current way to get any information about the floppy device
that we are aware of, so it will simply show the floppy ID without any extra
data. \fB\-xx\fR adds a few more features.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-D \fR, \fB\-\-disk\fR
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
Show Hard Disk info. Shows total disk space and used percentage. The disk used
percentage includes space used by swap partition(s), since those are not usable
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
for data storage. Also, unmounted partitions are not counted in disk use
percentages since inxi has no access to the used amount.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
If the system has RAID or other logical storage, and if inxi can determine
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
the size of those vs their components, you will see the storage total raw and
usable sizes, plus the percent used of the usable size. The no argument short
form of inxi will show only the usable (or total if no usable) and used
percent. If there is no logical storage detected, only \fBtotal:\fR and
\fBused:\fR will show. Sample (with RAID logical size calculated):
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBLocal Storage: total: raw: 5.49 TiB usable: 2.80 TiB used: 1.35 TiB
(48.3%)\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Without logical storage detected:
\fBLocal Storage: total: 2.89 TiB used: 1.51 TiB (52.3%)\fR
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Also shows per disk information: Disk ID, type (if present), vendor (if
detected), model, and size. See \fBExtra Data Options\fR (\fB\-x\fR options)
and \fBAdmin Extra Data Options\fR (\fB\-\-admin\fR options) for many more
features.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-E\fR, \fB\-\-bluetooth\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show bluetooth device(s), drivers. Show \fBReport:\fR with HCI ID, state,
address per device (requires \fBbt\-adapter\fR or \fBhciconfig\fR),
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
and if available (hciconfig only) bluetooth version (\fBbt\-v\fR).
See \fBExtra Data Options\fR for more.
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
If bluetooth shows as \fBstatus: down\fR, shows \fBbt\-service:\fR\fB state
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
and rfkill\fR software and hardware blocked states, and rfkill ID.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note that \fBReport\-ID:\fR indicates that the HCI item was not able to be
linked to a specific device, similar to \fBIF\-ID:\fR in \fB\-n\fR.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
If your internal bluetooth device does not show, it's possible that
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
it has been disabled, if you try enabling it using for example:
\fBhciconfig hci0 up\fR
Bug fixes!! Fixes!!! Refactors!!! Edits!!! Bugs: 1. Big bug, 3.2 appears to have introduced this bug, for disks, rotation and partition scheme would never show, oops. 2. Tiny bug kept one specific smart value from ever showing, typo. Fixes: 1. Accidentally followed Arch linux derived distro page, which claims KaOS as arch derived, when of course it's not, it's its own distro, own toolchain, etc. I kind of knew this but had forgotten, then I believed the Arch derived distro page, oh well. Resulted in KaOS being listed with arch linux as system base with -Sx. Arch should fix this, it's not like it's hard, just remove the distro from the page. 2. Cleared up explanations for drivetemp vs hddtemp use, updated --recommends, man, and help to hopefully make this clear. Debian will be dropping hddtemp, which is not maintained, sometime in the coming years, sooner than later. Note that users unfortunately have to manually enable drivetemp module unless their distros enable it by default, but the man/recommands/help explain that. 3. Fixed smart indentation issues, that went along with code change 1, was failing to indent one further level for failed/age values like it's supposed to. Enhancements: 1. Added /proc/device to debugger, that will help track block device main numbers 2. More disk vendors, more disk vendor IDs!!! As noted, the enternal flow flows eternally, thanks linux-lite hardware database users!! and other inxi users, whose outputs sometimes reveal a failure or two. 3. Added loaded kernel module tests to --recommends, this was mostly to let users know that drivetemp is needed if you want non superuser fast drive temps, and that this came along with kernels 5.6 or newer. Hopefully word will start drifting out. Note that if inxi is using drivetemp values, drive temps will appear as regular user with -Dx, and will be to 1 decimal place. hddtemp temps are integers, and requires sudo to display the temps. 4. To handle issue #239 which I'd thought of trying off and on, but never did, added option to -Dxxx to show SSD if a positive SSD ID was made to rotation: So rotation will show either nothing, if no rotation or ssd data is detected, the disk speed in rpm, or SSD if an SSD device. There may be corner cases where this is wrong, but I don't have data for that, for example, if a disk is parked and has zero rotation but is a HDD, not as SSD. I don't know what the data looksl ike in that case. Note that if sudo inxi -Da is used, and smartctl is installed, it should be right almost all the time, and with regular -Dxxx, it's going to be right almost always, with a few corner cases. That slight uncertainty is why I never implemented this before. Legacy drives also sometimes did not report rotation speeds even when HDD, so those may create issues, but inxi will only call it an SSD if it's an nvme, mmcblk device, both are easy to ID as SSD, or if it meets certain conditions. It will not call a drive an SSD if it was unable to meet those conditions. INTERNAL CODE CHANGES: 1. Refactored the output logic for DiskData, that was messy, split it into a few subs, and also refactored the way smartctl data was loaded and used, that's much cleaner and easier to use now. Split the previous 1 big sub into: totals_output(), drives_output(), and smart_output(). Also split out the smart field arrays into a separate sub, which loads references to avoid creating new arrays and copying them all over when outputting smart data. References are weird to work with directly but they are MUCH faster to use, so I'm moving as much of the internal logic to use array raferences instead of dereferenced arrays/hashes assigned to a new array, or hash. 2. Redid all the output modules and renamed them to be more consistent and predictable, and redid the logic here and there to make the get() items be fairly similar on all the data builder packages. Now as with the data subs, which generally end in _data, now most of the output subs end with _output. 3. Roughly finished the process started in 3.2, got rid of redundant array loads, changed: @something = something_data(); push (@rows,@something); to: push (@rows,something_data()); which avoids creating an extra array, this also let me remove many arrays overall. 4. Missed a few hashes in machine data that were being passed directly, not as references, to other subs, corrected that. I think I missed those because they were %, so the search I did for @ in sub arg lists didn't catch the % hashes.
2021-02-09 01:07:34 +00:00
and it returns a blocked by RF\-Kill error, you can do one of these:
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
small man fix
2021-02-09 01:15:46 +00:00
\fBconnmanctl enable bluetooth\fR
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
or
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBrfkill list bluetooth\fR
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\fBrfkill unblock bluetooth\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-filter\fR, \fB\-z\fR
.br
See \fBFILTER OPTIONS\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-f \fR, \fB\-\-flags\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show all CPU flags used, not just the short list. Not shown with \fB\-F\fR
in order to avoid spamming. ARM CPUs: show \fBfeatures\fR items.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-F \fR, \fB\-\-full\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show Full output for inxi. Includes all Upper Case line letters (except
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fB\-J\fR and \fB\-W\fR) plus \fB\-\-swap\fR, \fB\-s\fR and \fB\-n\fR. Does not
show extra verbose options such as \fB\-d \-f \-i -J \-l \-m \-o \-p \-r \-t \-u
\-x\fR unless you use those arguments in the command, e.g.:
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBinxi \-Frmxx\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-G \fR, \fB\-\-graphics\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show Graphic device(s) information, including details of device and display
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
drivers (\fBX:\fR \fBloaded:\fR, and, if applicable: \fBunloaded:\fR,
\fBfailed:\fR, and active \fBgpu:\fR drivers), display protocol (if available),
display server (and/or Wayland compositor), vendor and version number, e.g.:
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fBDisplay: x11 server: Xorg v: 1.15.1\fR
or
\fBDisplay: wayland server: X.org v: 1.20.1 with: Xwayland v: 20.1\fR
Slight update to man page as well to reflect recent gfx output changes.
2017-06-25 01:28:24 +00:00
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
If protocol is not detected, shows:
\fBDisplay: server: Xorg 1.15.1\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Also shows screen resolution(s) (per monitor/X screen). For X.org: OpenGL
renderer, OpenGL core profile version/OpenGL version; for VESA: data (for
Xvesa); for Wayland: GBM/EGL data (not implemented).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Compositor information will show if detected using \fB\-xx\fR option or always
if detected and Wayland since the compositor is the server with Wayland.
\fB\-Gxx\fR shows monitor data as well, if detected.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-h \fR, \fB\-\-help\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
The help menu. Features dynamic sizing to fit into terminal window. Set script
global \fBCOLS_MAX_CONSOLE\fR if you want a different default value, or use
\fB\-y <width>\fR to temporarily override the defaults or actual window width.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-i \fR, \fB\-\-ip\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Show WAN IP address and local interfaces (latter requires \fBifconfig\fR or
\fBip\fR network tool), as well as network output from \fB\-n\fR. Not shown with
\fB\-F\fR for user security reasons. You shouldn't paste your local/WAN IP.
Shows both IPv4 and IPv6 link IP addresses.
New version, new tarball, new man page. This corrects several oversights of the 2.3.10 IPv6 update. Now there is an -x option for -i that will show the additioanl IPv6 address data for scope global, temporary, and site. Also a fallback for unhandled scope: unknown. If the tool 'ip' is used, it will filter out the deprecated temp site/global addresses, ifconfig tool does not appear to offer this option. Also changed is that now ipv6 address always shows, it's not an -x option. Probably about time to start rolling out ip v6 data to users now that ip v6 is starting, slowly, to be used more. Another small change, the link address for ipv6 is changed from ip-v6: to ip-v6-link so that it's more clear which IP v6 address it is. The last commit had a significant logic error in it that did not distinguish between the link address, which is what should have only shown, and the remaining possible addresses. I've tried to get a basic bsd support, but it's difficult to know the variants of ifconfig output syntax
2017-05-31 22:33:16 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-I \fR, \fB\-\-info\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show Information: processes, uptime, memory, IRC client (or shell type if run
in shell, not IRC), inxi version. See \fB\-Ix\fR, \fB\-Ixx\fR, and \fB\-Ia\fR
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
for extra information (init type/version, runlevel, packages).
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
Note: if \fB\-m\fR is used or triggered, the memory item will show in the main
Memory: report of \fB\-m\fR, not in \fB\Info:\fR.
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Raspberry Pi only: uses \fBvcgencmd get_mem gpu\fR to get gpu RAM amount, if
user is in video group and \fBvcgencmd\fR is installed. Uses this result to
increase the \fBMemory:\fR amount and \fBused:\fR amounts.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-j\fR, \fB\-\-swap\fR
Shows all active swap types (partition, file, zram). When this option is used,
swap partition(s) will not show on the \fB\-P\fR line to avoid redundancy.
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
To show partition labels or UUIDs (when available and relevant), use with
\fB\-l\fR or\fB \-u\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-J \fR, \fB\-\-usb\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Show USB data for attached Hubs and Devices. Hubs also show number of ports. Be
aware that a port is not always external, some may be internal, and either used
or unused (for example, a motherboard USB header connector that is not used).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Hubs and Devices are listed in order of BusID.
man page fixes, lintian stuff.
2020-04-23 03:04:46 +00:00
BusID is generally in this format: BusID\-port[.port][.port]:DeviceID
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Device ID is a number created by the kernel, and has no necessary ordering or
sequence connection, but can be used to match this output to lsusb values, which
generally shows BusID / DeviceID (except for tree view, which shows ports).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
man page fixes, lintian stuff.
2020-04-23 03:04:46 +00:00
Examples: \fBDevice\-3: 4\-3.2.1:2\fR or \fBHub: 4\-0:1\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
The \fBrev: 2.0\fR item refers to the USB revision number, like \fB1.0\fR or
\fB3.1\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-l \fR, \fB\-\-label\fR
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
Show partition labels. Use with \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, and \fB\-P\fR
to show partition labels. Does nothing without one of those options.
Sample: \fB\-ojpl\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-L\fR, \fB\-\-logical\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Show Logical volume information, for LVM, LUKS, bcache, etc. Shows size, free
space (for LVM VG). For LVM, shows \fBDevice\-[xx]: VG:\fR (Volume Group)
size/free, \fBLV\-[xx]\fR (Logical Volume). LV shows type, size, and components.
Note that components are made up of either containers (aka, logical devices), or
physical devices. The full report requires doas/sudo/root.
Logical block devices can be thought of as devices that are made up out of
either other logical devices, or physical devices. inxi does its best to show
what each logical device is made out of. RAID devices form a subset of all
possible Logical devices, but have their own section, \fB\-R\fR.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
If \fB\-R\fR is used with \fB\-Lxx\fR, \fB\-Lxx\fR will not show RAID
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
information for LVM RAID devices since it's redundant. If \fB\-R\fR is not used,
a simple RAID line will appear for LVM RAID in \fB\-Lxx\fR.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fB\-Lxx\fR also shows all components and devices. Note that since components
can go in many levels, each level per primary component is indicated by either
another 'c', or ends with a 'p' device, the physical device. The number of c's
or p's indicates the depth, so you can see which component belongs to which.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fB\-L\fR shows only the top level components/devices (like \fB\-R\fR).
\fB\-La\fR shows component/device size, maj:min ID, mapped name (if applicable),
and puts each component/device on its own line.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Sample:
.nf
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fB Device\-10: mybackup type: LUKS dm: dm\-28 size: 6.36 GiB Components:
c\-1: md1 cc\-1: dm\-26 ppp\-1: sdj2 cc\-2: dm\-27 ppp\-1: sdk2\fR
\fBLV\-5: lvm_raid1 type: raid1 dm: dm\-16 size: 4.88 GiB
RAID: stripes: 2 sync: idle copied: 100% mismatches: 0
Components: c\-1: dm\-10 pp\-1: sdd1 c\-2: dm\-11 pp\-1: sdd1 c\-3: dm\-13
pp\-1: sde1 c\-4: dm\-15 pp\-1: sde1\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.fi
It is easier to follow the flow of components and devices using \fB\-y1\fR. In
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
this example, there is one primary component (c\-1), md1, which is made up of
two components (cc\-1,2), dm\-26 and dm\-27. These are respectively made from
physical devices (p\-1) sdj2 and sdk2.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.nf
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
\fBDevice\-10: mybackup
maj\-min: 254:28
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
type: LUKS
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
dm: dm\-28
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
size: 6.36 GiB
Components:
c\-1: md1
maj\-min: 9:1
size: 6.37 GiB
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
cc\-1: dm\-26
maj\-min: 254:26
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
mapped: vg5\-level1a
size: 12.28 GiB
ppp\-1: sdj2
maj\-min: 8:146
size: 12.79 GiB
cc\-2: dm\-27
maj\-min: 254:27
mapped: vg5\-level1b
size: 6.38 GiB
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
ppp\-1: sdk2
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
maj\-min: 8:162
size: 12.79 GiB\fR
.fi
Bug Fixes!!! Continuing internal refactor!! This bug report came in right after 3.2.00 went out live, but I would never have found it myself in testing so better found than not found! Bugs: 1. A bug was introduced to dmidecode data handlers in 3.2.00 resulted in the dmidecode data array basically eating itself up until errors appear. Quite difficult to trigger, but babydr from Slackware forums figured it out, using -F --dmidecode to force dmidecode use for all features that support it triggered thee bug always. This was a result of the refactor, previously inxi had worked on copies of referenced arrays, but in this case, it was working on the original array of arrays, subtle, but obvious. This method was only used on dmidecode arrays. 2. A second bug was exposed almost by accident, for -M --dmidecode data, there was a missing field and also a missing is set test on that field that led to an error of using undefined value in string comparison. This was strictly speaking 2 bugs, both very old, from 2.9 first rewrite, one failing to set/get the value, and the other failing to test if the value was set before using it. Fixes: 1. There were a few glitches in help menu and man page related to -L option, those are corrected. INTERNAL CODE CHANGES: 1. removed bug inducing splice use in some cases, and added parens to splice to make it fit the new way of with perl builtins, when taking 2 or more arguments, use parens. 2. Found many more instances to add -> dereferencing operator. I have to say, not doing that consistently made the code much harder to read, and created situations where it's somewhat ambiguous what item belongs to what, with everything consistently -> operator run, the code is more clear and obvious, and some of the hacks I'd added because of the lack of clarity were also removed. 3. Removed explicit setting of hash references with null value, that was done out of failure to use -> operators which clearly indicate to Perl and coder what is happening, so those crutches were removed. Also got rid of unnecessary array priming like: my @array = (); Some of these habits came from other languages, but in Perl, declaring my @array means it's an array that is null, and you don't need to do a further (). @array = () is obviously fine for resetting arrays in loops or whatever, but not in the initial declaration.
2020-12-17 22:51:11 +00:00
Other types of logical block handling like LUKS, bcache show as:
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Bug Fixes!!! Continuing internal refactor!! This bug report came in right after 3.2.00 went out live, but I would never have found it myself in testing so better found than not found! Bugs: 1. A bug was introduced to dmidecode data handlers in 3.2.00 resulted in the dmidecode data array basically eating itself up until errors appear. Quite difficult to trigger, but babydr from Slackware forums figured it out, using -F --dmidecode to force dmidecode use for all features that support it triggered thee bug always. This was a result of the refactor, previously inxi had worked on copies of referenced arrays, but in this case, it was working on the original array of arrays, subtle, but obvious. This method was only used on dmidecode arrays. 2. A second bug was exposed almost by accident, for -M --dmidecode data, there was a missing field and also a missing is set test on that field that led to an error of using undefined value in string comparison. This was strictly speaking 2 bugs, both very old, from 2.9 first rewrite, one failing to set/get the value, and the other failing to test if the value was set before using it. Fixes: 1. There were a few glitches in help menu and man page related to -L option, those are corrected. INTERNAL CODE CHANGES: 1. removed bug inducing splice use in some cases, and added parens to splice to make it fit the new way of with perl builtins, when taking 2 or more arguments, use parens. 2. Found many more instances to add -> dereferencing operator. I have to say, not doing that consistently made the code much harder to read, and created situations where it's somewhat ambiguous what item belongs to what, with everything consistently -> operator run, the code is more clear and obvious, and some of the hacks I'd added because of the lack of clarity were also removed. 3. Removed explicit setting of hash references with null value, that was done out of failure to use -> operators which clearly indicate to Perl and coder what is happening, so those crutches were removed. Also got rid of unnecessary array priming like: my @array = (); Some of these habits came from other languages, but in Perl, declaring my @array means it's an array that is null, and you don't need to do a further (). @array = () is obviously fine for resetting arrays in loops or whatever, but not in the initial declaration.
2020-12-17 22:51:11 +00:00
\fBDevice\-[xx] [name/id] type: [LUKS|Crypto|bcache]:\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-m \fR, \fB\-\-memory\fR
redid patches, I think
2021-08-25 03:39:33 +00:00
Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
use \fB\-m\fR explicitly. Ordered by system board physical system memory
array(s) (\fBArray\-[number]\fR), and individual memory devices
redid patches, I think
2021-08-25 03:39:33 +00:00
(\fBDevice\-[number]\fR). Physical memory array data shows array capacity,
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
number of devices supported, and Error Correction information. Devices shows
locator data (highly variable in syntax), size, speed, type
(eg: \fBtype: DDR3\fR).
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Note: \fB\-m\fR uses \fBdmidecode\fR, which must be run as root (or start
\fBinxi\fR with \fBdoas/sudo\fR), unless you figure out how to set up doas/sudo
to permit dmidecode to read \fB/dev/mem\fR as user. \fBspeed\fR and
\fBbus\-width\fR will not show if \fBNo Module Installed\fR is found in
\fBsize\fR.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note: If \fB\-m\fR is triggered RAM total/used report will appear in this
section, not in \fB\-I\fR or \fB\-tm\fR items.
Because \fBdmidecode\fR data is extremely unreliable, inxi will try to make
best guesses. If you see \fB(check)\fR after the capacity number, you should
check it with the specifications. \fB(est)\fR is slightly more reliable, but
you should still check the real specifications before buying RAM. Unfortunately
there is nothing \fBinxi\fR can do to get truly reliable data about the system
RAM; maybe one day the kernel devs will put this data into \fB/sys\fR, and make
it real data, taken from the actual system, not dmi data. For most people, the
data will be right, but a significant percentage of users will have either a
wrong max module size, if present, or max capacity.
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Under dmidecode, \fBSpeed:\fR is the expected speed of the memory
(what is advertised on the memory spec sheet) and \fBConfigured Clock Speed:\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
is what the actual speed is now. To handle this, if speed and configured speed
values are different, you will see this instead:
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\fBspeed: spec: [specified speed] MT/S actual: [actual] MT/S\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Also, if DDR, and speed in MHz, will change to: \fBspeed: [speed] MT/S
([speed] MHz)\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
If the detected speed is logically absurd, like 1 MT/s or 69910 MT/s, adds:
\fBnote: check\fR. Sample:
.nf
\fBMemory:
RAM: total: 31.38 GiB used: 20.65 GiB (65.8%)
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
Array\-1: capacity: N/A slots: 4 note: check EC: N/A
Device\-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz)
Device\-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz)
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
actual: 61910 MT/s (30955 MHz) note: check
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
Device\-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz)
Device\-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz)
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
actual: 2 MT/s (1 MHz) note: check\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.fi
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
See \fB\-\-memory\-modules\fR and \fB\-\-memory\-short\fR if you want a
shorter report.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
.TP
.B \-\-memory\-modules\fR
Memory (RAM) data. Show only RAM arrays and modules in Memory report.
Skip empty slots. See \fB\-m\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
.TP
.B \-\-memory\-short\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Memory (RAM) data. Show a one line RAM report in Memory. See \fB\-m\fR.
Sample: \fBReport: arrays: 1 slots: 4 modules: 2 type: DDR4\fR
New version, new tarball, new man page. Finally, after all these years, initial memory/ram support. This feature requires dmidecode, and usually that needs to be run as root. Significantly improved dmidecode error handling and output, and have as 2.1.90 testing/initial release basic ram data. In subsequent releases, extra info for -x and -xx and -xxx will be added as well to the output. For those who want to jump on board early for ram data, update your repos, for those who want to wait for the full featured version, with -x type data, wait for 2.2.0 And that's that.
2014-08-12 05:26:35 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-M \fR, \fB\-\-machine\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show machine data. Device, Motherboard, BIOS, and if present, System Builder
(Like Lenovo). Older systems/kernels without the required \fB/sys\fR data can
use \fBdmidecode\fR instead, run as root. If using \fBdmidecode\fR, may also
show BIOS/UEFI revision as well as version. \fB\-\-dmidecode\fR forces use of
\fBdmidecode\fR data instead of \fB/sys\fR. Will also attempt to show if the
system was booted by BIOS, UEFI, or UEFI [Legacy], the latter being legacy
BIOS boot mode in a system board using UEFI.
Device information requires either \fB/sys\fR or \fBdmidecode\fR. Note that
\fBother\-vm?\fR is a type that means it's usually a VM, but inxi failed to
detect which type, or positively confirm which VM it is. Primary VM
identification is via systemd\-detect\-virt but fallback tests that should also
support some BSDs are used. Less commonly used or harder to detect VMs may not
be correctly detected. If you get an incorrect output, post an issue and we'll
get it fixed if possible.
Due to unreliable vendor data, device type will show: desktop, laptop,
notebook, server, blade, plus some obscure stuff that inxi is unlikely to
ever run on.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-n \fR, \fB\-\-network\-advanced\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show Advanced Network device information in addition to that produced by
\fB\-N\fR. Shows interface, speed, MAC ID, state, etc.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-N \fR, \fB\-\-network\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show Network device(s) information, including device driver. With \fB\-x\fR,
shows Bus ID, Port number.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-o \fR, \fB\-\-unmounted\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
Show unmounted partition information (includes UUID and LABEL if available).
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Shows file system type if you have \fBlsblk\fR installed (Linux only). For
BSD/GNU Linux: shows file system type if \fBfile\fR is installed, and if you
are root or if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.B <username> ALL = NOPASSWD: /usr/bin/file (sample)
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
doas users: see \fBman doas.conf\fR for setup.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Does not show components (partitions that create the md\-raid array) of
md\-raid arrays.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
To show partition labels or UUIDs (when available and relevant), use with
\fB\-l\fR or\fB \-u\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-p \fR, \fB\-\-partitions\-full\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Show full Partition information (\fB\-P\fR plus all other detected mounted
partitions).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
To show partition labels or UUIDs (when available and relevant), use with
\fB\-l\fR or\fB \-u\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-P \fR, \fB\-\-partitions\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show basic Partition information.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Shows, if detected: \fB/ /boot /boot/efi /home /opt /tmp /usr /usr/home /var
/var/tmp /var/log\fR (for android, shows \fB/cache /data /firmware /system\fR).
If \fB\-\-swap\fR is not used, shows active swap partitions (never shows file
or zram type swap). Use \fB\-p\fR to see all mounted partitions.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
To show partition labels or UUIDs (when available and relevant), use with
\fB\-l\fR or\fB \-u\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-processes\fR
.br
See \fB\-t\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-r \fR, \fB\-\-repos\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
Show distro repository data. Currently supported repo types:
New version, tarball, man page. Added support for Alpine Linux apk package manager for the -r option. Fixed typos and glitches in man page as well.
2017-06-29 19:56:23 +00:00
\fBAPK\fR (Alpine Linux + derived versions)
man edit, forgot to note apt rpm support
2018-07-12 22:34:23 +00:00
\fBAPT\fR (Debian, Ubuntu + derived versions, as well as RPM based
man page fixes, lintian stuff.
2020-04-23 03:04:46 +00:00
APT distros like PCLinuxOS or Alt\-Linux)
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man page. Bugs: 1. Both a fix and a bug, in that inxi had an out of date list of Xorg drivers. This led to all the newer Intel devices failing to show their drivers in the Xorg driver lines, like i915, i965, and so on. Updated to full current list of Xorg drivers. This is not technically a bug since it's simply things that came into existence after that logic was last updated. But it looks like a bug. Fixes: 1. Issues #170 and #168 showed a problem with inxi believing it was running in IRC when Ansible or MOTD started inxi. This is because they are not tty so trip the non tty flag, which assumes it's in IRC in that case. The fix was to add a whitelist of known clients based on the parent name inxi discovers while running inside that parent. MOTD confirmed fixed, Ansible not confirmed. Why do people file issue reports then not follow them? Who knows. Note that this issue is easy to trip by simply doing this: echo 'fred' | inxi which disables the tty test as well. To handle that scenario, that is, when inxi is not first in the pipe, I added many known terminal client names to the whitelists. This works in my tests, though the possible terminals, or programs with embedded terminals, is quite large, but inxi handles most of them automatically. When it doesn't, file an issue and I'll add your client ID to the whitelist, and use --tty in the meantime. 2. Issue #171 by Vascom finally pinned down the wide character issue which manifests in some character sets, like greek or russian utf8. The fix was more of a work-around than a true fix, but inxi now simply checks the weather local time output for wide characters, and if detected, switches the local date/time format to iso standard, which is does not contain non ascii characters as far as I can tell. This seemed to fix the issue. 3. Added iso9660 from excluded file systems for partitions, not sure how inxi missed that one for so long. 4. See bug 1, expanded and made current supported intel drivers, and a few other drivers, so now inxi has all the supported xorg drivers again. Updated docs as well to indicate where to get that data. Enhancements: 1. As usual, more disk vendor/product ID matches, thanks to linuxlite hardware database, which never stops providing new or previously unseen disk ids. Latest favorite? Swissarmy knife maker victorinox Swissflash usb device. 2. Added Elive system base ID. 3. Added Nutyx CARDS repo type.
2019-01-01 05:11:01 +00:00
\fBCARDS\fR (NuTyX + derived versions)
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
\fBEOPKG\fR (Solus)
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBNIX\fR (NixOS + other distros as alternate package manager)
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBPACMAN\fR (Arch Linux, KaOS + derived versions)
\fBPACMAN\-G2\fR (Frugalware + derived versions)
decided have skills to edit
2012-09-15 09:18:08 +00:00
a few more man page edits, style stuff mostly.
2014-04-04 02:47:08 +00:00
\fBPISI\fR (Pardus + derived versions)
New version, tarball. Added urpmq for -r. Other distros than Mandriva, Mageia, no other changes so no need to update unless you want to. This adds support for Mandriva, Mageia. urpmq parsing is similar but not identical to pisi.
2013-10-05 01:40:00 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBPKG\fR (OpenBSD, FreeBSD, NetBSD + derived OS types)
small man page edit for consistency
2015-02-16 02:22:32 +00:00
\fBPORTAGE\fR (Gentoo, Sabayon + derived versions)
New version, updated man page, new tarball. Updated -r to for portage gentoo sources. This should work fine for all derived distros like Sabayon as well. The test looks for: /etc/portage/repos.conf/ and type -p emerge if found will then grab the repos from the source files found. Note that the logic for this was almost identical to that used for rpm so it was an easy addon. Please let us know if you have an issue and provide data samples of relevant files.
2015-02-16 02:17:58 +00:00
\fBPORTS\fR (OpenBSD, FreeBSD, NetBSD + derived OS types)
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBSCRATCHPKG\fR (Venom + derived versions)
typo fix in man page
2015-02-16 02:33:41 +00:00
\fBSLACKPKG\fR (Slackware + derived versions)
New version, updated man page, new tarball. Updated -r to for portage gentoo sources. This should work fine for all derived distros like Sabayon as well. The test looks for: /etc/portage/repos.conf/ and type -p emerge if found will then grab the repos from the source files found. Note that the logic for this was almost identical to that used for rpm so it was an easy addon. Please let us know if you have an issue and provide data samples of relevant files.
2015-02-16 02:17:58 +00:00
New version, man page. Fixes, enhancements, changes. Thanks: 1. AntiX forums, for testing -C --admin, suggestions, always helpful. Bugs: 1. Added switch to set @ps_gui, I forgot case where info block was only thing that used ps_gui (Nitrux kde nomad latte case). This led to no info: data if other ps_gui switches not activated. Now each block that can use it activates it. Fixes: 1. To clarify issue #161 added help/man explanation on how to get colors in cases where you want to preserve colors for piped or redirected output. Thanks fugo. 2. LMDE 3.0 released, slightly different system base handling, so refactored to add Debian version, see enhancement 2. Tested on some old vm instances, improved old system Debian system base id, but it's empirical, distro by distro, there is no rule I can use to automatically do it, sadly. 3. 'Motherboard' sensors field name added, a few small tweaks to sensors. This was in response to issue #159, which also raised a problem I was not really aware of, user generated sensor config files, that can have totally random field names. Longer term solution, start getting data from sys to pad out lm-sensors data, or to handle cases where no lm-sensors installed. 4. Fixed kwin_11 and kwin_wayland compositor print names, I'd left out the _, which made it look strange, like there were two compositors or something. 5. Fixed latte-dock ID, I thought the program name when running was latte, not latte-dock. inxi checks for both now. Thanks Nitrux for exposing that in vm test. 6. Sensors: added in a small filter to motherboard temp, avoid values that are too high, like SYSTIN: 118 C, filters out to only use < 90 C. Very unlikely a mobo would be more than 90C unless it's a mistake or about to melt. This may correct anoymous debugger dataset report from rakasunka. Enhancements: 1. Added --admin to -v 8 and to --debugger 2x 2. Expanded system base to use Debian version tool, like the ubuntu one, that lets me match version number to codename. The ubuntu one matches code names to release dates. Added Neptune, PureOS, Sparky, Tails, to new Debian system base handler. 3. Big enhancement: --admin -C now shows a nice report on cpu vulnerabilities, and has a good error message if no data found. Report shows: Vulnerabilities: Type: [e.g. meltdown] status/mitigation: text explanation. Note: 'status' is for when no mitigation, either not applicable, or is vulnerable. 'mitigation' is when it's handled, and how. Thanks issue #160 Vascom from Fedora for that request. 4. The never-ending saga of disk vendor IDs continues. More obscure vendors, more matches to existing vendors. Thanks linuxlite/linux hardware database Changes: 1. Reordered usb output, I don't know why I had Hubs and Devices use different ordering and different -x switch priorities, that was silly, and made it hard to read. Now shows: Device/Hub: bus-id-port-id[.port-id]:device-id info: [product info] type/ports: [devices/hubs] usb: [type, speed] -x adds drivers for devices, and usb: speed is now default for devices, same as Hubs. Why I had those different is beyond me. The USB ordering is now more sensible, the various components of each matching whether hub or device. Unfixable or Won't Fix: 1. Unable to detect Nomad desktop. As far as I can tell, Nomad is only a theme applied to KDE Plasma, there is no program by that name detectable, only a reference in ps aux to a theme called nomad. 2. Nitrux system base ID will not work until they correct their /etc/os-release file. 3. Tails live cd for some inexplicable reason uses non standard /etc/os-release field names, which forces me to either do a custom detection just for them, or for them to fix this bug. I opted for ignoring it, if I let each distro break standard formats then try to work around it, the distro ID will grow to be a 1000 lines long easily. Will file distro bug reports when I find these from now on. Samples: This shows the corrected, cleaned up, consistent usb output: inxi -y80 --usb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID usb: 1.1 Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse usb: 1.1 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse usb: 1.1 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> usb: 2.0 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network usb: 2.0 Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 inxi -y80 --usb -xxxz USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 chip ID: 1d6b:0002 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 chip ID: 03eb:0902 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID driver: cm109,snd-usb-audio interfaces: 4 usb: 1.1 chip ID: 0d8c:000e Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse driver: usbhid,wacom interfaces: 1 usb: 1.1 chip ID: 056a:0011 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 usb: 1.1 chip ID: 0d3d:0001 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> driver: N/A interfaces: 1 usb: 2.0 chip ID: 04a9:1909 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network driver: asix interfaces: 1 usb: 2.0 chip ID: 05ac:1402 serial: <filter> Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 chip ID: 1d6b:0003 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 chip ID: 1d6b:0003
2018-09-07 20:58:55 +00:00
\fBTCE\fR (TinyCore)
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
\fBURPMI\fR (Mandriva, Mageia + derived versions)
a few more man page edits, style stuff mostly.
2014-04-04 02:47:08 +00:00
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
\fBXBPS\fR (Void)
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\fBYUM/ZYPP\fR (Fedora, Red Hat, Suse + derived versions)
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
More will be added as distro data is collected. If yours is missing please
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
show us how to get this information and we'll try to add it.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
See \fB\-rx\fR, \fB\-rxx\fR, and \fB\-ra\fR for installed package count
information.
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-R \fR, \fB\-\-raid\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Show RAID data. Shows RAID devices, states, levels, device/array size,
and components. See extra data with \fB\-x\fR / \fB\-xx\fR.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
md\-raid: If device is resyncing, also shows resync progress line.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note: supported types: lvm raid, md\-raid, softraid, ZFS, and hardware RAID.
Other software RAID types may be added, if the software RAID can be made to
give the required output.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The component ID numbers work like this: mdraid: the numerator is the actual
mdraid component number; lvm/softraid/ZFS: the numerator is auto\-incremented
counter only. Eg. \fBOnline: 1: sdb1\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
If hardware RAID is detected, shows basic information. Due to complexity
of adding hardware RAID device disk / RAID reports, those will only be added
if there is demand, and reasonable reporting tools.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-recommends\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Checks inxi application dependencies and recommends, as well as directories,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
then shows what package(s) you need to install to add support for each feature.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-s \fR, \fB\-\-sensors\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show output from sensors if sensors installed/configured: Motherboard/CPU/GPU
temperatures; detected fan speeds. GPU temperature when available. Nvidia shows
screen number for multiple screens. IPMI sensors are also used (root required)
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
if present. See Advanced options \fB\-\-sensors\-use\fR or
\fB\-\-sensors\-exclude\fR if you want to use only a subset of all sensors, or
exclude one.
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-slots\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show PCI slots with type, speed, and status information.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-swap\fR
.br
See \fB\-j\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-S \fR, \fB\-\-system\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show System information: host name, kernel, desktop environment (if in X),
distro. With \fB\-xx\fR show dm \- or startx \- (only shows if present and
running if out of X), and if in X, with \fB\-xxx\fR show more desktop info,
man edits
2018-08-28 23:26:41 +00:00
e.g. taskbar or panel.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-t \fR, \fB\-\-processes\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
[\fBc\fR|\fBm\fR|\fBcm\fR|\fBmc NUMBER\fR] Show processes. If no arguments,
defaults to \fBcm\fR. If followed by a number, shows that number of processes
for each type (default: \fB5\fR; if in IRC, max: \fB5\fR)
decided have skills to edit
2012-09-15 09:18:08 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Make sure that there is no space between letters and numbers (e.g. write as
\fB\-t cm10\fR).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t c\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\- CPU only. With \fB\-x\fR, also shows memory for that process on same line.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t m\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- memory only. With \fB\-x\fR, also shows CPU for that process on same line.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
If the \fB\-I\fR or \fB\-m\fR lines are not triggered, will also show the
system RAM used/total information.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t cm\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- CPU+memory. With \fB\-x\fR, shows also CPU or memory for that process on
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
same line.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-u \fR, \fB\-\-uuid\fR
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
Show partition UUIDs. Use with \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, and \fB\-P\fR
to show partition labels. Does nothing without one of those options.
Sample: \fB\-opju\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-U \fR, \fB\-\-update\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note \- Maintainer may have disabled this function.
editing the man page, let's see if it improves.
2014-04-03 18:28:18 +00:00
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
If inxi \fB\-h\fR has no listing for \fB\-U\fR then it's disabled.
editing the man page, let's see if it improves.
2014-04-03 18:28:18 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Auto\-update script. Note: if you installed as root, you must be root to
update, otherwise user is fine. Also installs / updates this man page to:
\fB/usr/local/share/man/man1\fR (if \fB/usr/local/share/man/\fR exists
AND there is no inxi man page in \fB/usr/share/man/man1\fR, otherwise it
goes to \fB/usr/share/man/man1\fR). This requires that you be root to write
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
to that directory. See \fB\-\-man\fR or \fB\-\-no\-man\fR to force or disable
man install.
edit of man.1 page, fixed error in man location. irrelevant for distro maintainers.
2017-01-05 00:23:16 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-usb\fR
.br
See \fB\-J\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
redid patches, I think
2021-08-25 03:39:33 +00:00
.B \-V\fR, \fB\-\-version\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
inxi version information. Prints information then exits.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-v \fR, \fB\-\-verbosity\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Script verbosity levels. If no verbosity level number is given, 0 is assumed.
Should not be used with \fB\-b\fR or \fB\-F\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
Supported levels: \fB0\-8\fR Examples :\fB inxi \-v 4 \fR or \fB inxi \-v4\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 0
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Short output, same as: \fBinxi\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 1
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Basic verbose, \fB\-S\fR + basic CPU (cores, type, average clock speed, and
min/max speeds, if available) + \fB\-G\fR + basic Disk + \fB\-I\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 2
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds networking device (\fB\-N\fR), Machine (\fB\-M\fR) data, Battery
(\fB\-B\fR) (if available). Same as: \fBinxi \-b\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 3
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds advanced CPU (\fB\-C\fR) and network (\fB\-n\fR) data; triggers
\fB\-x\fR advanced data option.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 4
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds partition size/used data (\fB\-P\fR) for (if present): \fB/ /home /var/
/boot\fR. Shows full disk data (\fB\-D\fR)
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 5
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds audio device (\fB\-A\fR), memory/RAM (\fB\-m\fR), bluetooth data
(\fB\-E\fR) (if present), sensors (\fB\-s\fR), RAID data (if present), partition
label (\fB\-l\fR), UUID (\fB\-u\fR), full swap data (\fB\-j\fR), and short form
of optical drives.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 6
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds full mounted partition data (\fB\-p\fR), unmounted partition data
(\fB\-o\fR), optical drive data (\fB\-d\fR), USB (\fB\-J\fR); triggers
\fB\-xx\fR extra data option.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 7
Thanks manjaro user alven for finding a bunch of corner and not so corner case errors, glitches, documentation oversights, etc. This is a point release between the coming full CPU refactor and the current set of bug fixes and issue handlings. This release also contains the debuggers for the new CPU data logic, which are important to get this CPU refactor stable and reliable across old/new systems, different operating systems and platforms. Wanted to do this intermediate releaase to get the current fixes out, which make inxi overall better for CPU issues, but do not handle the core requirement to do a full refactor. -------------------------------------------------------------------------------- CORRECTION: 1. On release notes for 3.3.08: due to a long delay to get real debugger data from the person who had the issue, but finally getting it after the release of 3.3.08, there was NO bug in ps wwaux output. Something else was creating the linewraps, maybe the subshell, it's basically impossible to know since we never got a real debugger data set, which is the only real way to get the actual same data inxi will see. Was it a subshell wrapping the output? We just can't know, nor are we likely to ever find out. This highlights very well however why some issues are essentially impossible to ever fully resolve without the --debug 22 dataset. This bug/fix is definitely in that class of issues. It's never good to accuse another program of having a bug when it doesn't, so sorry to ps authors, no bug or issue exists for ps in this area. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. wiryonolau issue #259 points out that if --tty is used, default IRC filter rule is still active and on. Because his case appears to be from an autostart using Bash, which then gives up to find the parent at dash, which then makes inxi believe it's in an IRC shell client, that issue doesn't appear to be resolvable. -------------------------------------------------------------------------------- BUGS: 1. Documentation, help menu and man page showed wmctl instead of wmctrl, which for someone who reads the help man, leads to command --fake wmctl failing. Thanks manjaro user alven for finding this typo. 2. For dmidecode cpu data, had global total values for cache that could result in wrong output values, 2x or more wrong for L1 / L3 cache on linux. Difficulty is preserving that data for bsd, which in general do not show phys cpu counts, and thus make showing totals off. Created new '-total' item for each L cache type, which will handle > 1 cpus, and also can be used to determine if > 1 cpus present!. 3. Manjaro user pointed out that hub types were wrong, this is because inxi was using the INTERFACE ID values for hubs instead of the TYPE values. For all other device types, INTERFACE is correct, but for hubs, we needed TYPE, so fix is to detect INTERFACE 9/0/0 and if TYPE present for that, swap. -------------------------------------------------------------------------------- FIXES: 1. For > 1 cpu systems, with dmidecode sourced cpu cache data, can now determine physical cpu count based on comparing L2 and L2-total values. This means that when dmidecode is used on BSD for CPU data, inxi may now be able to deduce that it is a > 1 cpu system. 2. Forgot to set $run{'filter'} to 0 for whitelist start client detection. 3. Going along with bug 3, changed 'Full speed (or root) hub' to: Full speed or root hub, to make more clear that it's one or the other, or both. 4. For apply_filter(), added test if <superuser required> just return the string. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug 1, and fix 1, for > 1 cpu systems, will now show for all cache: items L1: 2x 1.5 MiB (3 MiB), same for L2 and L3. This is far less confusing than showing the totals without explaining what they are. 2. Going along with 1, now root is not required to show L1 and L3 -Cxx on Linux as long as the system is reasonably new, about after 2008, and has getconf -a supported. That support is came in somewhere around 2.10, not sure exactly when. Debian Etch had it, Sarge did not, Ubuntu 9.10 had it. Tinycore does not have getconf at all. This will probably be replaced by a more robust full cpu /sys data tool. 3. Added ht to default short -Cx flag list, that should show, and it's short. 4. Added --no-filter to activate -Z, --filter-override isn't consistent with other --no-xxx options, even I forgot it. No changes, just another way to use -Z. 5. For issue #260 added pch as a new sensor output type, it's kind of a builtin southbridge / northbridge in the CPU die, but it's not a core, and has a different temp. Will anyone even know what pch is? probably not, but who cares. -------------------------------------------------------------------------------- CHANGES: 1. No longer showing for > 1 physical cpu systems the sum total of L1/2/3 cache data. Now shows per cpu L1/L2/L3, and if > 1 cpu, shows for example: cache: L1: 2x 512 KiB (1024 KiB) L2: 2x 2 MiB (4 MiB) L3: 2x 20 MiB (40 MiB) For single physical cpu output remains the same: cache: L1: 576 KiB L2: 3 MiB L3: 16 MiB -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated help/man for L1/L3 cache -Cxx changes. 2. Updated man and help to suggest -Z for --tty. 3. Forgot to note -v 7 adds -f, added to man/help. -------------------------------------------------------------------------------- CODE: * Added 'getconf -a' to debugger, that may be usable for cpu cache data, need to gather data on that to confirm. that's regading issue #257 cache glitches. 2. Removed all * $physical_count for cache data in cpu_properties, that is now handled by creating string with cpu count, per cpu caches, and total in parens. 3. Added in fallback failure case for the ZFS file system issue exposed by accident in issue #258 - will now log in debugger the error, so we can try to find what is going on there, impossible to reproduce until we find what zfs or more likely, freebsd, changed there. Could be hyper specific, some weird thing like a person making a zfs device name with space, impossible to guess. Note that since the freebsd user declined to supply any data to help resolve this issue, then closed it, we're back where we usually end up with FreeBSD issues, either a Linux user (or worse, me) willing and able to find the issue and supply the debugger data required shows up, OR the issue is ignored as valid but impossible to resolve. RANT: Note that this also confirmed to me that in order to preserve my own sanity and not waste endless hours trying to get data, from now on, unless utterly trivial, if a FreeBSD user refuses to promptly supply the required data, the issue will be closed with a freebsd-closed-no-data-supplied label, which means, valid but not possible to solve due to user refusing to help me help them. Come on FreeBSD users!! If you want help, and inxi to support your distro, help me help you!! If not, then why are you even filing an issue in the first place? Do you expect faeries to spread magic bug / issue fixing faerie dust over inxi and then activate it with their little wands? This is growing tiresome to be honest because it's so utterly predictable. 4. Shuffled order of sensor type detections, there was a slim chance that a non gpu sensor type could have string intel in it, so put the gpu sensors second to last, before 'main'. 5. Started refactor of cpu core/cache logic. Added feature to cpu_arch, and changed it to cpu_info since now it gives by vendor/family/model/stepping both micorarch and cache/core math array returns. Also started refactor to make more predictable, with increased comments, about what is going on in cpu_properties to avoid breaking existing correct results. 6. Added to --debug /sys cpu data globber tool, that will help debugging the new /sys cpu data feature, will let me insert the file data directly into the logic. 7. Added CpuItem::cpu_data_sys() with debuggers, that will now start collecting user cpu data whenever the debugger is run, though it's not active yet. 8. Set $Data::Dumper::SortKeys = 1; dugh, could have saved big headaches if had found this before. Makes all keys sorted cleanly, gets rid of random hash sorts.
2021-11-22 20:47:54 +00:00
\- Adds network IP data (\fB\-i\fR), forced bluetooth (\fB\-E\fR), Logical
(\fB\-L\fR), RAID (\fB\-R\fR), full CPU flags/features (\fB\-f\fR), triggers
\fB\-xxx\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 8
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- All system data available. Adds Repos (\fB\-r\fR), PCI slots
(\fB\-\-slots\fR), processes (\fB\-tcm\fR), admin (\fB\-\-admin\fR). Useful for
testing output and to see what data you can get from your system.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-w \fR, \fB\-\-weather\fR
Adds weather line. To get weather for an alternate location, use \fB\-W
[location]\fR. See also \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR options. Please note
that your distribution's maintainer may chose to disable this feature.
New version, new man. Weather explanations, disks, bugs!! Bugs: 1. For sensors, in some cases, gpu failed to show correctly. This should be corrected. Fixes: 1. Made help/man explanations of weather changes more clear. Particularly in regards to no automated query info. But also for supported location syntaxes. 2. Some corner cases of null weather data return null and tripped a null data error. This is corrected. 3. Added city duplicate filter to weather output, this hopefully will in some cases avoid printing city name twice, depends on weather source. 4. Removed --weather-source option 0, that no longer works so all code was removed. 5. More deb822 fixes, loosened up even more syntax. That's a poorly designed config syntax, hard to work with. Enhancements: 1. Lots of new disk vendors. So many!! Thanks linux-lite hardware database! switched to a new method of getting disk name/vendor data, now it's a lot easier to check for new ones. 2. Added fancybar to desktop info.
2019-03-29 21:11:22 +00:00
Many small updates, enhancements, bug fixes!!! We've been saving them up!! Here they are!! Don't wait!! Thanks mr. mazda for many issue finds, and suggestions. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. Due to unfixable rpm slowdowns, removed package counts for default output for rpm based systems. We were seeing delays of up to 30+ seconds just to list the rpm package count, which is absurd, even after the rpm optimizations inxi already runs. To allow rpm users to get excluded by default for rpm package list counts, added --pkg flag plus a short message telling them to use that flag to get the installed package count if they want it. Changes like this are very unfortunate, but in 2021 for a package manager at times to require over 30 seconds to generate a trivial installed package list is just not acceptable. One of the reasons this release was delayed was this was not an easy decision to make, it's very rare support for a feature is removed for specific tools due to how badly the tools may perform. Note that whatever higher level tool is used, like dnf, zypp, it's still the same speed, they all appear to use the same core engine. Basically this decision was forced since either inxi looks really bad and slow, when it's not, or the actual cause was removed from default outputs. -------------------------------------------------------------------------------- BUGS: 1. Small bug in nfs blacklist for disk used led to nfs used being added, which leads to silly used percents. This is corrected. 2. If ram vendor ID failed, inxi would delete the part number. Oops. This was related to the Mushkin failures. 3. Close to a bug, though not one internally, but to users would appear as one: ZFS does not act as expected, zpool list did not in fact return the pool size, which I had always assumed to be the case, but in a very strange decision, does return something very close to the pool size for mirrors, but NOT for z1 or z2 pools, then it returns the total size of the drives that make up the pool. To call this strange behavior would be an understatement. The fix was to modify the logic to use zfs list instead to get the size data. This also makes the drive total report far more accurate, since it lists usable space now for ZFS as was always intended. The cause of this was simply that I'd always had access to zfs mirrors, not z1 or z2 arrays. -------------------------------------------------------------------------------- FIXES: 1. OpenSuse and maybe others use kdm3 for Trinity, not kdm, so dm was failing. 2. Going along with fix 1, made kde version detection more robust so may catch more fringe / corner cases for kde desktops. These were mainly added to correct Trinity desktop version detections. 3. Mushkin ram vendor ID was failing, that is or should be corrected. 4. Added in /dev/disk/by-id handlers for zpool components, there are several variants, wwn-, pci-, scsi-, ata-, but they all map to the real /dev drive IDs. Failure to unmap these led to failing to match components and get size info etc for zfs. 5. See DOCUMENTATION: 2, language changes for weather feature abuse. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going along with the rpm issues, added dnf.conf support to yum/dnf repo types. Not sure how that one was missed, but there it is. This should tighten repo reports for dnf/yum/zypp types. 2. Added LeftWM. LeftWM confirmed working. Added unverifed detections for: penrose, 2bwm, 5dwm, catwm, mcwm, monsterwm, snapwm, uwm, wingo, wmfs, wmfs2. 3. Added xfwm as a compositor type, that had bee left out, somewhat on purpose, since xfwm can run in compositing or non compositing mode. But should show since many users use compositing mode now. 4. Added OpenMediaVault distro ID and systembase handlers. 5. Going along with zfs bug fix 3, using zfs list data for free, size, allocated. Trying to understand how zfs developers actually thought about this is nearly impossible so just used what seems to correspond to reality most. Also shows raw values for zfs data in RAID along with regular ones to make clear which is which value. 6. Added more CPU architecture ID matches for AMD Zen and a variety of Intel. Both vendors finally released some new CPUs and the data became available, which doesn't always happen quickly. 7. A bunch of new disk vendors and vendor IDs added. Never stops, like the sands of time, like the ocean waves, like the scuttling crabs scrounding around in the seaweed in the foam where the outgoing wave left its mark... -------------------------------------------------------------------------------- DOCUMENTATION: 1. Added leftwm keybindinigs to inxi-data.txt desktop/wm section. Updated more wm in that section as well, and list more info on wms for future reference etc. Also reorganized and more more readable wm section. 2. Help/Man now make more clear that automated requests or excessive use of the inxi weather feature are not under any circumstance permitted. There had been some ambiguity and lack of clarity about what abuse is, now it should be more clear. -------------------------------------------------------------------------------- CODE CHANGES: 1. Refactored uptime parser logic, the code and regex was just getting too messy and difficult to work with and debug, now it works similar to how the revised BSD parsers run, the regex are pulled apart and made more granular so a small syntax change ideally won't break the detections as easily. 2. Cleaned up sub cpu_arch() and made all the arch values line up nicely, over time I notice that almost invariably stuff done to save lines of code makes code harder to read as the feature expands, so it's generally worth just unravelling it so it all stacks and is easy to scan/read. Also removed extra white space in parens, which is something I'm leaning more towards but it's not worth fixing all at once so it's just done where it's noticed. That's using: if ( /test/ ){ rather than: if (/test){ I believe using more white space helped with Perl comprehension in the intermediate stages, but is not required anymore and just looks like extra whitespace now.
2021-07-12 02:32:13 +00:00
DO NOT USE THIS FEATURE FOR AUTOMATED WEATHER UPDATES! Automated or excessive
use will lead to your being blocked from any further access. This feature is not
meant for widget type weather monitoring, or Conky type use. It is meant to get
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
weather when you need to see it, for example, on a remote server. If you did not
type the weather option in manually, it's an automated request.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New tarball, version, man page. Improved remote weather, now it uses -W, and deprecated -! location=.. That was too hard to type and too hard to remember. Also do more dyanamic reordering of weather output, depending on how much data is present, and how many x options are used. Added error handling for generic deprecated options, and for options that do not have the correct syntax for OPTARG, like with -W. This should about do it for the weather option for now unless I missed something somewhere.
2013-05-26 03:19:38 +00:00
.TP
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
.B \-W\fR, \fB\-\-weather\-location <location_string>\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Get weather/time for an alternate location. Accepts postal/zip code[, country],
city,state pair, or latitude,longitude. Note: city/country/state names must
not contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces
around any commas. Postal code is not reliable except for North America and
maybe the UK. Try postal codes with and without country code added. Note that
City,State applies only to USA, otherwise it's City,Country. If country name
(english) does not work, try 2 character country code (e.g. Spain: es;
Great Britain: gb).
See \fIhttps://en.wikipedia.org/wiki/ISO_3166\-1_alpha\-2\fR for current 2
letter country codes.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
Use only ASCII letters in city/state/country names.
New version, new man. A few more modifications to weather. Fixes: 1. In case with zero wind speed, it now shows zero, not N/A, as expected. Enhancements: 1. Depending on weather source used: * Shows precipitation, not rain/snow. * Adds Sunrise/sunset (most sources do not have this)
2019-02-08 04:52:41 +00:00
Examples: \fB\-W 95623,us\fR OR \fB\-W Boston,MA\fR OR
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
\fB\-W 45.5234,\-122.6762\fR OR \fB\-W new+york,ny\fR OR \fB\-W bodo,norway\fR.
New version, new man. Weather explanations, disks, bugs!! Bugs: 1. For sensors, in some cases, gpu failed to show correctly. This should be corrected. Fixes: 1. Made help/man explanations of weather changes more clear. Particularly in regards to no automated query info. But also for supported location syntaxes. 2. Some corner cases of null weather data return null and tripped a null data error. This is corrected. 3. Added city duplicate filter to weather output, this hopefully will in some cases avoid printing city name twice, depends on weather source. 4. Removed --weather-source option 0, that no longer works so all code was removed. 5. More deb822 fixes, loosened up even more syntax. That's a poorly designed config syntax, hard to work with. Enhancements: 1. Lots of new disk vendors. So many!! Thanks linux-lite hardware database! switched to a new method of getting disk name/vendor data, now it's a lot easier to check for new ones. 2. Added fancybar to desktop info.
2019-03-29 21:11:22 +00:00
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
DO NOT USE THIS FEATURE FOR AUTOMATED WEATHER UPDATES! Automated or excessive
use will lead to your being blocked from any further access. This feature is not
meant for widget type weather monitoring, or Conky type use. It is meant to get
weather when you need to see it, for example, on a remote server. If you did not
type the weather option in manually, it's an automated request.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
.TP
.B \-\-weather\-source\fR, \fB\-\-ws <unit>\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
[\fB1\-9\fR] Switches weather data source. Possible values are \fB1\-9\fR.
\fB1\-4\fR will generally be active, and \fB5\-9\fR may or may not be active,
so check. \fB1\fR may not support city / country names with spaces (even if
you use the \fB+\fR sign instead of space). \fB2\fR offers pretty good data,
but may not have all small city names for \fB\-W\fR.
New version, new man. Weather explanations, disks, bugs!! Bugs: 1. For sensors, in some cases, gpu failed to show correctly. This should be corrected. Fixes: 1. Made help/man explanations of weather changes more clear. Particularly in regards to no automated query info. But also for supported location syntaxes. 2. Some corner cases of null weather data return null and tripped a null data error. This is corrected. 3. Added city duplicate filter to weather output, this hopefully will in some cases avoid printing city name twice, depends on weather source. 4. Removed --weather-source option 0, that no longer works so all code was removed. 5. More deb822 fixes, loosened up even more syntax. That's a poorly designed config syntax, hard to work with. Enhancements: 1. Lots of new disk vendors. So many!! Thanks linux-lite hardware database! switched to a new method of getting disk name/vendor data, now it's a lot easier to check for new ones. 2. Added fancybar to desktop info.
2019-03-29 21:11:22 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Please note that the data sources are not static per value, and can change any
time, or be removed, so always test to verify which source is being used for
each value if that is important to you. Data sources may be added or removed
on occasions, so try each one and see which you prefer. If you get unsupported
source message, it means that number has not been implemented.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man page, new tarball. Added -y [integer >= 80] option. This allows for absolute override of width settings. This overrides any dynamically detected widths, as well as the globals: COLS_MAX_CONSOLE='115' COLS_MAX_IRC='105' Now that inxi widths are largely dynamic in terminal, with a few lingering exceptions, it made sense to also allow for overrides of this. This is useful in cases where for example you want to output inxi to text file or for other purposes, or if you just want to test the widths, as in my case. -y cannot be used with --recommends, but otherwise it works fine, with --help/-c 94-99 you have to put -y first in the list of options. Example: inxi -v7 -y150 > inxi.txt will ignore the terminal settings and output the lines at basically max length.
2014-04-03 17:46:31 +00:00
.TP
tiny man glitch, fixed
2018-05-13 01:13:48 +00:00
.B \-\-weather\-unit <unit>\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
[\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR] Sets weather units to metric (\fBm\fR),
imperial (\fBi\fR), metric (imperial) (\fBmi\fR, default), imperial (metric)
(\fBim\fR). If metric or imperial not found,sets to default value, or \fBN/A\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.SH FILTER OPTIONS
The following options allow for applying various types of filtering to the
output.
New version, new man. Bug fixes, feature updates. The main reason to release this earlier than I had hoped was because of the /sys permission change for serial/uuid file data. The earlier we can get this fix out, the better for end users, otherwise they will think they have no serial data when they really do. FIXES: 1. this bug just came to my attention, apparently the (I assume) kernel people decided for us that we don't need to see our serial numbers in /sys unless we are root. This is an unfortunate but sadly predictable event. To work around this recent change (somewhere between 4.14 and 4.15 as far as I can tell), inxi -M and -B now check for root read-only and show <root required> if the file exists but is not user readable. I wish, I really wish, that people could stop changing stuff for no good reason, but that's out of my control, all I can do is adjust inxi to this reality. But shame on whoever decided that was a good idea. This is not technically an inxi bug, but rather a regression, since it's caused by a change in /sys permissions, but users would see it as a bug so I consider this an important fix. Note that the new /sys/class/dmi/id permissions result in various possible things: 1. serial/uuid file is empty but exists and is not readable by user 2. serial/uuid file is not empty and exists and is not readable by user 3. serial/uuid file does not exist 4. serial/uuid file exists, is not empty, and is readable by root Does this change make your life better? It doesn't make mine better, it makes it worse. Consider filing a bug report against whoever allowed this regression is my suggestion. BUGS: 1. A weather bug could result in odd or wrong data showing in weather output, this was due to a mistake in how the weather data was assembled internally. This error could lead to large datastore files, and odd output that is not all correct. 2. More of an enhancement, but due to the way 'v' is used in version numbers, the program_version tool in some cases could have sliced out a 'v' in the wrong place in the version string, and also could have sliced out legitimate v values. This v issue also appeared in bios version, so now the new rule for program_version and certain other version results is to trim off starting v if and only if it is followed by a number. FEATURES: 1. Added in OpenBSD support for showing machine data without having to use dmidecode. This is a combination of systcl -a and dmesg.boot data, not very good quality data sources, but it is available as user, and it does work. Note that BIOS systems are the only ones tested, I don't know what the syntax for UEFI is for the field names and strings. Coming soon is Battery and Sensors data, from the same sources. Sadly as far as I know, OpenBSD is the only BSD that has such nice, usable (well, ok, dmesg.boot data is low quality strings, not really machine safe) data. I have no new datasets from the other BSDs so I don't know if they have decided to copy/emulate this method. 2. By request, and this was listed in issue #134, item no. 1, added in weather switchable metric/imperial output. Also added an option, --weather-unit and configuration item: WEATHER_UNIT with possible values: cf|fc|c|f. The 2nd of two in cf/fc goes in () in the output. Note that windspeed is m/s or km/h as metric, inxi shows m/s as default for metric and (km/h as secondary). Also fixed -w observation date to use local time formatting. That does not work in -W so it shows the default value. 3. Updated man to show new WEATHER_UNIT config option, and new --weather-unit option. Also fixed some other small man glitches that I had missed.
2018-05-11 20:53:26 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-filter \fR, \fB\-\-filter\-override\fR
.br
See \fB\-z\fR, \fB\-Z\fR.
Big change, cleanup, small bug fixes. Hot, grab it now!! The new -y 1 feature exposed several small and larger glitches with how sets of data were constructed in inxi output. See Changes: for list of changes made to improve or fix these glitches. These errors and minor output inconsistencies became very obvious when I was doing heavy testing of -y 1, so I decided to just fix all of them at the same time, plus it was very hard to make the -y 1 indenter work as expected when the key values were not being treated consistently. Note that this completes the set of all possible -y results: Full -y Options: 1. -y [no integer given] :: set width to a default of 80. this is what you usually want for forum posts, or for online issue reports, because it won't wrap and be hard to read. Help us help your users and others!! Teach them to use for example -Fxzy or -bay for their bug reports. Just add y to whatever collection of arguments you generally ask for in support forums or issue reports. Highly recommended, easy to type, and joins cleanly with other letters. 2. -y -1 :: removes line width limits, this can lead to very long lines in some cases, and removes all auto-wrapping of line widths. 3. -y 1 :: Switch to stacked key: value pairs, with primary data blocks separated by a blank line. Think dmidecode type output, or other command line sys info tools. By request, a forum support guy noted it was hard for newbies to understand the -G values, particularly -Ga when in lines, so this is another way to request data. WARNING: for lots of data, this gets really long!!! But if you are curious how inxi actually constructs its data internally, this sort of shows it. 4. -y 80-xx :: set width to 80 or greater. Note you can also set these in your configurations if you want using the various options supported. ----------------------------------- Bugs: 1. Once again, no real bugs found beyond a few trivial things I can't remember. Fixes: 1. When out of X, dm: showed after Console: and often said dm: N/A particularly on headless servers, which was silly. Now DM: only shows after Console: if a DM: was actually found. If regular Desktop output, either in X, or via --display out of X, no changes. 2. There was a pointless sudo test when sudo values are set initially, they were still running even if --no-sudo was used. Now they don't run in that case. Enhancements: 1. The biggie, now inxi can output in a similar indented way as something like dmidecode if you use the -y 1 option. This feature was originally by request, though the initial request actually just wanted to see it stacked simply, but that was almost impossible to read for any output reasonably long, so I made the indentations very dynamic and deep, they go up to 4 levels in, which is roughly how deep in the inxi sub Categories go. This output format makes it very easy to see how inxi 'thinks' about its data, how it views sets, subsets, subsubsets, and subsubsubsets of data. Note that each data block, as with dmidecode data, is separated by a blank line. You know what this means!!! Yes, that's right!!! You can parse inxi output with awk!!, same way legacy bash+gawk inxi used to parse its data!! Or if your brain just does not like lines of data, you can make it appear in indented single key: value pairs. Here you can see for example that 1 Xorg Display has 1 or more Screens, and each Screen has one or more Monitors. Note that this -Ga data first appeared in inxi 3.1.00. Sample [with bug in OpenGL output!, and showing -Ga newer values as well for dual monitor setup, with one Xorg Screen]: inxi -aGy1 Graphics: Device-1: NVIDIA GT218 [GeForce 210] vendor: Gigabyte driver: nouveau v: kernel bus ID: 09:00.0 chip ID: 10de:0a65 Display: x11 server: X.Org 1.20.8 driver: nouveau unloaded: fbdev,modesetting,vesa display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1024 s-dpi: 96 s-size: 677x271mm (26.7x10.7") s-diag: 729mm (28.7") Monitor-1: DVI-I-0 res: 1280x1024 hz: 60 dpi: 96 size: 338x270mm (13.3x10.6") diag: 433mm (17") Monitor-2: VGA-0 res: 1280x1024 hz: 60 dpi: 86 size: 376x301mm (14.8x11.9") diag: 482mm (19") OpenGL: renderer: N/A v: N/A direct render: N/A 2. Refactored and cleaned up print_data(), got rid of some early testing code, dumped some unnecessary tests, simplified old tests, and optimized the new indentation logic reasonably well. Hopefully the print_data() will not be quite as much of a black box now as it was. 3. Even more drive vendors and ID matches!!! The list never ends!! An endless series of new vendors and IDs of existing vendors sprout up, then float away. And inxi follows them to the best of its ability. Thanks again to Linux-Lite hardware database, which help make this ever expanding list possible, since their users appear to use every disk known to humankind. Changes: 1. When out of Display, and Console: shows, -S will not show dm: if no display manager is detected, and if it is detected, it shows DM: since it's not part of the Console: set of data. If out of X and --display is used to get Xorg data out of X, it will show Desktop: set of data as normal, at least it will show the stuff it can find. This resolves the issue where dm: appeared to be a member of the set of Console: data, instead of either its own thing, DM:, or a member of the set of Desktop: data. 2. For RAID Devices with sub Array-x: values, Array-x: is capitalized, it used to be array-x: That was silly. 3. In USB, now Device-x: resets inside each Hub: so that the Device-x: are numbered starting at 1 within each Hub:. This makes the counter behavior act the same as it does in for example RAM Array-x: / Device-y:, where each Array-x: resets Device-y: count to 1. This changes the old default of having Device-x: not reset, to let you see the total number of devices plugged in or attached no matter which hub they were plugged into, but the output actually gets sort of confusing in single key: value pair mode per line. 4. The key: value syntax for weather was changed completely, now it works like the rest of the features, with Report:... [Forecast:...] Locale:... and Source:. Locale makes the source of the times and other date related features, and the location if shown or available, much more obvious. Before it was never clear if Current Time referred to your local or the remote time, now it's clearly from the Locale: you specified with -W, or the default -w local info. Also made Report 1 line if unwrapped, Forecast 1 line if not wrapped, and Locale: 1 line if not wrapped, which makes the output easier to read. NOTE: automated weather queries are NOT allowed, if you do it, you will be banned!! inxi is NOT a desktop weather app!! Don't confuse it with one!! Weather is just a small service to users who might for example want to check the weather on a remote system, or something like that, and is not intended to be used on a routine basis. 5. Cleaned up and re-ordered the --version output. It had some pretty old contexts in the language, which were removed or cleaned up and brought up to date. If you're wondering, I roughly use rsync and nano --version as guides for what to show or not show there.
2020-06-12 07:47:10 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.TP
.B \-\-filter\-label\fR, \fB\-\-filter\-uuid\fR, \fB\-\-filter\-vulnerabilities\fR
.br
See \fB\-\-zl\fR, \fB\-\-zu\fR, \fB\-\-zv\fR.
Big change, cleanup, small bug fixes. Hot, grab it now!! The new -y 1 feature exposed several small and larger glitches with how sets of data were constructed in inxi output. See Changes: for list of changes made to improve or fix these glitches. These errors and minor output inconsistencies became very obvious when I was doing heavy testing of -y 1, so I decided to just fix all of them at the same time, plus it was very hard to make the -y 1 indenter work as expected when the key values were not being treated consistently. Note that this completes the set of all possible -y results: Full -y Options: 1. -y [no integer given] :: set width to a default of 80. this is what you usually want for forum posts, or for online issue reports, because it won't wrap and be hard to read. Help us help your users and others!! Teach them to use for example -Fxzy or -bay for their bug reports. Just add y to whatever collection of arguments you generally ask for in support forums or issue reports. Highly recommended, easy to type, and joins cleanly with other letters. 2. -y -1 :: removes line width limits, this can lead to very long lines in some cases, and removes all auto-wrapping of line widths. 3. -y 1 :: Switch to stacked key: value pairs, with primary data blocks separated by a blank line. Think dmidecode type output, or other command line sys info tools. By request, a forum support guy noted it was hard for newbies to understand the -G values, particularly -Ga when in lines, so this is another way to request data. WARNING: for lots of data, this gets really long!!! But if you are curious how inxi actually constructs its data internally, this sort of shows it. 4. -y 80-xx :: set width to 80 or greater. Note you can also set these in your configurations if you want using the various options supported. ----------------------------------- Bugs: 1. Once again, no real bugs found beyond a few trivial things I can't remember. Fixes: 1. When out of X, dm: showed after Console: and often said dm: N/A particularly on headless servers, which was silly. Now DM: only shows after Console: if a DM: was actually found. If regular Desktop output, either in X, or via --display out of X, no changes. 2. There was a pointless sudo test when sudo values are set initially, they were still running even if --no-sudo was used. Now they don't run in that case. Enhancements: 1. The biggie, now inxi can output in a similar indented way as something like dmidecode if you use the -y 1 option. This feature was originally by request, though the initial request actually just wanted to see it stacked simply, but that was almost impossible to read for any output reasonably long, so I made the indentations very dynamic and deep, they go up to 4 levels in, which is roughly how deep in the inxi sub Categories go. This output format makes it very easy to see how inxi 'thinks' about its data, how it views sets, subsets, subsubsets, and subsubsubsets of data. Note that each data block, as with dmidecode data, is separated by a blank line. You know what this means!!! Yes, that's right!!! You can parse inxi output with awk!!, same way legacy bash+gawk inxi used to parse its data!! Or if your brain just does not like lines of data, you can make it appear in indented single key: value pairs. Here you can see for example that 1 Xorg Display has 1 or more Screens, and each Screen has one or more Monitors. Note that this -Ga data first appeared in inxi 3.1.00. Sample [with bug in OpenGL output!, and showing -Ga newer values as well for dual monitor setup, with one Xorg Screen]: inxi -aGy1 Graphics: Device-1: NVIDIA GT218 [GeForce 210] vendor: Gigabyte driver: nouveau v: kernel bus ID: 09:00.0 chip ID: 10de:0a65 Display: x11 server: X.Org 1.20.8 driver: nouveau unloaded: fbdev,modesetting,vesa display ID: :0.0 screens: 1 Screen-1: 0 s-res: 2560x1024 s-dpi: 96 s-size: 677x271mm (26.7x10.7") s-diag: 729mm (28.7") Monitor-1: DVI-I-0 res: 1280x1024 hz: 60 dpi: 96 size: 338x270mm (13.3x10.6") diag: 433mm (17") Monitor-2: VGA-0 res: 1280x1024 hz: 60 dpi: 86 size: 376x301mm (14.8x11.9") diag: 482mm (19") OpenGL: renderer: N/A v: N/A direct render: N/A 2. Refactored and cleaned up print_data(), got rid of some early testing code, dumped some unnecessary tests, simplified old tests, and optimized the new indentation logic reasonably well. Hopefully the print_data() will not be quite as much of a black box now as it was. 3. Even more drive vendors and ID matches!!! The list never ends!! An endless series of new vendors and IDs of existing vendors sprout up, then float away. And inxi follows them to the best of its ability. Thanks again to Linux-Lite hardware database, which help make this ever expanding list possible, since their users appear to use every disk known to humankind. Changes: 1. When out of Display, and Console: shows, -S will not show dm: if no display manager is detected, and if it is detected, it shows DM: since it's not part of the Console: set of data. If out of X and --display is used to get Xorg data out of X, it will show Desktop: set of data as normal, at least it will show the stuff it can find. This resolves the issue where dm: appeared to be a member of the set of Console: data, instead of either its own thing, DM:, or a member of the set of Desktop: data. 2. For RAID Devices with sub Array-x: values, Array-x: is capitalized, it used to be array-x: That was silly. 3. In USB, now Device-x: resets inside each Hub: so that the Device-x: are numbered starting at 1 within each Hub:. This makes the counter behavior act the same as it does in for example RAM Array-x: / Device-y:, where each Array-x: resets Device-y: count to 1. This changes the old default of having Device-x: not reset, to let you see the total number of devices plugged in or attached no matter which hub they were plugged into, but the output actually gets sort of confusing in single key: value pair mode per line. 4. The key: value syntax for weather was changed completely, now it works like the rest of the features, with Report:... [Forecast:...] Locale:... and Source:. Locale makes the source of the times and other date related features, and the location if shown or available, much more obvious. Before it was never clear if Current Time referred to your local or the remote time, now it's clearly from the Locale: you specified with -W, or the default -w local info. Also made Report 1 line if unwrapped, Forecast 1 line if not wrapped, and Locale: 1 line if not wrapped, which makes the output easier to read. NOTE: automated weather queries are NOT allowed, if you do it, you will be banned!! inxi is NOT a desktop weather app!! Don't confuse it with one!! Weather is just a small service to users who might for example want to check the weather on a remote system, or something like that, and is not intended to be used on a routine basis. 5. Cleaned up and re-ordered the --version output. It had some pretty old contexts in the language, which were removed or cleaned up and brought up to date. If you're wondering, I roughly use rsync and nano --version as guides for what to show or not show there.
2020-06-12 07:47:10 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.TP
.B \-\-host\fR
Turns on hostname in System line. Overrides inxi config file value (if set):
\fBSHOW_HOST='false'\fR \- Same as: \fBSHOW_HOST='true'\fR
This is an absolute override, the host will always show no matter what
other switches you use.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-no\-host\fR
Turns off hostname in System line. This is default when using \fB\-z\fR,
for anonymizing inxi output for posting on forums or IRC. Overrides
configuration value (if set):
\fBSHOW_HOST='true'\fR \- Same as: \fBSHOW_HOST='false'\fR
This is an absolute override, the host will not show no matter what other
switches you use.
.TP
.B \-z\fR, \fB\-\-filter\fR
Adds security filters for IP addresses, serial numbers, MAC, location
(\fB\-w\fR), and user home directory name. Removes Host:. On by default for IRC
clients.
.TP
.B \-\-zl\fR, \fB\-\-filter\-label\fR
Filter partition label names from \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, \fB\-P\fR,
and \fB\-Sa\fR (root=LABEL=...). Generally only useful in very specialized
cases.
.TP
.B \-\-zu\fR, \fB\-\-filter\-uuid\fR
Filter partition UUIDs from \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, \fB\-P\fR, and
\fB\-Sa\fR (root=UUID=...). Generally only useful in very specialized cases.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location=<location string> This lets users send an alternate location using either <city,state> or <postal code> or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-\-zv\fR, \fB\-\-filter\-v\fR, \fB\-\-filter\-vulnerabilities\fR
Filter Vulnerabilities report from \fB\-Ca\fR. Generally only useful in very
specialized cases.
.TP
.B \-Z \fR, \fB\-\-filter\-override \fR, \fB\-\-no\-filter\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Absolute override for output filters. Useful for debugging networking
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
issues in IRC for example.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.SH OUTPUT CONTROL OPTIONS
The following options allow for modifying the output in various ways.
.TP
.B \-c \fR, \fB\-\-color\fR \fR[\fB0\fR\-\fB42\fR]
Set color scheme. If no scheme number is supplied, 0 is assumed.
.TP
.B \-c \fR[\fB94\fR\-\fB99\fR]
These color selectors run a color selector option prior to inxi starting
which lets you set the config file value for the selection.
NOTE: All configuration file set color values are removed when output is
piped or redirected. You must use the explicit runtime \fB\-c <color number>\fR
option if you want color codes to be present in the piped/redirected output.
Color selectors for each type display (NOTE: IRC and global only show safe
color set):
.TP
.B \-c 94\fR
\- Console, out of X.
.TP
.B \-c 95\fR
\- Terminal, running in X \- like xTerm.
.TP
.B \-c 96\fR
\- GUI IRC, running in X \- like XChat, Quassel,
Konversation etc.
.TP
.B \-c 97\fR
\- Console IRC running in X \- like irssi in xTerm.
.TP
.B \-c 98\fR
\- Console IRC not in X.
.TP
.B \-c 99\fR
\- Global \- Overrides/removes all settings.
Setting a specific color type removes the global color selection.
.TP
.B \-\-indent [11\-xx]\fR
Change primary wide indent width. Generally useless. Only applied if output
width is greater than max wrap width (see \fB\-\-max\-wrap\fR). Use
configuration item \fBINDENT\fR to make permanent.
.TP
.B \-\-indents [0\-10]\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Change primary wrap mode, second, and \fB\-y1\fR level indents. First indent
level only applied if output width is less than max wrap width (see
\fB\-\-max\-wrap\fR). 0 disables all wrapped indents and all second level
indents. Use configuration item \fBINDENTS\fR to make permanent.
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.TP
.B \-\-limit [\-1 \- x]\fR
Raise or lower max output limit of IP addresses for \fB\-i\fR. \fB\-1\fR
removes limit.
.TP
.B \-\-max\-wrap\fR, \fB\-\-wrap\-max [integer]\fR
Overrides default or configuration set line starter wrap width value. Wrap max
is the maximum width that inxi will wrap line starters (e.g. \fBInfo:\fR) to
their own lines, with data lines indented default 2 columns (use
\fB\-\-indents\fR to change).
If terminal/console width or \fB\-\-width\fR is less than wrap width, wrapping
of line starter occurs. If \fB80\fR or less, no wrapping will occur. Overrides
internal default value (110) and user configuration value \fBMAX_WRAP\fR.
.TP
.B \-\-output [json|screen|xml]\fR
Change data output type. Requires \-\-output\-file if not \fBscreen\fR.
.TP
.B \-\-output\-file [full path to output file|print]\fR
The given directory path must exist. The directory path given must exist,
The \fBprint\fR options prints to stdout.
Required for non\-screen \fB\-\-output\fR formats (json|xml).
.TP
.B \-\-partition\-sort [dev\-base|fs|id|label|percent\-used|size|uuid|used]\fR
Change default sort order of partition output. Corresponds to
\fBPARTITION_SORT\fR configuration item. These are the available sort options:
\fBdev\-base\fR - \fB/dev\fR partition identifier, like \fB/dev/sda1\fR.
Note that it's an alphabetic sort, so \fBsda12\fR is before \fBsda2\fR.
\fBfs\fR \- Partition filesystem. Note that sorts will be somewhat random if
all filesystems are the same.
\fBid\fR \- Mount point of partition (default).
\fBlabel\fR \- Label of partition. If partitions have no labels,
sort will be random.
\fBpercent\-used\fR - Percentage of partition size used.
\fBsize\fR \- KiB size of partition.
\fBuuid\fR \- UUID of the partition.
\fBused\fR \- KiB used of partition.
.TP
.B \-\-wrap\-max [integer]\fR
.br
See \fB\-\-max-wrap\fR.
.TP
.B \-y\fR, \fB\-\-width [integer]\fR
This is an absolute width override which sets the output line width max.
Overrides \fBCOLS_MAX_IRC\fR, \fBCOLS_MAX_NO_DISPLAY\fR, \fBCOLS_MAX_CONSOLE\fR
configuration items, or the actual widths of the terminal.
* \fB\-y\fR \- sets default width of 80 columns.
.br
* \fB\-y [80-xxx]\fR \- sets width to given number. Must be 80 or more.
.br
* \fB\-y 1\fR \- switches to a single indented key/value pair per line, and
removes all long line wrapping (similar to \fBdmidecode\fR output). Not
recommended for use with \fB\-Y\fR;
.br
* \fB\-y \-1\fR \- removes width limits (if assigned by configuration items).
Examples:
.br
\fBinxi \-Fxx \-y 130\fR
.br
\fBinxi \-Fxxy\fR
.br
\fBinxi \-bay1\fR
.TP
.B \-Y\fR, \fB\-\-height\fR, \fB\-\-less [\-3\-[integer]\fR
Control output height. Useful when in console, and scrollback not available.
Breaks output flow based on values provided.
* \fB\-Y 0\fR or \fB\-Y\fR \- Set default max height to terminal height.
.br
* \fB\-Y [1\-xxx]\fR \- set max output block height height in lines.
.br
* \fB\-Y \-1\fR \- Print out one primary data item block (like \fBCPU:\fR,
\fBSystem:\fR) at a time. Useful for very long outputs like \fB\-Fa\fR,
\fB\-v8\fR, etc. Not available for \fB\-h\fR.
.br
* \fB\-Y \-2\fR \- Do not disable output colors when redirected or piped to
another program. Useful if piping output to \fBless \-R\fR for example. This
does not limit the height otherwise since the expectation it is being piped to
another program like \fBless\fR which will handle that.
.br
* \fB\-Y \-3\fR \- Restore default unlimited output lines if \fBLINES_MAX\fR
configuration item set.
Recommended to use the following for very clean up and down scrollable output
out of display, while retaining the color schemes, which are normally removed
with piping or redirect:
\fBpinxi \-v8Y \-2 | less \-R\fR
Note: since it's not possible for inxi to know how many actual terminal lines
are being used by terminal wrapped output, with \fB\-y 1\fR , it may be better
in general to use a fixed height like:
\fB\-y 1 \-Y 20\fR instead of: \fB\-y 1 \-Y\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH EXTRA DATA OPTIONS
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
These options can be triggered by one or more \fB\-x\fR.
Alternatively, the \fB\-v\fR options trigger them in the following
way: \fB\-v 3\fR adds \fB\-x\fR;
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fB\-v 6\fR adds \fB\-xx\fR; \fB\-v 7\fR adds \fB\-xxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
These extra data triggers can be useful for getting more in\-depth
data on various options. They can be added to any long form option list,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
e.g.: \fB\-bxx\fR or \fB\-Sxxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
There are 3 extra data levels:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.br
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.br
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
OR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.br
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fB\-\-extra 1\fR, \fB\-\-extra 2\fR, \fB\-\-extra 3\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The following details show which lines / items display extra information for
each extra data level.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
tweaked man page new tar.gz
2012-10-19 19:43:26 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-A\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows specific
vendor [product] information.
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds version/port(s)/driver version (if available) for each device.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds PCI/USB ID of each device.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds non-running sound servers, if detected.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-B\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds vendor/model, battery status (if battery present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds attached battery powered peripherals (\fBDevice\-[number]:\fR) if
detected (keyboard, mouse, etc.).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds battery \fBvolts:\fR, \fBmin:\fR voltages. Note that if difference is
critical, that is current voltage is too close to minimum voltage, shows without
\fB\-x\fR.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
.B \-x \-C\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds bogomips to CPU speed report (if available).
\- Adds \fBL1:\fR and \fBL3:\fR cache types if either are present/available. For
BSD or legacy Linux, uses dmidecode + doas/sudo/root. Force use of dmidecode
cache values by adding \fB\-\-dmidecode\fR. This will override /sys based cache
data, which tends to be better, so in general don't do that.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds \fBboost: [enabled|disabled]\fR if detected, aka \fBturbo\fR. Not all
CPUs have this feature.
Bug fixes, feature updates, changes!! Bugs: 1. There was a glitch in the pattern that made -D samsung / seagate not ID right, fixed. 2. I do not like calling this a bug, because it's not an inxi bug, it's an upstream regression in the syntax used in /proc/version, they changed a fully predictable gcc version .... to a random series of embedded/nested parentheses and other random junk. inxi tries to deal with this regression, which will be perceived as a bug in systems running kernel 5.8 or newer and inxi 3.1.06 or older, since it will fail to show the kernel build compiler version since it can't find it in the string. I really dislike these types of regressions caused by bad ideas done badly and without any thought to the transmitted knowledge base, but that's how it goes, no discipline, I miss the graybeards, who cared about things like this. Fixes: 1. more -D nvme id changes, intel in this case. 2. FreeBSD lsusb changed syntax, which triggered a series of errors when run. Since I never really got the required data [hint bsd users, do NOT file issues that you want fixed and then not provide all the data required, otherwise, really, why did you file the issue? did you expect magic pixies to fly in with the required data?] See the README.txt for what to do to get issues really handed in BSDs. tldr; version: if you won't spend the time providing data and access required, I won't spend the time on the issue, period, since if you don't care enough to do those simple steps, why on earth do you expect me to? Changes: 1. -C 'boost' option changed from -xxx feature to -x feature. Consider it a promotion! 2. Added --dbg 19 switch to enable smart data debugging for -Da. 3. Some new tools to handle impossible data values for some -D situations for SMART where the smart report contains gibberish values, that was issue #225 -- tools were convert_hex and is_Hex. The utility for these is limited, but might be of use in some cases, like handling the above gibberish data value.
2020-09-29 23:22:15 +00:00
New version, new man page. Bugs: 1. Both a fix and a bug, in that inxi had an out of date list of Xorg drivers. This led to all the newer Intel devices failing to show their drivers in the Xorg driver lines, like i915, i965, and so on. Updated to full current list of Xorg drivers. This is not technically a bug since it's simply things that came into existence after that logic was last updated. But it looks like a bug. Fixes: 1. Issues #170 and #168 showed a problem with inxi believing it was running in IRC when Ansible or MOTD started inxi. This is because they are not tty so trip the non tty flag, which assumes it's in IRC in that case. The fix was to add a whitelist of known clients based on the parent name inxi discovers while running inside that parent. MOTD confirmed fixed, Ansible not confirmed. Why do people file issue reports then not follow them? Who knows. Note that this issue is easy to trip by simply doing this: echo 'fred' | inxi which disables the tty test as well. To handle that scenario, that is, when inxi is not first in the pipe, I added many known terminal client names to the whitelists. This works in my tests, though the possible terminals, or programs with embedded terminals, is quite large, but inxi handles most of them automatically. When it doesn't, file an issue and I'll add your client ID to the whitelist, and use --tty in the meantime. 2. Issue #171 by Vascom finally pinned down the wide character issue which manifests in some character sets, like greek or russian utf8. The fix was more of a work-around than a true fix, but inxi now simply checks the weather local time output for wide characters, and if detected, switches the local date/time format to iso standard, which is does not contain non ascii characters as far as I can tell. This seemed to fix the issue. 3. Added iso9660 from excluded file systems for partitions, not sure how inxi missed that one for so long. 4. See bug 1, expanded and made current supported intel drivers, and a few other drivers, so now inxi has all the supported xorg drivers again. Updated docs as well to indicate where to get that data. Enhancements: 1. As usual, more disk vendor/product ID matches, thanks to linuxlite hardware database, which never stops providing new or previously unseen disk ids. Latest favorite? Swissarmy knife maker victorinox Swissflash usb device. 2. Added Elive system base ID. 3. Added Nutyx CARDS repo type.
2019-01-01 05:11:01 +00:00
\- Adds CPU Flags (short list). Use \fB\-f\fR to see full flag/feature list.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds CPU microarchitecture + revision (e.g. Sandy Bridge, K8, ARMv8, P6,
etc.). Only shows data if detected. Newer microarchitectures will have to be
added as they appear, and require the CPU family ID, model ID, and stepping.
\- Adds, if smt (Simultaneous MultiThreading) is available but disabled, after
\fBtype:\fR data \fBsmt: disabled\fR. \fBtype: MT\fR means it's enabled. See
\fB\-Cxxx\fR.
New version, tarball, man page. More cpu arch fixes, and added stepping/release info as well so you can see which revision of the cpu microarchitecture your cpu has. Also fixed a few random vm id issues, I found cases where systemd believes it's bochs but it is actually kvm, so now the systemd data is not fully trusted, but is confirmed.
2017-07-29 01:42:17 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Examples:
.br
\fBarch: Sandy Bridge rev: 2\fR
.br
\fBarch: K8 rev.F+ rev: 2\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
If unable to non\-ambiguosly determine architecture, will show something like:
\fBarch: Amber Lake note: check rev: 9\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds CPU highest speed after \fBavg: [speed] high: [speed]\fR if greater than
1 core and cores have different speeds. Linux only.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-d\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds more items to \fBFeatures\fR line of optical drive;
dds rev version to optical drive.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-D\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\- Adds HDD temperature with disk data.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Method 1: Systems running Linux kernels ~5.6 and newer should have
\fBdrivetemp\fR module data available. If so, drive temps will come from
/sys data for each drive, and will not require root or hddtemp. This method
is MUCH faster than using hddtemp. Note that NVMe drives do not require
\fBdrivetemp\fR.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
Bug fixes!! Fixes!!! Refactors!!! Edits!!! Bugs: 1. Big bug, 3.2 appears to have introduced this bug, for disks, rotation and partition scheme would never show, oops. 2. Tiny bug kept one specific smart value from ever showing, typo. Fixes: 1. Accidentally followed Arch linux derived distro page, which claims KaOS as arch derived, when of course it's not, it's its own distro, own toolchain, etc. I kind of knew this but had forgotten, then I believed the Arch derived distro page, oh well. Resulted in KaOS being listed with arch linux as system base with -Sx. Arch should fix this, it's not like it's hard, just remove the distro from the page. 2. Cleared up explanations for drivetemp vs hddtemp use, updated --recommends, man, and help to hopefully make this clear. Debian will be dropping hddtemp, which is not maintained, sometime in the coming years, sooner than later. Note that users unfortunately have to manually enable drivetemp module unless their distros enable it by default, but the man/recommands/help explain that. 3. Fixed smart indentation issues, that went along with code change 1, was failing to indent one further level for failed/age values like it's supposed to. Enhancements: 1. Added /proc/device to debugger, that will help track block device main numbers 2. More disk vendors, more disk vendor IDs!!! As noted, the enternal flow flows eternally, thanks linux-lite hardware database users!! and other inxi users, whose outputs sometimes reveal a failure or two. 3. Added loaded kernel module tests to --recommends, this was mostly to let users know that drivetemp is needed if you want non superuser fast drive temps, and that this came along with kernels 5.6 or newer. Hopefully word will start drifting out. Note that if inxi is using drivetemp values, drive temps will appear as regular user with -Dx, and will be to 1 decimal place. hddtemp temps are integers, and requires sudo to display the temps. 4. To handle issue #239 which I'd thought of trying off and on, but never did, added option to -Dxxx to show SSD if a positive SSD ID was made to rotation: So rotation will show either nothing, if no rotation or ssd data is detected, the disk speed in rpm, or SSD if an SSD device. There may be corner cases where this is wrong, but I don't have data for that, for example, if a disk is parked and has zero rotation but is a HDD, not as SSD. I don't know what the data looksl ike in that case. Note that if sudo inxi -Da is used, and smartctl is installed, it should be right almost all the time, and with regular -Dxxx, it's going to be right almost always, with a few corner cases. That slight uncertainty is why I never implemented this before. Legacy drives also sometimes did not report rotation speeds even when HDD, so those may create issues, but inxi will only call it an SSD if it's an nvme, mmcblk device, both are easy to ID as SSD, or if it meets certain conditions. It will not call a drive an SSD if it was unable to meet those conditions. INTERNAL CODE CHANGES: 1. Refactored the output logic for DiskData, that was messy, split it into a few subs, and also refactored the way smartctl data was loaded and used, that's much cleaner and easier to use now. Split the previous 1 big sub into: totals_output(), drives_output(), and smart_output(). Also split out the smart field arrays into a separate sub, which loads references to avoid creating new arrays and copying them all over when outputting smart data. References are weird to work with directly but they are MUCH faster to use, so I'm moving as much of the internal logic to use array raferences instead of dereferenced arrays/hashes assigned to a new array, or hash. 2. Redid all the output modules and renamed them to be more consistent and predictable, and redid the logic here and there to make the get() items be fairly similar on all the data builder packages. Now as with the data subs, which generally end in _data, now most of the output subs end with _output. 3. Roughly finished the process started in 3.2, got rid of redundant array loads, changed: @something = something_data(); push (@rows,@something); to: push (@rows,something_data()); which avoids creating an extra array, this also let me remove many arrays overall. 4. Missed a few hashes in machine data that were being passed directly, not as references, to other subs, corrected that. I think I missed those because they were %, so the search I did for @ in sub arg lists didn't catch the % hashes.
2021-02-09 01:07:34 +00:00
If your \fBdrivetemp\fR module is not enabled, enable it:
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Bug fixes!! Fixes!!! Refactors!!! Edits!!! Bugs: 1. Big bug, 3.2 appears to have introduced this bug, for disks, rotation and partition scheme would never show, oops. 2. Tiny bug kept one specific smart value from ever showing, typo. Fixes: 1. Accidentally followed Arch linux derived distro page, which claims KaOS as arch derived, when of course it's not, it's its own distro, own toolchain, etc. I kind of knew this but had forgotten, then I believed the Arch derived distro page, oh well. Resulted in KaOS being listed with arch linux as system base with -Sx. Arch should fix this, it's not like it's hard, just remove the distro from the page. 2. Cleared up explanations for drivetemp vs hddtemp use, updated --recommends, man, and help to hopefully make this clear. Debian will be dropping hddtemp, which is not maintained, sometime in the coming years, sooner than later. Note that users unfortunately have to manually enable drivetemp module unless their distros enable it by default, but the man/recommands/help explain that. 3. Fixed smart indentation issues, that went along with code change 1, was failing to indent one further level for failed/age values like it's supposed to. Enhancements: 1. Added /proc/device to debugger, that will help track block device main numbers 2. More disk vendors, more disk vendor IDs!!! As noted, the enternal flow flows eternally, thanks linux-lite hardware database users!! and other inxi users, whose outputs sometimes reveal a failure or two. 3. Added loaded kernel module tests to --recommends, this was mostly to let users know that drivetemp is needed if you want non superuser fast drive temps, and that this came along with kernels 5.6 or newer. Hopefully word will start drifting out. Note that if inxi is using drivetemp values, drive temps will appear as regular user with -Dx, and will be to 1 decimal place. hddtemp temps are integers, and requires sudo to display the temps. 4. To handle issue #239 which I'd thought of trying off and on, but never did, added option to -Dxxx to show SSD if a positive SSD ID was made to rotation: So rotation will show either nothing, if no rotation or ssd data is detected, the disk speed in rpm, or SSD if an SSD device. There may be corner cases where this is wrong, but I don't have data for that, for example, if a disk is parked and has zero rotation but is a HDD, not as SSD. I don't know what the data looksl ike in that case. Note that if sudo inxi -Da is used, and smartctl is installed, it should be right almost all the time, and with regular -Dxxx, it's going to be right almost always, with a few corner cases. That slight uncertainty is why I never implemented this before. Legacy drives also sometimes did not report rotation speeds even when HDD, so those may create issues, but inxi will only call it an SSD if it's an nvme, mmcblk device, both are easy to ID as SSD, or if it meets certain conditions. It will not call a drive an SSD if it was unable to meet those conditions. INTERNAL CODE CHANGES: 1. Refactored the output logic for DiskData, that was messy, split it into a few subs, and also refactored the way smartctl data was loaded and used, that's much cleaner and easier to use now. Split the previous 1 big sub into: totals_output(), drives_output(), and smart_output(). Also split out the smart field arrays into a separate sub, which loads references to avoid creating new arrays and copying them all over when outputting smart data. References are weird to work with directly but they are MUCH faster to use, so I'm moving as much of the internal logic to use array raferences instead of dereferenced arrays/hashes assigned to a new array, or hash. 2. Redid all the output modules and renamed them to be more consistent and predictable, and redid the logic here and there to make the get() items be fairly similar on all the data builder packages. Now as with the data subs, which generally end in _data, now most of the output subs end with _output. 3. Roughly finished the process started in 3.2, got rid of redundant array loads, changed: @something = something_data(); push (@rows,@something); to: push (@rows,something_data()); which avoids creating an extra array, this also let me remove many arrays overall. 4. Missed a few hashes in machine data that were being passed directly, not as references, to other subs, corrected that. I think I missed those because they were %, so the search I did for @ in sub arg lists didn't catch the % hashes.
2021-02-09 01:07:34 +00:00
\fBmodprobe drivetemp\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Bug fixes!! Fixes!!! Refactors!!! Edits!!! Bugs: 1. Big bug, 3.2 appears to have introduced this bug, for disks, rotation and partition scheme would never show, oops. 2. Tiny bug kept one specific smart value from ever showing, typo. Fixes: 1. Accidentally followed Arch linux derived distro page, which claims KaOS as arch derived, when of course it's not, it's its own distro, own toolchain, etc. I kind of knew this but had forgotten, then I believed the Arch derived distro page, oh well. Resulted in KaOS being listed with arch linux as system base with -Sx. Arch should fix this, it's not like it's hard, just remove the distro from the page. 2. Cleared up explanations for drivetemp vs hddtemp use, updated --recommends, man, and help to hopefully make this clear. Debian will be dropping hddtemp, which is not maintained, sometime in the coming years, sooner than later. Note that users unfortunately have to manually enable drivetemp module unless their distros enable it by default, but the man/recommands/help explain that. 3. Fixed smart indentation issues, that went along with code change 1, was failing to indent one further level for failed/age values like it's supposed to. Enhancements: 1. Added /proc/device to debugger, that will help track block device main numbers 2. More disk vendors, more disk vendor IDs!!! As noted, the enternal flow flows eternally, thanks linux-lite hardware database users!! and other inxi users, whose outputs sometimes reveal a failure or two. 3. Added loaded kernel module tests to --recommends, this was mostly to let users know that drivetemp is needed if you want non superuser fast drive temps, and that this came along with kernels 5.6 or newer. Hopefully word will start drifting out. Note that if inxi is using drivetemp values, drive temps will appear as regular user with -Dx, and will be to 1 decimal place. hddtemp temps are integers, and requires sudo to display the temps. 4. To handle issue #239 which I'd thought of trying off and on, but never did, added option to -Dxxx to show SSD if a positive SSD ID was made to rotation: So rotation will show either nothing, if no rotation or ssd data is detected, the disk speed in rpm, or SSD if an SSD device. There may be corner cases where this is wrong, but I don't have data for that, for example, if a disk is parked and has zero rotation but is a HDD, not as SSD. I don't know what the data looksl ike in that case. Note that if sudo inxi -Da is used, and smartctl is installed, it should be right almost all the time, and with regular -Dxxx, it's going to be right almost always, with a few corner cases. That slight uncertainty is why I never implemented this before. Legacy drives also sometimes did not report rotation speeds even when HDD, so those may create issues, but inxi will only call it an SSD if it's an nvme, mmcblk device, both are easy to ID as SSD, or if it meets certain conditions. It will not call a drive an SSD if it was unable to meet those conditions. INTERNAL CODE CHANGES: 1. Refactored the output logic for DiskData, that was messy, split it into a few subs, and also refactored the way smartctl data was loaded and used, that's much cleaner and easier to use now. Split the previous 1 big sub into: totals_output(), drives_output(), and smart_output(). Also split out the smart field arrays into a separate sub, which loads references to avoid creating new arrays and copying them all over when outputting smart data. References are weird to work with directly but they are MUCH faster to use, so I'm moving as much of the internal logic to use array raferences instead of dereferenced arrays/hashes assigned to a new array, or hash. 2. Redid all the output modules and renamed them to be more consistent and predictable, and redid the logic here and there to make the get() items be fairly similar on all the data builder packages. Now as with the data subs, which generally end in _data, now most of the output subs end with _output. 3. Roughly finished the process started in 3.2, got rid of redundant array loads, changed: @something = something_data(); push (@rows,@something); to: push (@rows,something_data()); which avoids creating an extra array, this also let me remove many arrays overall. 4. Missed a few hashes in machine data that were being passed directly, not as references, to other subs, corrected that. I think I missed those because they were %, so the search I did for @ in sub arg lists didn't catch the % hashes.
2021-02-09 01:07:34 +00:00
Once enabled, add \fBdrivetemp\fR to \fB/etc/modules\fR or
\fB/etc/modules\-load.d/***.conf\fR so it starts automatically.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
If you see drive temps running as regular user and you did not configure system
to use doas/sudo hddtemp, then your system supports this feature. If no /sys
data is found, inxi will try to use hddtemp methods instead for that drive.
Hint: if temp is /sys sourced, the temp will be to 1 decimal, like 34.8, if
hddtemp sourced, they will be integers.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Bug fixes!! Fixes!!! Refactors!!! Edits!!! Bugs: 1. Big bug, 3.2 appears to have introduced this bug, for disks, rotation and partition scheme would never show, oops. 2. Tiny bug kept one specific smart value from ever showing, typo. Fixes: 1. Accidentally followed Arch linux derived distro page, which claims KaOS as arch derived, when of course it's not, it's its own distro, own toolchain, etc. I kind of knew this but had forgotten, then I believed the Arch derived distro page, oh well. Resulted in KaOS being listed with arch linux as system base with -Sx. Arch should fix this, it's not like it's hard, just remove the distro from the page. 2. Cleared up explanations for drivetemp vs hddtemp use, updated --recommends, man, and help to hopefully make this clear. Debian will be dropping hddtemp, which is not maintained, sometime in the coming years, sooner than later. Note that users unfortunately have to manually enable drivetemp module unless their distros enable it by default, but the man/recommands/help explain that. 3. Fixed smart indentation issues, that went along with code change 1, was failing to indent one further level for failed/age values like it's supposed to. Enhancements: 1. Added /proc/device to debugger, that will help track block device main numbers 2. More disk vendors, more disk vendor IDs!!! As noted, the enternal flow flows eternally, thanks linux-lite hardware database users!! and other inxi users, whose outputs sometimes reveal a failure or two. 3. Added loaded kernel module tests to --recommends, this was mostly to let users know that drivetemp is needed if you want non superuser fast drive temps, and that this came along with kernels 5.6 or newer. Hopefully word will start drifting out. Note that if inxi is using drivetemp values, drive temps will appear as regular user with -Dx, and will be to 1 decimal place. hddtemp temps are integers, and requires sudo to display the temps. 4. To handle issue #239 which I'd thought of trying off and on, but never did, added option to -Dxxx to show SSD if a positive SSD ID was made to rotation: So rotation will show either nothing, if no rotation or ssd data is detected, the disk speed in rpm, or SSD if an SSD device. There may be corner cases where this is wrong, but I don't have data for that, for example, if a disk is parked and has zero rotation but is a HDD, not as SSD. I don't know what the data looksl ike in that case. Note that if sudo inxi -Da is used, and smartctl is installed, it should be right almost all the time, and with regular -Dxxx, it's going to be right almost always, with a few corner cases. That slight uncertainty is why I never implemented this before. Legacy drives also sometimes did not report rotation speeds even when HDD, so those may create issues, but inxi will only call it an SSD if it's an nvme, mmcblk device, both are easy to ID as SSD, or if it meets certain conditions. It will not call a drive an SSD if it was unable to meet those conditions. INTERNAL CODE CHANGES: 1. Refactored the output logic for DiskData, that was messy, split it into a few subs, and also refactored the way smartctl data was loaded and used, that's much cleaner and easier to use now. Split the previous 1 big sub into: totals_output(), drives_output(), and smart_output(). Also split out the smart field arrays into a separate sub, which loads references to avoid creating new arrays and copying them all over when outputting smart data. References are weird to work with directly but they are MUCH faster to use, so I'm moving as much of the internal logic to use array raferences instead of dereferenced arrays/hashes assigned to a new array, or hash. 2. Redid all the output modules and renamed them to be more consistent and predictable, and redid the logic here and there to make the get() items be fairly similar on all the data builder packages. Now as with the data subs, which generally end in _data, now most of the output subs end with _output. 3. Roughly finished the process started in 3.2, got rid of redundant array loads, changed: @something = something_data(); push (@rows,@something); to: push (@rows,something_data()); which avoids creating an extra array, this also let me remove many arrays overall. 4. Missed a few hashes in machine data that were being passed directly, not as references, to other subs, corrected that. I think I missed those because they were %, so the search I did for @ in sub arg lists didn't catch the % hashes.
2021-02-09 01:07:34 +00:00
Method 2: if you have hddtemp installed, if you are root
or if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
.B <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
doas users: see \fBman doas.conf\fR for setup.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
You can force use of \fBhddtemp\fR for all drives using \fB\-\-hddtemp\fR.
\- If free LVM volume group size detected (root required), show \fBlvm-free:\fR
on Local Storage line. This is how much unused space the VGs contain, that is,
space not assigned to LVs.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-x \-E\fR (\fB\-\-bluetooth\fR)
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows
specific vendor [product] information.
\- Adds PCI/USB Bus ID of each device.
\- Adds driver version (if available) for each device.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds (if available, and \fBhciconfig\fR only) LMP (HCI if no LMP data,
and HCI if HCI/LMP versions are different) version (if available)
for each HCI ID.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-G\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCI/USB ID of each device.
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows
specific vendor [product] information.
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBX.org:\fR Adds direct rendering status.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBX.org:\fR Adds (for single GPU, nvidia driver) screen number that GPU is
running on.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
tweaked man page new tar.gz
2012-10-19 19:43:26 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-i\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds IP v6 additional scope data, like Global, Site, Temporary for
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
each interface.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Note that there is no way we are aware of to filter out the deprecated
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
IP v6 scope site/global temporary addresses from the output of
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\fBifconfig\fR. The \fBip\fR tool shows that clearly.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-temporary\fR \- (\fBip\fR tool only), scope global temporary.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Scope global temporary deprecated is not shown
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-global\fR \- scope global (\fBifconfig\fR will show this for
all types, global, global temporary, and global temporary deprecated,
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fBip\fR shows it only for global)
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-link\fR \- scope link (\fBip\fR/\fBifconfig\fR) \- default
for \fB\-i\fR.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-site\fR \- scope site (\fBip\fR/\fBifconfig\fR). This has been
deprecated in IPv6, but still exists. \fBifconfig\fR may show multiple site
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
values, as with global temporary, and global temporary deprecated.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\fBip\-v6\-unknown\fR \- unknown scope
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-I\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds current init system (and init rc in some cases, like OpenRC).
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
With \fB\-xx\fR, shows init/rc version number, if available.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds default system gcc. With \fB\-xx\fR, also show other installed gcc
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
versions.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds current runlevel (not available with all init systems).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
\- Adds total packages discovered in system. See \fB\-xx\fR and \fB\-a\fR
for per package manager types output. Moves to \fBRepos\fR if \fB\-rx\fR.
If your package manager is not supported, please file an issue and we'll add it.
That requires the full output of the query or method to discover all installed
packages on your system, as well of course as the command or method used to
discover those.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- If in shell (i.e. not in IRC client), adds shell version number, if
available.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-x \-j\fR, \fB\-x \-\-swap\fR
Add \fBmapper:\fR. See \fB\-x \-o\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-x \-J\fR (\fB\-\-usb\fR)
\- For Devices, adds driver(s).
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-x \-L\fR, \fB\-x \-\-logical\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds \fBdm: dm-x\fR to VG > LV and other Device types. This can help
tracking down which device belongs to what.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
.B \-x \-m\fR, \fB\-\-memory\-modules\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- If present, adds maximum memory module/device size in the Array line.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Only some systems will have this data available. Shows estimate if it can
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
generate one.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device type in the Device line.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-N\fR
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows
specific vendor [product] information.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds version/port(s)/driver version (if available) for each device;
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds PCI/USB ID of each device.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-x \-o\fR, \fB\-x \-p\fR, \fB\-x \-P\fR
redid patches, I think
2021-08-25 03:39:33 +00:00
\- Adds \fBmapper:\fR (the \fB/dev/mapper/\fR partition ID)
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
if mapped partition.
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
Example: \fBID\-4: /home ... dev: /dev/dm-6 mapped: ar0-home\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.TP
.B \-x \-r\fR
\- Adds Package info. See \fB\-Ix\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-R\fR
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
\- md\-raid: Adds second RAID Info line with extra data: blocks, chunk size,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
bitmap (if present). Resync line, shows blocks synced/total blocks.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Hardware RAID: Adds driver version, Bus ID.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location=<location string> This lets users send an alternate location using either <city,state> or <postal code> or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
.TP
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
.B \-x \-s\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds basic voltages: 12v, 5v, 3.3v, vbat (\fBipmi\fR, \fBlm-sensors\fR if
present).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-S\fR
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
\- Adds Kernel gcc version.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds to \fBDistro:\fR \fBbase:\fR if detected. System base will only be
seen on a subset of distributions. The distro must be both derived from a
parent distro (e.g. Mint from Ubuntu), and explicitly added to the supported
distributions for this feature. Due to the complexity of distribution
identification, these will only be added as relatively solid methods are
found for each distribution system base detection.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
.TP
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.B \-x \-t\fR (\fB\-\-processes\fR)
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds memory use output to CPU (\fB\-xt c\fR), and CPU use to memory
(\fB\-xt m\fR).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-x \-w \fR, \fB\-W\fR
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
\- Adds humidity and barometric pressure.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds wind speed and direction.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-A\fR
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds vendor:product ID for each device.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe speed and lanes item (Linux only, if detected).
Actual new version, support for -xx option for A, G, and N, outputs vendor:product string if found. Updated --help, updated inxi.1.gz man file, updated inxi.tar.gz file. I think that's it unless there's a bug fix.
2012-10-19 19:28:31 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-B\fR
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds serial number.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man page. Bug fix, enhancements, fixes. Bugs: 1. Big bug found on certain systems, they use non system memory memory arrays, inxi failed to anticipate that situation, and would exit with error when run as root for -m when it hit those array types. These arrays did not have modules listed, so the module array was undefined, which caused the failure. Thanks Manjaro anonymous debugger dataset 'loki' for finding this failure. This is literally the first dataset I've seen that had this issue, but who knows how many other system boards will show something like that as well. Fixes: 1. Related to bug 1, do not show the max module size item if not system memory and size is less than 10 MiB. Assuming there that it's one of these odd boards. Enhancements: 1. For bug 1, extended Memory: report to include array type if not system memory. That instance had Video Memory, Flash Memory, and Cache Memory arrays along with the regular System Memory array. Now shows: use: Video Memory for example if not System Memory to make it clear what is going on. 2. Added basic Parrot system base, but for some inexplicable reason, Parrot changed the /etc/debian_version file to show 'stable' instead of the release number. Why? Who knows, it would be so much easier if people making these derived distros would be consistent and not change things for no good reason. 3. Added a few more pattern matches to existing vendors for disks. As usual, thanks linuxlite/linux hardware database for the endless lists of disk data. 4. Added internal dmidecode debugger switches, that makes it much easier to inject test dmidecode data from text files using debugger switches internally. 5. Added -Cxx item, which will run if root and -C are used, now grabs L1 and L3 cache data from dmidecode and shows it. I didn't realize that data was there, not sure how I'd missed it all these years, I guess pinxi really is much easier to work on! This only runs if user has dmidecode permissions from root or sudo.
2018-09-10 22:13:52 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-D\fR
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Adds disk serial number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new tarball. This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
2018-05-21 21:45:09 +00:00
\- Adds disk speed (if available). This is the theoretical top speed of the
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
device as reported. This speed may be restricted by system board limits,
eg. a SATA 3 drive on a SATA 2 board may report SATA 2 speeds, but this is
not completely consistent, sometimes a SATA 3 device on a SATA 2 board reports
New version, new tarball. This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
2018-05-21 21:45:09 +00:00
its design speed.
NVMe drives: adds lanes, and (per direction) speed is calculated with
lane speed * lanes * PCIe overhead. PCIe 1 and 2 have data rates of
redid patches, I think
2021-08-25 03:39:33 +00:00
GT/s * .8 = Gb/s (10 bits required to transfer 8 bits of data).
New version, new tarball. This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
2018-05-21 21:45:09 +00:00
PCIe 3 and greater transfer data at a rate of GT/s * 128/130 * lanes = Gb/s
(130 bits required to transfer 128 bits of data).
For a PCIe 3 NVMe drive, with speed of \fB8 GT/s\fR and \fB4\fR lanes
(\fB8GT/s * 128/130 * 4 = 31.6 Gb/s\fR):
\fBspeed: 31.6 Gb/s lanes: 4\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds disk duid, if available. Some BSDs have it.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-xx \-E\fR (\fB\-\-bluetooth\fR)
\- Adds vendor:product ID of each device.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds (\fBhciconfig \fRonly) LMP subversion (and/or HCI revision
if applicable) for each device.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe speed and lanes item (Linux only, and if PCIe bluetooth, which is
rare).
New version, new tarball. This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
2018-05-21 21:45:09 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-G\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Triggers much more complete Screen/Monitor output.
\fBX.org:\fR requires \fBxdpyinfo\fR or \fBxrandr\fR, and the advanced per
monitor feature requires \fBxrandr\fR.
\fBWayland:\fR requires any tool capable of showing monitor and resolution
information. \fBSway\fR has \fBswaymsg\fR, \fBweston\-info\fR or
\fBwayland\-info\fR can show Wayland information on any Wayland compositor, and
\fBwlr\-randr\fR can show Wayland information for any \fBwlroots\fR based
compositor.
Further note that all references to \fBDisplays\fR, \fBScreens\fR, and
\fBMonitors\fR are referring to the \fBX\fR or \fBWayland\fR technical terms,
not normal consumer usage.
\fBX.org:\fR 1 \fBDisplay\fR runs 1 or more \fBScreens\fR, and 1 \fBScreen\fR
runs 1 or more \fBMonitors\fR.
\fBWayland:\fR The \fBDisplay\fR is the primary container, and it can contain 1
or more \fBMonitors\fR.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds vendor:product ID of each device.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe speed and lanes item (Linux only, and if PCIe device and detected).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds output port IDs, active, off (connected but disabled, like a closed
laptop lid) and empty. Example:
man page fix, forgot to put one advanced option per item for -G
2017-06-09 19:39:43 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fBports: active: DVI\-I\-1,VGA\-1 empty: HDMI\-A\-1\fR
\- Adds \fBDisplay\fR ID. X.org: the Display running the Screen that runs the
Monitors; Wayland: the Display that runs the monitors.
\- Adds compositor, if found (always shows for Wayland).
\- \fBWayland:\fR Adds to \fBDisplay\fR \fBd-rect:\fR if > 1 monitors in
Display. This is the size of the rectangle Wayland creates to situate the
monitors in.
\- \fBX.org:\fR If available, shows \fBalternate:\fR Xorg drivers. This means a
driver on the default list of drivers Xorg automatically checks for the device,
but which is not installed. For example, if you have \fBnouveau\fR driver,
\fBnvidia\fR would show as alternate if it was not installed. Note that
\fBalternate:\fR does NOT mean you should have it, it's just one of the drivers
Xorg checks to see if is present and loaded when checking the device. This can
let you know there are other driver options. Note that if you have explicitly
set the driver in \fBxorg.conf\fR, Xorg will not create this automatic check
driver list.
\- \fBXorg:\fR Adds total number of \fBScreens\fR listed for the current
\fBDisplay\fR.
\- \fBXorg:\fR Adds default \fBScreen\fR ID if Screen (not monitor!) total is
greater than 1.
\- \fBX.org:\fR Adds \fBScreen\fR line, which includes the ID (\fBScreen: 0\fR)
then \fBs-res\fR (Screen resolution), \fBs\-dpi\fR. Remember, this is an Xorg
\fBScreen\fR, NOT a monitor screen, and the information listed is about the Xorg
Screen! It may at times be the same as a single monitor system, but usually it's
different in some ways. Note that the physical monitor dpi and the Xorg dpi are
not necessarily the same thing, and can vary widely.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds \fBMonitor\fR lines. Monitors are a subset of a \fBScreen\fR (X.org) or
\fBDisplay\fR (Wayland), each of which can have one or more monitors. Normally a
dual monitor setup is 2 monitors run by one Xorg Screen/Wayland Display.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBpos: [primary,]{position string|row\-col}\fR (X.org: requires
\fBxrandr\fR; Wayland: requires \fBswaymsg\fR [sway], \fBwlr\-randr\fR [wlroots
based compositors], \fBweston\-info\fR / \fBwayland\-info\fR [all]). Uses either
explicit \fBprimary\fR value or +0+0 position if no primary monitor value set.
\fBpos:\fR does not show for single monitor setups, or if no position data was
found.
Position is text (left, center, center-l, center\-r, right, top, top\-left,
top\-center, top\-right, middle, middle\-c, middle\-r, bottom, bottom\-l,
bottom\-c, bottom\-r) if monitors fit within the following grids: 1x2, 1x3, 1x4,
2x1, 2x2, 2x3, 3x1, 3x2, 3x3. If layout not supported in text, uses
[row\-nu]\-[column\-nu] instead to indicate the monitor's position in its grid.
The position is based on the upper left corner of each monitor relative to the
grid of monitors that the \fBXorg\fR \fBScreen\fR is composed of.
\- \fBdiag:\fR monitor screen diagonal in mm (inches). Note that this is the
real monitor size, not the Xorg full Screen diagonal size, which can be quite
different.
\- For free drivers, adds OpenGL compatibility version number if available. For
nonfree drivers, the core version and compatibility versions are usually the
same. Example:
\fBv: 3.3 Mesa 11.2.0 compat\-v: 3.0\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-I\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds init type version number (and rc if present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds other detected installed gcc versions (if present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds system default runlevel, if detected. Supports Systemd/Upstart/SysVinit
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
type defaults.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Shows \fBPackages:\fR counts by discovered package manager types. In cases
where only 1 type had results, does not show total after \fBPackages:\fR. Does
not show installed package managers wtih 0 packages. See \fB\-a\fR for full
output. Moves to \fBRepos\fR if \fB\-rxx\fR.
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
redid patches, I think
2021-08-25 03:39:33 +00:00
\- Adds parent program (or pty/tty) that started shell, if not IRC client.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-xx \-j\fR (\fB\-\-swap\fR), \fB\-xx \-p\fR, \fB\-xx \-P\fR
\- Adds swap priority to each swap partition (for \fB\-P\fR) used, and for all
swap types (for \fB\-j\fR).
.TP
.B \-xx \-J\fR (\fB\-\-usb\fR)
\- Adds vendor:chip id.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-xx \-L\fR, \fB\-xx \-\-logical\fR
\- Adds internal LVM Logical volumes, like raid image and meta data volumes.
\- Adds full list of Components, sub\-components, and their physical devices.
\- For LVM RAID, adds a RAID report line (if not \fB\-R\fR). Read up on LVM
documentation to better understand their use of the term 'stripes'.
New version, new tarball, new man page. Fixed an old bug where if you start inxi with an ssh command sometimes it will not show any client information, just the debugger PPID output. Now it will test as a final check to see if it can detect any parent to the process. Actually grandparent I believe. Seems to work, it's a fringe case but why not handle it? New -xx feature, for -I it will show, if inxi is not running in IRC client and if is running in X, and if the grandparent is not 'login', will show the application the shell is running in. Example: Info: Processes: 271 Uptime: 5:36 Memory: 3255.8/4048.5MB Runlevel: 3 Gcc sys: 4.7.2 alt: 4.0/4.2/4.4/4.5/4.6 Client: Shell (bash 4.2.37 - started in konsole) inxi: 1.8.33
2013-01-29 00:03:06 +00:00
.TP
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
.B \-xx \-m\fR, \fB\-\-memory\-modules\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds memory device Manufacturer.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
redid patches, I think
2021-08-25 03:39:33 +00:00
\- Adds memory device Part Number (\fBpart\-no:\fR). Useful for ordering new
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
or replacement memory sticks etc. Part numbers are unique, particularly if you
use the word \fBmemory\fR in the search as well. With \fB\-xxx\fR, also shows
serial number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds single/double bank memory, if data is found. Note, this may not be
100% right all of the time since it depends on the order that data is found
in \fBdmidecode\fR output for \fBtype 6\fR and \fBtype 17\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new tarball. Another logic redo to handle a fringe case (dmidecode places type 17 in front of type 16), now each array is created as a multidimenstional, 2x array, and each device is a 3 dimensional array. This seems to clean up the problems with bad ordering of dmidecode data.
2014-08-16 23:24:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-M\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds chassis information, if data is available. Also shows BIOS
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
ROM size if using \fBdmidecode\fR.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-N\fR
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds vendor:product ID for each device.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe speed and lanes item (Linux only, and if PCIe device and detected).
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.TP
.B \-xx \-r\fR
\- Adds Packages info. See \fB\-Ixx\fR
Actual new version, support for -xx option for A, G, and N, outputs vendor:product string if found. Updated --help, updated inxi.1.gz man file, updated inxi.tar.gz file. I think that's it unless there's a bug fix.
2012-10-19 19:28:31 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-R\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- md\-raid: Adds superblock (if present) and algorithm. If resync,
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
shows progress bar.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
\- Hardware RAID: Adds Chip vendor:product ID.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
.B \-xx \-s\fR
\- Adds DIMM/SOC voltages, if present (\fBipmi\fR only).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-S\fR
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
\- Adds display manager (\fBdm\fR) type, if present. If none, shows N/A.
Supports most known display managers, including gdm, gdm3,
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
idm, kdm, lightdm, lxdm, mdm, nodm, sddm, slim, tint, wdm, and xdm.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds, if run in X, window manager type (\fBwm\fR), if available. Not all
window managers are supported. Some desktops support using more than one
window manager, so this can be useful to see what window manager is actually
running. If none found, shows nothing. Uses a less accurate fallback tool
\fBwmctrl\fR if \fBps\fR tests fail to find data.
New version, new man. Fixes, a few changes, enhancements. Fixes: 1. Removed /dev/zram type data from swap partitions, since that's ram, it's not a partition, obviously. 2. More alternate IPMI syntax found, that's clearly going to take a while to have most syntaxes handled. 3. Small lm-sensors adjustment, fringe cases might scramble up hwmon and gpu temps, this is now handled. Enhancements: 1. Added disk vendors, udinfo. 2. Exciting! New Architecture: MIPS! First datasets, confirmed working. This led to more abstracting of the previously ARM specific logic to be for SOC in general. 3. Related to 2, added in fallback busybox cases for partition data without fs. 4. Added window managers, xmonad, ratpoison, 9dm, gala (for Pantheon), notion, windowlab 5. Added Pantheon desktop detection. Note, unable to find a way to get version number. 6. IMPI sensors: added in psu fans, dimm temp. 7. New -Cxxx option: cpu boost (aka turbo), state enabled / disabled, only shows if system has that option. Changes: 1. Made toolkit for -S be -xx instead of -x, only Trinity/KDE and XFCE have that data.
2018-07-17 00:43:43 +00:00
\- Adds desktop toolkit (\fBtk\fR), if available (Xfce/KDE/Trinity).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-\-slots\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds slot length.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-xx \-w \fR, \fB\-W\fR
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
\- Adds wind chill, heat index, and dew point, if available.
New version, new man. A few more modifications to weather. Fixes: 1. In case with zero wind speed, it now shows zero, not N/A, as expected. Enhancements: 1. Depending on weather source used: * Shows precipitation, not rain/snow. * Adds Sunrise/sunset (most sources do not have this)
2019-02-08 04:52:41 +00:00
\- Adds cloud cover, rain, snow, or precipitation (amount in previous hour
to observation time), if available.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
.TP
.B \-xxx \-A\fR
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
\- Adds, if present, serial number.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds, if present, PCI/USB class ID.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-xxx \-B\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds battery chemistry (e.g. \fBLi\-ion\fR), cycles (NOTE: there appears to
be a problem with the Linux kernel obtaining the cycle count, so this almost
always shows \fB0\fR. There's nothing that can be done about this glitch, the
data is simply not available as of 2018\-04\-03), location (only available from
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBdmidecode\fR derived output).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds attached device \fBrechargeable: [yes|no]\fR information.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
New version, new man. Fixes, a few changes, enhancements. Fixes: 1. Removed /dev/zram type data from swap partitions, since that's ram, it's not a partition, obviously. 2. More alternate IPMI syntax found, that's clearly going to take a while to have most syntaxes handled. 3. Small lm-sensors adjustment, fringe cases might scramble up hwmon and gpu temps, this is now handled. Enhancements: 1. Added disk vendors, udinfo. 2. Exciting! New Architecture: MIPS! First datasets, confirmed working. This led to more abstracting of the previously ARM specific logic to be for SOC in general. 3. Related to 2, added in fallback busybox cases for partition data without fs. 4. Added window managers, xmonad, ratpoison, 9dm, gala (for Pantheon), notion, windowlab 5. Added Pantheon desktop detection. Note, unable to find a way to get version number. 6. IMPI sensors: added in psu fans, dimm temp. 7. New -Cxxx option: cpu boost (aka turbo), state enabled / disabled, only shows if system has that option. Changes: 1. Made toolkit for -S be -xx instead of -x, only Trinity/KDE and XFCE have that data.
2018-07-17 00:43:43 +00:00
.B \-xxx \-C\fR
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
\- Adds CPU voltage and external clock speed (this is the motherboard speed).
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Requires doas/sudo/root and \fBdmidecode\fR.
\- Adds, if smt (Simultaneous MultiThreading) data is available, after
\fBtype:\fR data \fBsmt: [status]\fR.
.br
\fBsmt: [status]\fR
.br
\fBMT\fR in \fBtype:\fR will show if smt is enabled in general. 3 values are
possible: [\fBenabled|disabled|<unsupported>\fR]. \fB<unsupported>\fR means the
CPU does not support SMT.
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
New version, new man. Fixes, a few changes, enhancements. Fixes: 1. Removed /dev/zram type data from swap partitions, since that's ram, it's not a partition, obviously. 2. More alternate IPMI syntax found, that's clearly going to take a while to have most syntaxes handled. 3. Small lm-sensors adjustment, fringe cases might scramble up hwmon and gpu temps, this is now handled. Enhancements: 1. Added disk vendors, udinfo. 2. Exciting! New Architecture: MIPS! First datasets, confirmed working. This led to more abstracting of the previously ARM specific logic to be for SOC in general. 3. Related to 2, added in fallback busybox cases for partition data without fs. 4. Added window managers, xmonad, ratpoison, 9dm, gala (for Pantheon), notion, windowlab 5. Added Pantheon desktop detection. Note, unable to find a way to get version number. 6. IMPI sensors: added in psu fans, dimm temp. 7. New -Cxxx option: cpu boost (aka turbo), state enabled / disabled, only shows if system has that option. Changes: 1. Made toolkit for -S be -xx instead of -x, only Trinity/KDE and XFCE have that data.
2018-07-17 00:43:43 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-D\fR
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
\- Adds disk firmware revision number (if available).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds disk partition scheme (in most cases), e.g. \fBscheme: GPT\fR.
Currently not able to detect all schemes, but handles the most common, e.g.
\fBGPT\fR or \fBMBR\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version! Fixes!! Bug fixes! More bug fixes!! Cleanups! Most of these were exposed by issue #251 filed by LukasNickel, then further revealed via his debugger data set, which showed two more bugs. Well, bugs, changed syntaxes, same difference to end users. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Work is ongoing to add btrfs support to -R (similar to softraid or zfs), basic stubs and debuggers added, but reporting tools are not as robust (and often require sudo/root for reasons that escape me) as I would have hoped, so it's slow. One of these days... Normally would not release with working stubs, but there were enough real issues/bugs to warrant just getting 3.3.06 out the door, then going on with the btrfs feature for -R. But so far I view the reporting tools as inadequate, unfortunately. -------------------------------------------------------------------------------- BUGS: 1. As initially discovered in issue #251 there are alternate syntaxes which had never been seen before for remote mounts, fuse mounts, etc. In this case, it was fuse.sshfs that was not removed from the Disk total:... used: leading to silly 1000+% used percentage. Note that while technically inxi could try to be clever about reporting impossible percentages, so far those have led to bugs getting reported, then fixed, so I think it worth leaving it as is. 2. When --swap/-j is used with no other arguments, failed to show uuid or label. Discovered this while testing fix 2. 3. Bug which is not a bug but will appear as such to users, nvme temps were failing in -Dx due to a change in how those values are located in /sys. See fix 3. -------------------------------------------------------------------------------- FIXES: 1. Going along with Bug 1, and considering that only in 3.3.05 was the nfs4 remote fs failure to identify/exclude, the entire section involving remote/ fuse etc file systems was refactored, and extended to add many more previously non-handled remote and fuse type file systems. Significant extension of known remote filesystem types, distributed file systems, overlay file systems, all to try to avoid having more distributed/remote/fuse file system issues. Also added test to support fuse. or fuseblk. type prefixes for any of these. Hopefully there will be fewer issues related to distributed and remote and overlay type file systems in the future. 2. Made all label/uuid triggers global, that is, -ol shows unmounted with labels, -ju shows swap with uuid, and so on. This may require a bit more tweaks to get exactly right, but in general, this is a purely cosmetic fix, that is, try not to show label/uuid for partition/mounts that probably can't have those values. 3. There was a change in the way nvme /sys temperature paths were handled, an actually understandable, albeit as always annoying, one, because inxi actually had to do a sort of convoluted hack to get the nvme block devices temperatore paths before, now that hack is not required for newer kernels (5.12+), though for kernels that had the old paths (5,8, 5.9 at least, don't know when paths changed) left in the old method. Now tests are more granular, and inxi should find temperatures regardless of which method is used for nvme and sd type drives. 4. Another somewhat irksome random change, again, understandable since the new syntax is more consistent in output than the previous one, but still breaks all existing parsers that use the changed field names. Lsblk did NOT change the -o input field names, but DID change the output field names, which broke the internal inxi parser, and led to null lsblk data. Changes were - or : separators in input values are output as _ always. that is, MAJ:MIN becomes MAJ_MIN. Also corrected the debugger lsblk to use the same output fields for -P -o as the actual lsblk parser uses internally so these failures can be spotted more readily, as it was, it was literally only because someone submitted the debugger dataset, and was running lsblk 2.37, where I believe this behavior change happened. Solution was to just use regex patterns instead, [:_-], in the parser. Big fear now is that they will randomly stop supporting the -o input field names that contain - or : and change that too without any real warning or deprecation notice. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug and fix 1, added avfs, afs, archivemount, avfs, ceph, gfs, glusterfs, gmailfs, hdfs, ipfs, kosmos/kfs, lafs, mergerfs, mhddfs, moosefs, ocfs, openafs, orangefs, overlayfs, pvfs, s3fs, sheepdog, vmfs, and several others to the exclude list for disk used and show label/uuids for partitions. 2. A smattering of disk vendors added. -------------------------------------------------------------------------------- CHANGES: 1. Going with fix 2, -l and -u no longer will trigger -P by default, now if -l or -u are used without -j, -o, -p, -P, an error will explain that you must use one of those together with -l or -u. This was the only way to get the -l and -u switches to turn off/on label/uuid reports in swap, unmounted, and partitions consistently. Triggering -P was really a legacy behavior from when the only options were -p or -P, and --swap and --unmounted did not exist. I found it increasingly odd that unmounted would show label/uuid always but partitions only with -l/-u. 2. This was a pet peeve, sometimes field names just bug me (like 'Topology: did for CPU, now corrected to Info:), the Drive: rotation: was one such annoyance. I had recycled that to indicate SSD, which was a feature request, but that was always a sloppy solution, and made no sense, since SSD isn't a rotation speed. Now it reports a much more logical: ID-1:...... type: HDD rpm: 7200 or ID-1:...... type: SSD or ID-1:...... type: N/A This also corresponds to the intended meaning much better. The HDD type was always present internally if rotation speed is detected, but was not used. Now will also show type: N/A if reliable type detection failed, which will also be more consistent. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Brought most of inxi.changelog (this file) into a consistent state, re whitespaces, readability, consistent use of various header / section names. Ideally while I don't expect anyone to ever sit down and read this changelog, it will be now much easier to scan to find whatever interests you. This change goes along with ongoing changes in docs to in general try to be usually 80 columns wide. 2. inxi-resources.txt, inxi-data.txt are updated with more raid, partition, file system values and data to go along with bug, fix, enhancement 1. 3. Man and help updated to indicate -u and -l no longer trigger -P by default. -------------------------------------------------------------------------------- CODE: 1. Ongoing refactors, bringing the codebase to the point that matches current coding styles. Removed remainder of whitespaces in conditions and for/while loops, for example: if ( condition ) { becomes: if (condition){ and if ( ( test set 1 ) && ( test set 2 ) ) { becomes: if ((test set 1) && (test set 2)){ and so on. That dropped over 2 KiB of whitespaces. This went along with fixes that have been ongoing to change to this whitespace use style, but previously it was only being done when that situation was hit in a local block, now it's been completed globally. This continues the style refactor that has been ongoing for a while now, to bring inxi into a consistent state, since when it started, it was more pressing to get the bash/gawk mess translated to Perl than it was to get the Perl itself to be as good/consistent as possible, so now those issues are being slowly unravelled, and hopefully will set inxi on course for its next 10 years. It was starting to get annoying, because some parts of inxi used those spaces, and all newer ones didn't in general. Now it's one behavior throughout the whole program file. 2. Refactored the entire fs exclude for disk used data, and integrated those values into a global tool that is used either to exclude file systems from disk used totals, or to not show uuid/labels for the excluded remote/distributed/overlay type file systems, which in general don't have uuid or labels.
2021-07-22 03:30:58 +00:00
\- Adds disk type (\fBHDD\fR/\fBSSD\fR), rotation speed (in some but not all
cases), e.g. \fBtype: HDD rpm: 7200\fR, or \fBtype: SSD\fR if positive SSD
identification was made. If no HDD, rotation, or positive SSD ID found, shows
\fBtype: N/A\fR. Not all HDD spinning disks report their speed, so even if they
redid patches, I think
2021-08-25 03:39:33 +00:00
are spinning, no rpm data will show.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-xxx \-E\fR (\fB\-\-bluetooth\fR)
\- Adds, if present, PCI/USB class ID.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds (\fBhciconfig \fRonly) HCI version, revision.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-xxx \-G\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds, if present, Device PCI/USB class ID.
\- Adds to Device \fBserial:\fR number (if found).
\- \fBXorg:\fR Adds to \fBScreen:\fR \fBs\-size:\fR and \fBs\-diag:\fR. (Screen
size data requires \fBxdpyinfo\fR). This is the X.org Screen dimensions, NOT the
Monitor size!
\- Adds to Monitors (if detected) frequency (\fBhz:\fR).
\- Adds to Monitors (if detected) size (\fBsize: 277x156mm (10.9x6.1")\fR). Note
that this is the real physical monitor size, not the Xorg Screen/Wayland Display
size, which can be quite different (1 Xorg Screen / Wayland Display can for
instance contain two or more monitors).
\- Adds to Monitors \fBmodes: min: max:\fR (if detected). These are the smallest
and largest monitor modes found, using an inexact method, so might not always be
right.
\- Adds to Monitors \fBserial:\fR number (if detected).
\- \fBWayland:\fR Adds to Monitors \fBscale:\fR (if detected).
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
.TP
New version, new man. Bug fixes, new features, enhancements 1. Bug: cause unknown, but crashes on null file sent to reader, but all those files have been checked. For now added return if file null. 2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show running in: xfce-terminal (SSH) ssh session active on remote system. Various help and man cleanups and additions.
2018-03-29 03:57:19 +00:00
.B \-xxx \-I\fR
Bug fixes, new features!! Update now!! Or don't, it's up to you. Bugs: 1. Let's call some of the android fixes and debugger failures bugs, why not? Those are fixed. Note that many of these fixes will impact any system that is ARM based, not just android. Fixes: 1. Related to issue #226 which was a fine issue, fine tuned the debugger debuggers to allow for smoother handling of /sys parse failures. Also added debugger filters for common items that would make the /sys parser hang, oddly, most seem to be in /sys/power for android devices. 2. Added some finetunings for possible mmcblk storage paths, in some cases, an extra /block is added, which made inxi think mounted drives were unmounted. I've never seen this extra /block except on mmcblk devices on android, but you never know, it could be more widespread. 3. Also mainly related to android, but maybe other ARM devices, in some cases, an errant 'timer' device was appearing as a cpu variant, which is wrong. That was a corner case for sure, and part of the variant logic in fact uses timer values to assign the actual cpu variants, but it was wrong in this case because it was ....-timer-mem, not ...-timer, which led to non-existent CPU variants showing. 4. Issue #236 by ChrisCheney pointed out that inxi had never updated its default /proc/meminfo value to use the newer MemAvailable as default if present, which led to incorrect memory used values showing up. That's because back in the old days, we had to construct a synthetic Memory used from MemFree, buffers, cache, etc, but that wasn't always right, since sometimes the cache actually isn't available, often is, but not always. https://github.com/torvalds/linux/commit/34e431b0ae398fc54ea69ff85ec700722c9da773 This commit on the kernel explains it pretty clearly. Thanks Chris for bringing this to our attention. 5. Kind of more future-proofing, got rid of a bunchy of hard-coded strings internally and switched those to use the row_defaults values, which is where string messages are supposed to go. That was mostly in the initial program check messages on start-up, but also a few other stray ones. Also consolidated them a bit to get rid of redundant messages, and added more variable based messages, like for missing/permissions on programs etc. The idea in general is that all the strings are contained in subs so that in theory they could be swapped for other strings, eg, languages, but honestly, I no longer see this as very likely to ever happen. But it's still nice to be consistent internally and not get sloppy with english strings. This also got rid of some largely redundant items in row_defaults, and expanded the list of handled events, and of variable based events, so it shouldn't be as necessary to add new row_defaults items for similar events. Enhancements: 1. Debugger item to maybe try to find distro OEM, this was connected with issue #231 but the issue poster vanished, and didn't do the work required, so this one won't happen until someone who cares [not me, that is] does the required work. It's always funny to see how quickly people vanish when they have to do the actual boring research that they want me to do for them, lol. Or maybe, sigh is more appropriate than lol. But it is pretty much par for the course, sad to say. Or maybe this was an OEM hoping to have someone do their corporate work for them for free, who knows. Anyway, there's a certain category of items that I'm reasonably happy to implement, but NOT if I have to do all the boring research work, so such features being added will depend on the poster actually doing the boring work. I've gotten burned on this a few times, cpu arch: for example, some guy said he'd track that and provide updates, he never even made it to the first release, so I got stuck doing that one forever after. But that one at least has some general value, so that's ok more or less, but I definitely won't take on stuff that I really don't personally care at all about unless the person requesting the feature does all the work beforehand. The boring part, that is.... 2. Related to issue #226, much improved android ID and many small android fixes for machine data etc. Now uses /system/build.prop for some data, which is a nice source, sadly, most modern android devices seem to be locked down, with both build.prop and /sys locked down, which makes inxi unable to actually get any of that data, but if your device either does not have these root only readable, or if you have an android rooted phone, the android support will be more informative. Hint: if you run inxi in termux on your non rooted android device, and it shows you what android version you are using in System:... Distro: line, then your android is not locked down. I have one such phone, android 7.1, but I cannot say how usual or non usual this is. The poster of issue #226 for instance had to root his android 7 phone to get this data to display. So it seems to vary quite a bit. Note that due to these file system lockdowns, in general, trying to do android arm support remains largely a waste of time, but on some devices sometimes, you can now get quite nice system info. As I noted in the issue, if I can't get the features to work on a non rooted phone in my possession, I'm probably not going to try to do the work because it's too hard to try to work on android issues without having the device in front of you for testing and debugging. In this case, one of my phones did work, so I did the work just to see where android is at now. Android showed some slightly odd syntaxes for some devices, but those are now handled where I got a dataset for them that revealed the changes required. 3. Also related to issue #226 for termux in android, will show -r info. That's an apt based package manager, but termux puts the apt files somewhere else so needed to change paths if those alternate paths existed for apt. 4. Added PARTFLAGS to debugger to see what knd of data that will yield, that's a lsblk key/value pair. 5. Just because it's easy to do, added new -Ixxx item, wakeups: which is a subset of Uptime, this will show how many times the system has been woken from suspend since the last boot. If the system has never been suspended, shows 0. 6. Many more disk vendors and disk IDs. The list just never ends, possibly a metaphor for something, the endless spinning of maya, who knows? 7. Added newest known ubuntu release, hirsute, to buntu ID logic. Might as well catch them early, that will be 21.04.
2020-11-11 23:35:08 +00:00
\- For \fBUptime:\fR adds \fBwakeups:\fR to show how many times the machine
has been woken from suspend state during current uptime period (if available,
Linux only). 0 value means the machine has not been suspended.
New version, new man. Bug fixes, new features, enhancements 1. Bug: cause unknown, but crashes on null file sent to reader, but all those files have been checked. For now added return if file null. 2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show running in: xfce-terminal (SSH) ssh session active on remote system. Various help and man cleanups and additions.
2018-03-29 03:57:19 +00:00
\- For \fBShell:\fR adds \fB(su|sudo|login)\fR to shell name if present.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
\- For \fBShell:\fR adds \fBdefault:\fR shell if different from
running shell, and default shell \fBv:\fR, if available.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- For \fBrunning\-in:\fR adds \fB(SSH)\fR to parent, if present. SSH detection
uses the \fBwhoami\fR test.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-xxx \-J\fR (\fB\-\-usb\fR)
\- Adds, if present, serial number for non hub devices.
\- Adds \fBinterfaces:\fR for non hub devices.
\- Adds, if available, USB speed in \fBMbits/s\fR or \fBGbits/s\fR.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds, if present, USB class ID.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds, if non 0, max power in mA.
New version, new man. Bug fixes, new features, enhancements 1. Bug: cause unknown, but crashes on null file sent to reader, but all those files have been checked. For now added return if file null. 2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show running in: xfce-terminal (SSH) ssh session active on remote system. Various help and man cleanups and additions.
2018-03-29 03:57:19 +00:00
.TP
New version, many small fixes. And a hall of shame, LOL. Bugs: 1. Issue #188 exposed a situation in glxinfo where the required opengl fields are present but contain null data. This happens when a system does not have the required opengl drivers, which was the case here. inxi failed to handle that. Thanks LinuxMonger for posting the required data to figure this corner case out. 2. Fixed a long time bug in Disk vendor ID, there was an eq (string equals) where it was supposed to use regex pattern match. Oops. Would have led to disk vendor id failures in several cases. Fixes: 1. help, man updates for RAM/Memory data, more clarifications. 2. Refactored RepoData class/package, to make it easier to handle repo string data, and make it all overall cleaner internally, and enable future extensions to certain features in inxi that may or may not one day become active. 3. Added to some regex compares \Q$VAR\E to disable regex characters in strings. I should have used that a long time ago, oh well, better late than never! 4. Found a horrible case were xdpyinfo uses 'preferred' instead of the actual pixel dimensions, shame on whoever allowed that output!!! shame! Had to add a workaround to make sure numeric values are present, if not, then use the fallback, which means, 2x more data parsing to get data that should not require that, but in this example, it did (an Arch derivative, but it could be xdpyinfo itself, don't know)> Enhancements: 1. More fixes on issue #185. Thanks tubecleaner for finding and provding required data to really solve a set of RAM issues that apply particularly in production systems. This issue report led to 2 new options: --memory-short, which only shows a basic RAM report. Memory: RAM: total: 31.43 GiB used: 14.98 GiB (47.7%) Report: arrays: 1 slots: 4 modules: 2 type: DDR4 And a 2nd, --memory-modules, only shows the occupied slots. This can be useful in situations where it's a server or vm with a lot of slots, most empty: Memory: RAM: total: 31.43 GiB used: 15.44 GiB (49.1%) Array-1: capacity: 256 GiB slots: 4 EC: None Device-1: DIMM 1 size: 16 GiB speed: 2400 MT/s Device-2: DIMM 1 size: 16 GiB speed: 2400 MT/s Note that both of these options trigger -m, so -m itself is not required. 2. More disk vendors!! The list never ends! Thanks linux-lite hardware database and users for supplying, and buying/obtaining, apparently every disk known to mankind. 3. Added fallback XFCE detection, in cases were the system does not have xprop installed, it's still possible to do a full detection of xfce, including toolkit, so now inxi does that, one less dependency to detect one more desktop. 4. Added vmwgfx driver to xorg drivers list. Note, I've never actually seen this in the wild, but I did see it as the kernel reported driver from lspci, so it may exist. Unfixed: 1. Issue #187 EnochTheWise (?) did not supply the required debugger data so there is a RAID ZFS issue that will not get fixed until the required debugger data is supplied. Please do not waste all our time filing an issue if you have no intention of actually following through so we can get it fixed. Note that a key way we get issues here is from Perl errors on the screen, which are a frequent cause of someone realizing something is wrong. This is why I'm not going to do a hack fix for the RAID ZFS issue, then the error messages will go away, and it will likely never get handled. For examples of good, useful, productive issue reports, and how to do them right: #188 and #185, both of which led to good improvements in how inxi handles corner cases in those areas.
2019-08-14 18:14:13 +00:00
.B \-xxx \-m\fR, \fB\-\-memory\-modules\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds memory bus width: primary bus width, and if present, total width. e.g.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBbus width: 64 bit (total: 72 bits)\fR. Note that total / data widths are
mixed up sometimes in dmidecode output, so inxi will take the larger value as
the total if present. If no total width data is found, then inxi will not show
that item.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device Type Detail, e.g. \fBdetail: DDR3 (Synchronous)\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- Adds, if present, memory module voltage. Only some systems will have this
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
data available.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device serial number.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
.B \-xxx \-N\fR
\- Adds, if present, serial number.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
\- Adds, if present, PCI/USB class ID.
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-R\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- md\-raid: Adds system mdraid support types (kernel support, read ahead,
RAID events)
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- zfs\-raid: Adds portion allocated (used) by RAID array/device.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
\- Hardware RAID: Adds rev, ports, and (if available and/or relevant)
\fBvendor:\fR item, which shows specific vendor [product] information.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-xxx \-S\fR
New version, man page. Bug fixes, enhancements. Bugs: 1. A long standing bug was finally identified and fixed. -n/-i would fail to match a Device to the right IF in cases where they had the same chip / vendor IDs. Added busID for non Soc type devices to fix that. I hope. This fix has been tested on a machine that had this bug, and it is now corrected. Thanks skynet for the dataset. 2. deepin-wm was failing to get listed correctly with new fixes, this is corrected. Fixes: 1. mate version was depending on two tools, mate-about and mate-session, which somewhat randomly vary in which has the actual highest version number. Fix was to run both in MATE for version, and run those through a new version compare tool. Thanks mint/gm10 for reporting that bug. 2. -Gxx compositors: added some missing ones that were being checked for in- correctly. 3. For distro id, fixed a glitch in the parser for files, now correctly removes empty () with or without spaces in it. 4. Got rid of ' SOC?' part of no data for ram or slots, that also triggers in non SOC cases, so best to not guess if I can't get it right. Enhancements: 1. More disk vendor ID matches, also, somehow missed QEMU as vendor, thanks to linux hardware database (linuxlite) for great samples of vendor/product strings. 2. Added a bunch of compositors, found a new source that listed a lot inxi did not have already. 3. Added version v: for some compositors in -Gxxx. 4. New program_data() tool provides an easier to use simple program version/print name generator, including extra level tests, to get rid of some code that repeats. 5. Found some useful QEMU virtual machines for ARM, MIPS, PPC, and SPARC, so made initial debugging for each type, so basic working error free support is well on its way for all 4 architectures, which was unexpected. More fine tunings to all of them to avoid bugs, and to catch more devices, as well. Note that QEMU images are hard to make, and they were not complete in terms of what you would see on physical hardware, so I don't know what features will work or not work, there may be further variants in audio/network/graphics IDs that remain unhandled, new datasets always welcome for such platforms! 6. Found yet another desktop! Added Manokwari support, which is at this point a reworking of gnome, but it was identifiable, minus a version number. 7. Added deepin and blankon to system base supported list, these hide their debian roots, so I had to use the manual method to provide system base.
2018-08-28 22:23:19 +00:00
\- Adds, if in X, or with \fB--display\fR, bar/dock/panel/tray items
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
(\fBinfo\fR). If none found, shows nothing. Supports desktop items like
gnome\-panel, lxpanel, xfce4\-panel, lxqt\-panel, tint2, cairo-dock, trayer,
and many others.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- Adds (if present), window manager (\fBwm\fR) version number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
fixed man glitch
2018-07-23 20:40:49 +00:00
\- Adds (if present), display manager (\fBdm\fR) version number.
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
Bugs!! Fixes! Spring cleaning! Because these are either newly created, or newly discovered, bugs, this release was pushed as early as possible to get them fixed asap. BUGS: 1. Desktop: Lumina detection had a syntax error which made it not work. This has been broken for a while. 2. Logical: if not root, and if LUKS / bcache detected, failed to load proc_partitions, which generates error on --logical --admin since the required components data was not loaded. This was an oversight. 3. The 3.3.02 ShellData refactor created a bug for console IRC, showed shell, not irc client, name, and set default shell data which also showed. 4. Console IRC tty: there was also an older bug that made -S, -G not work consistently, and there were errors that had been missed for many years in that logic. These should all be corrected, console irc out of display, or in display as root, should now show tty info, tty size in -G. FIXES: 1. Memory: restored $bsd_type block on /proc/meminfo and force NetBSD to use a corrected vmstat. This leaves that block of logic to correct the NetBSD oddities in meminfo, but it may fix future isses that popup. 2. -Sxxx man page item incorrectly said XDG_VTNR was systemd/linux, it's not, it's various things, GhostBSD has it, for example. See what you get for believing what people say! 3. Logical: added in N/A for null maj-min in --logical report. While bug 2 triggered those errors, there could be future cases where maj-min are null, like BSD lvm data etc. ENHANCEMENTS: 1. Going along with Fix 1, added '--force meminfo' in case you really want that. 2. Distro: System Base: Added TrueNAS detection. 3. Package Data: Added mport [MidnightBSD] type. That requires root to run for some odd reason, so won't see the best output if not root. CHANGES: 1. Moved logical to -v7 from -v8, it's stable enough now. CODE CHANGES: 1. Moved get_tty_number and get_tty_console_irc to ShellData:tty_number and ShellData::tty_console_irc. ShellData::tty_number was being loaded several times, added $loaded{'tty-number'} test, and made client{'tty-number'} to store value. tty_console_irc changed to console_irc_tty, which is what it gets, removed hacks and made it load once and store result in client hash. 2. Optimization: retested sub vs package::method and they run at exactly the same time, give or take, so moving more stuff into packages to make it easier to maintain.
2021-03-18 02:39:02 +00:00
\- Adds (if available, and in display), virtual terminal (\fBvt\fR) number.
These are the same as \fBctrl+alt+F[x]\fR numbers usually. Some systems
have this, some don't, it varies.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
.TP
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.B \-xxx \-w \fR, \fB\-W\fR
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
\- Adds location (city state country), observation altitude (if available),
New version, new man. A few more modifications to weather. Fixes: 1. In case with zero wind speed, it now shows zero, not N/A, as expected. Enhancements: 1. Depending on weather source used: * Shows precipitation, not rain/snow. * Adds Sunrise/sunset (most sources do not have this)
2019-02-08 04:52:41 +00:00
weather observation time (if available), sunset/sunrise (if available).
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.SH ADMIN EXTRA DATA OPTIONS
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
These options are triggered with \fB\-\-admin\fR or \fB\-a\fR. Admin options
are advanced output options, and are more technical, and mostly of interest to
system administrators or other machine admins.
Bugs: 1. Fixed undefined error that could happen, in rare cases, in hdd_temp logic. Fixes: 1. Fixed Elbrus cpu nazming, model 9 is 8CV, not 8CB (Cyrillic error) 2. Preventitive, was not using '-' quite correctly in all regex ranges. 3. Had wrong desktop string listed in Unity 4. Reordered Family/Drive model in usb drive reports, it's to make it more obvious what is what. 5. Adjusted indexing of splits to get better results in corner cases. 6. Fixed some numbering issues. 7. Added trimming n1 from nvme0 type names for nvme, this corrects some issues users were having. 8. Fixed a division by 0 error in smartctl data grabber. 9. Fixed a Perl issue, didn't realize perl treats 000 as a string, not 0. 10. Another Perl fix, int() only wants to get numeric values sent to it, I'd assumed a different behavior, non numerics get converted to 0, but that's not how Perl sees things. Things like this, by the way, are why Perl is so absurdly fast. Enhancements: 1. More disk vendors. The list will never be complete!! We have found eternal churn!! Thanks to linux lite hardware database as always. 2. Big one!!! Now inxi uses smartctl data, if installed, for getting advanced drive information (with -a). See man and help for details. Will show failing drives, etc. Lots of info can be available, but sometimes data is not in smartctl db, so inxi can't find it, that's not an inxi bug, it's just how it is. 3. Made hours on more human readable, into days/hours, for -a smartctl disk report. 4. Added $test[12] for smartctl data printout, and $test[13] for disk array print out. Note that advanced debugger outputs can change or vary depending on what is being worked on so don't in general rely on these always being around. But they do tend to say stuck in place once I add them. 5. Added some nvme stuff, spare reserve, if you need it, you'll appreciate it, if not, you'll never know it's there. 6. By request from some forum issue thread: made --host only be shown onif not --filter or not --host. This makes -z remove hostname, but retains ability to do absolute overrides. Hostname should have always been filtered out like that, it was an oversight. I think that was Manjaro who asked that, but I forget. Note that this change, as usual, will not alter expected behaviors if users have config item for hostname set. 7. Added support for picom compositor, thanks user codebling for that, I think that's compiz fork, the real branch that is that is being developed.
2020-03-15 06:15:16 +00:00
The \fB\-\-admin\fR option sets \fB\-xxx\fR, and only has to be used once.
It will trigger the following features:
Bug fixes!!! New Features!! Why wait!!! Bugs: 1. Issue #220 on github: inxi misidentified XFCE as Gnome. This was a kind of core issue, and pointed to some logic that needed updating, and some inadequate assumptions made, and some too loose cascade of tests. Hopefully now xfce will almost never get misidentified, and the other primary desktops ID'ed either from $ENV or from xrop -root will be slightly more accurately identified as well. Note that this fix creates a possibility for obscure misconfigured desktops to be ID'ed wrong, but in this case, that will be technically a bug for them, but with the new fixes, that situation will be cleaner to handle internally in the desktop ID logic. Also tightened the final Gnome fallback detection to not trigger a possible false positive, it was testing for ^_GNOME but that is not adequate, because some gnome programs will trigger these values in xprop -root even if GNOME is not running. Should be safer now, hopefully no new bugs will be triggered by these changes. Fixes: 1. Missed an indentation level for -y1, gcc alt should have been indented in one more level, now it is. 2. In disk vendors/family, didn't clean items starting with '/', this is now corrected. Yes, some do, don't ask me why. Might be cases like: Crucial/Micron maybe, where the first ID is grabbed, not sure. Enhancements: 1. New Disk vendors, vendor IDs!!! The list never ends!!! We've finally found infinity, and it is the unceasing wave of tiny and not so tiny disks and their Ids. 2. New feature: for -Aa, -Na/-na/-ia, -Ga, now will add the modules the kernel could support if they were available on the Device-x lines of those items. This was made an -a option because it really makes no sense, if it's a regular option, users might think that for example an nvidia card had a nouveua driver when it didn't, when in fact, all the kernel is saying is that it knows those listed modules 'couid' be used or present. This corresponds to the Display: item in -Ga, that lists 'alternate:' drivers that Xorg knows about that could likewise be used, if they were on the system. In other words these are --admin options because otherwise users might get confused, so this is one where you want to know the man explanation before you ask for it. It is useful however if you're not sure what your choices are for kernel modules. When the alternate driver is the same as the active driver, or if none is found, it does not show the alternate: item to avoid spamming.
2020-07-27 02:22:59 +00:00
.TP
.B \-a \-A\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds, if present, possible \fBalternate:\fR kernel modules capable of
driving each \fBDevice\-x\fR (not including the current \fBdriver:\fR). If no
non\-driver modules found, shows nothing. NOTE: just because it lists a module
does NOT mean it is available in the system, it's just something the kernel
knows could possibly be used instead.
Bug fixes!!! New Features!! Why wait!!! Bugs: 1. Issue #220 on github: inxi misidentified XFCE as Gnome. This was a kind of core issue, and pointed to some logic that needed updating, and some inadequate assumptions made, and some too loose cascade of tests. Hopefully now xfce will almost never get misidentified, and the other primary desktops ID'ed either from $ENV or from xrop -root will be slightly more accurately identified as well. Note that this fix creates a possibility for obscure misconfigured desktops to be ID'ed wrong, but in this case, that will be technically a bug for them, but with the new fixes, that situation will be cleaner to handle internally in the desktop ID logic. Also tightened the final Gnome fallback detection to not trigger a possible false positive, it was testing for ^_GNOME but that is not adequate, because some gnome programs will trigger these values in xprop -root even if GNOME is not running. Should be safer now, hopefully no new bugs will be triggered by these changes. Fixes: 1. Missed an indentation level for -y1, gcc alt should have been indented in one more level, now it is. 2. In disk vendors/family, didn't clean items starting with '/', this is now corrected. Yes, some do, don't ask me why. Might be cases like: Crucial/Micron maybe, where the first ID is grabbed, not sure. Enhancements: 1. New Disk vendors, vendor IDs!!! The list never ends!!! We've finally found infinity, and it is the unceasing wave of tiny and not so tiny disks and their Ids. 2. New feature: for -Aa, -Na/-na/-ia, -Ga, now will add the modules the kernel could support if they were available on the Device-x lines of those items. This was made an -a option because it really makes no sense, if it's a regular option, users might think that for example an nvidia card had a nouveua driver when it didn't, when in fact, all the kernel is saying is that it knows those listed modules 'couid' be used or present. This corresponds to the Display: item in -Ga, that lists 'alternate:' drivers that Xorg knows about that could likewise be used, if they were on the system. In other words these are --admin options because otherwise users might get confused, so this is one where you want to know the man explanation before you ask for it. It is useful however if you're not sure what your choices are for kernel modules. When the alternate driver is the same as the active driver, or if none is found, it does not show the alternate: item to avoid spamming.
2020-07-27 02:22:59 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe generation, and, if different than running PCIe generation, speed
or lanes, \fBlink\-max: gen: speed: lanes:\fR (only items different from primary
shown).
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
pre tag last fix, added -a to trigger --admin, that makes it easier for forum output, like: inxi -Fxxxaz
2018-09-08 00:03:27 +00:00
.B \-a \-C\fR
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds CPU family, model\-id, and stepping (replaces \fBrev\fR of \fB\-Cx\fR).
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Format is \fBhexadecimal (decimal)\fR if greater than 9, otherwise
\fBhexadecimal\fR.
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds CPU microcode. Format is \fBhexadecimal\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds socket type (for motherboard CPU socket, if available). If results
doubtful will list two socket types and \fBnote: check\fR. Requires
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
doas/sudo/root and \fBdmidecode\fR. The item in parentheses may simply be a
different syntax for the same socket, but in general, check this before trusting
it.
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Sample: \fBsocket: 775 (478) note: check\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.br
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Sample: \fBsocket: AM4\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds DMI CPU base and boost/turbo speeds. Requires doas/sudo/root and
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBdmidecode\fR. In some cases, like with overclocking or 'turbo' or 'boost'
modes, voltage and external clock speeds may be increased, or short term limits
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
raised on max CPU speeds. These are often not reflected in /sys based CPU
\fBmin/max:\fR speed results, but often are using this source.
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Samples:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.br
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
CPU not overclocked, with boost, like Ryzen:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.nf
\fBSpeed (MHz):
avg: 2861
high: 3250
min/max: 1550/3400
boost: enabled
base/boost: 3400/3900\fR
.fi
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Overclocked 2900 MHz CPU, with no boost available:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.nf
\fBSpeed (MHz):
avg: 2345
high: 2900
min/max: 800/2900
base/boost: 3350/3000\fR
.fi
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Overclocked 3000 MHz CPU, with boosted max speed:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
.nf
\fBSpeed (MHz):
avg: 3260
high: 4190
min/max: 1200/3001
base/boost: 3000/4000\fR
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
.fi
Note that these numbers can be confusing, but basically, the \fBbase\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
number is the actual normal top speed the CPU runs at without boost mode, and
the \fBboost\fR number is the max speed the CPU reports itself able to run at.
The actual max speed may be higher than either value, or lower. The \fBboost\fR
number appears to be hard\-coded into the CPU DMI data, and does not seem to
reflect actual max speeds that overclocking or other combinations of speed
boosters can enable, as you can see from the example where the CPU is running
at a speed faster than the min/max or base/boost values.
New inxi, man. New information types, fixes, man updates. Bugs: No bugs of any importance fixed or found!! Fixes: 1. Tiny fix, didn't use partition/slice assignment in help menu. BSD interest only since default partition is standard for Linux. Enhancements: 1. Disc Vendors: added a large number of possible disk vendors, without having actual detection data available for all of them, using a different source. Also added, as usual, more disc vendor IDs from linux-lite hardware database, always ready with more vendors! 2. Added groovy gorilla ID for ubuntu 3. Very nice usability change, mostly for support people, now if -y without an integer is supplied, it will assign default column width of 80, which is what you usually want for forums or issue reports, otherwise the output can wrap outside the post or issue report, which is hard to read. Hopefully support people will catch onto this one. 4. This closes issue #217 - Adds dmidecode based extra data: -xxx - shows CPU voltage and external clock speeds -a - shows CPU socket type and base/boost: speed items. These are --admin options because neither is particularly reliable, sometimes they are right, sometimes they aren't, as usual with dmi data. As far as tests show, base speed, what dmidecode misleadingly calls 'Current Speed', which it isn't, is the actual normal non throttled speed of the CPU / motherboard setup. boost is what dmidecode calls 'Max Speed', which it also isn't, though sometimes it is, as with AMD cpus with boost, and no overclocking. With overclocking, sometimes base will be higher, sometimes the actual real current cpu speeds will be higher than all the max/boost values. Motherboard CPU socket type is likewise randomly correct, incorrect, empty, misleading, depending on the age and type of the system, and the CPU vendor. It appears that in general, AMD CPUs will be more or less right if they have this data, and Intel CPUs will sometimes be right, sometimes not, or empty. For > 1 CPU systems, the data is much less reliable.
2020-05-31 21:41:20 +00:00
Note that the normal \fBmin/max:\fR speeds do NOT show actual overclocked OR
boost/turbo mode speeds, and appear to be hard\-coded values, not dynamic real
values. The \fBbase/boost:\fR values are sometimes real, and sometimes not.
\fBbase\fR appears in general to be real.
Quick bug fix release. With as many changes as we got in 3.3.10, there were bound to be a handful of oversights that were not caught in testing simply because those hardware scenarios were not present in the tested systems. Also minor feature enhancement for CPU scaling min/max speeds. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Due to the huge amount of changes, and the speed of change, while the new code is working as intended, it's somewhat lacking in coding elegance since a lot of it was hacked out very quickly, in near real time. This will get cleaned up and refactored to be less redundant if it does not impact execution speed, but is not pressing since there should be no functional difference. -------------------------------------------------------------------------------- BUGS: 1. Tiny oversight, in single case CPU model id would fail because it was using an undefined test from previous tests, not the right test, that is. Tripped error on Elbrus for example. 2. Typo in battery secondary type status, created undefined value error. This was I believe an older bug. -------------------------------------------------------------------------------- FIXES: 1. PPC revision change broke Elbrus revision test for stepping. Added in more tests to show stepping for elbrus revision. 2. Single core Elbrus in cpuinfo fallback mode failed to assign core multiplier so L1 cache failed. 3. In cpuinfo fallback mode, Elbrus E2C3 cache data failed to appear, that data in not per block in cpuinfo, but is the last block, so those tests had to run on each block, not just the first one. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Show for -Ca scaling min/max speeds if different from CPU min/max speeds. 2. If no cpuinfo_min/max_freq speeds found, and scaling_min/max_freq found, set overall min/max to use scaling min/max instead of cpuinfo min/max. -------------------------------------------------------------------------------- CHANGES: 1. None. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Cleaned up and proofread better 3.3.10 changelog, it had a lot of errors because stuff kept changing. -------------------------------------------------------------------------------- CODE: 1. Small code optimizations.
2021-12-17 00:17:02 +00:00
\- Adds frequency \fBscaling: governor:.. driver:..\fR if found/available. Also
adds scaling min/max speeds if different from standard CPU min/max spees (not
common).
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- Adds description of cache topology per cpu. Linux only.
\- Creates new \fBTopology:\fR line after the \fBInfo:\fR line. Moves cache data
to this line from \fBInfo:\fR line.
Topology line contains, if available and/or relevant: physical CPU count
(\fBcpus:\fR); per physical cpu core count (cores:\fR); threads per core, if > 1
(\fBtpc:\fR); how many \fBthreads:\fR (if more threads than cores); \fBdies:\fR
(rarely detected, but if so, if > 1); smt status (if no smt status found, shows
\fBN/A\fR).
If complex CPU type, like Alder lake, cores; will have a more granular breakdown
of how many mt (multi\-threaded) and how many st (single\-threaded) cores there
in the physical cpu ( \fBmt\-cores:\fR, \fBst\-cores:\fR); For complex CPU
types like ARM SoC devices with 2 CPU types, with different core counts and/or
\fBmin/max:\fR) frequencies, \fBvariant:\fR per type found, with relevant
differences shown, like \fBcores:, \fBmin/max:\fR, etc.
.nf
\fBCPU:
Info:
model: AMD EPYC 7281
bits: 64
type: MT MCP MCM SMP
arch: Zen
family:0x17 (23)
model\-id:1
stepping: 2
microcode: 0x8001250
Topology:
cpus: 2
cores: 16
tpc: 2
threads: 32
dies: 4
cache:
L1: 2x 1.5 MiB (3 MiB)
desc: d\-16x32 KiB; i\-16x64 KiB
L2: 2x 8 MiB (16 MiB)
desc: 16x512 KiB
L3: 2x 32 MiB (64 MiB)
desc: 8x4 MiB
Speed (MHz):
avg: 1195
high: 1197
min/max: 1200/2100
boost: enabled
scaling:
lintian edit
2021-12-14 18:42:16 +00:00
driver: acpi\-cpufreq
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
governor: ondemand
cores:
1: 1195
2: 1196
....
bogomips: 267823
.fi
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds CPU Vulnerabilities (bugs) as known by your current kernel. Lists by
New version, man page. Fixes, enhancements, changes. Thanks: 1. AntiX forums, for testing -C --admin, suggestions, always helpful. Bugs: 1. Added switch to set @ps_gui, I forgot case where info block was only thing that used ps_gui (Nitrux kde nomad latte case). This led to no info: data if other ps_gui switches not activated. Now each block that can use it activates it. Fixes: 1. To clarify issue #161 added help/man explanation on how to get colors in cases where you want to preserve colors for piped or redirected output. Thanks fugo. 2. LMDE 3.0 released, slightly different system base handling, so refactored to add Debian version, see enhancement 2. Tested on some old vm instances, improved old system Debian system base id, but it's empirical, distro by distro, there is no rule I can use to automatically do it, sadly. 3. 'Motherboard' sensors field name added, a few small tweaks to sensors. This was in response to issue #159, which also raised a problem I was not really aware of, user generated sensor config files, that can have totally random field names. Longer term solution, start getting data from sys to pad out lm-sensors data, or to handle cases where no lm-sensors installed. 4. Fixed kwin_11 and kwin_wayland compositor print names, I'd left out the _, which made it look strange, like there were two compositors or something. 5. Fixed latte-dock ID, I thought the program name when running was latte, not latte-dock. inxi checks for both now. Thanks Nitrux for exposing that in vm test. 6. Sensors: added in a small filter to motherboard temp, avoid values that are too high, like SYSTIN: 118 C, filters out to only use < 90 C. Very unlikely a mobo would be more than 90C unless it's a mistake or about to melt. This may correct anoymous debugger dataset report from rakasunka. Enhancements: 1. Added --admin to -v 8 and to --debugger 2x 2. Expanded system base to use Debian version tool, like the ubuntu one, that lets me match version number to codename. The ubuntu one matches code names to release dates. Added Neptune, PureOS, Sparky, Tails, to new Debian system base handler. 3. Big enhancement: --admin -C now shows a nice report on cpu vulnerabilities, and has a good error message if no data found. Report shows: Vulnerabilities: Type: [e.g. meltdown] status/mitigation: text explanation. Note: 'status' is for when no mitigation, either not applicable, or is vulnerable. 'mitigation' is when it's handled, and how. Thanks issue #160 Vascom from Fedora for that request. 4. The never-ending saga of disk vendor IDs continues. More obscure vendors, more matches to existing vendors. Thanks linuxlite/linux hardware database Changes: 1. Reordered usb output, I don't know why I had Hubs and Devices use different ordering and different -x switch priorities, that was silly, and made it hard to read. Now shows: Device/Hub: bus-id-port-id[.port-id]:device-id info: [product info] type/ports: [devices/hubs] usb: [type, speed] -x adds drivers for devices, and usb: speed is now default for devices, same as Hubs. Why I had those different is beyond me. The USB ordering is now more sensible, the various components of each matching whether hub or device. Unfixable or Won't Fix: 1. Unable to detect Nomad desktop. As far as I can tell, Nomad is only a theme applied to KDE Plasma, there is no program by that name detectable, only a reference in ps aux to a theme called nomad. 2. Nitrux system base ID will not work until they correct their /etc/os-release file. 3. Tails live cd for some inexplicable reason uses non standard /etc/os-release field names, which forces me to either do a custom detection just for them, or for them to fix this bug. I opted for ignoring it, if I let each distro break standard formats then try to work around it, the distro ID will grow to be a 1000 lines long easily. Will file distro bug reports when I find these from now on. Samples: This shows the corrected, cleaned up, consistent usb output: inxi -y80 --usb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID usb: 1.1 Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse usb: 1.1 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse usb: 1.1 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> usb: 2.0 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network usb: 2.0 Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 inxi -y80 --usb -xxxz USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 chip ID: 1d6b:0002 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 chip ID: 03eb:0902 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID driver: cm109,snd-usb-audio interfaces: 4 usb: 1.1 chip ID: 0d8c:000e Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse driver: usbhid,wacom interfaces: 1 usb: 1.1 chip ID: 056a:0011 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 usb: 1.1 chip ID: 0d3d:0001 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> driver: N/A interfaces: 1 usb: 2.0 chip ID: 04a9:1909 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network driver: asix interfaces: 1 usb: 2.0 chip ID: 05ac:1402 serial: <filter> Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 chip ID: 1d6b:0003 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 chip ID: 1d6b:0003
2018-09-07 20:58:55 +00:00
\fBType: ... (status|mitigation): ....\fR for systems that support this feature
(Linux kernel 4.14 or newer, or patched older kernels).
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
.TP
man edits
2019-05-01 02:06:19 +00:00
.B \-a \-d\fR,\fB\-a \-D\fR
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
\- Adds logical and physical block size in bytes.
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Using \fBsmartctl\fR (requires doas/sudo/root privileges).
Bugs: 1. Fixed undefined error that could happen, in rare cases, in hdd_temp logic. Fixes: 1. Fixed Elbrus cpu nazming, model 9 is 8CV, not 8CB (Cyrillic error) 2. Preventitive, was not using '-' quite correctly in all regex ranges. 3. Had wrong desktop string listed in Unity 4. Reordered Family/Drive model in usb drive reports, it's to make it more obvious what is what. 5. Adjusted indexing of splits to get better results in corner cases. 6. Fixed some numbering issues. 7. Added trimming n1 from nvme0 type names for nvme, this corrects some issues users were having. 8. Fixed a division by 0 error in smartctl data grabber. 9. Fixed a Perl issue, didn't realize perl treats 000 as a string, not 0. 10. Another Perl fix, int() only wants to get numeric values sent to it, I'd assumed a different behavior, non numerics get converted to 0, but that's not how Perl sees things. Things like this, by the way, are why Perl is so absurdly fast. Enhancements: 1. More disk vendors. The list will never be complete!! We have found eternal churn!! Thanks to linux lite hardware database as always. 2. Big one!!! Now inxi uses smartctl data, if installed, for getting advanced drive information (with -a). See man and help for details. Will show failing drives, etc. Lots of info can be available, but sometimes data is not in smartctl db, so inxi can't find it, that's not an inxi bug, it's just how it is. 3. Made hours on more human readable, into days/hours, for -a smartctl disk report. 4. Added $test[12] for smartctl data printout, and $test[13] for disk array print out. Note that advanced debugger outputs can change or vary depending on what is being worked on so don't in general rely on these always being around. But they do tend to say stuck in place once I add them. 5. Added some nvme stuff, spare reserve, if you need it, you'll appreciate it, if not, you'll never know it's there. 6. By request from some forum issue thread: made --host only be shown onif not --filter or not --host. This makes -z remove hostname, but retains ability to do absolute overrides. Hostname should have always been filtered out like that, it was an oversight. I think that was Manjaro who asked that, but I forget. Note that this change, as usual, will not alter expected behaviors if users have config item for hostname set. 7. Added support for picom compositor, thanks user codebling for that, I think that's compiz fork, the real branch that is that is being developed.
2020-03-15 06:15:16 +00:00
\- Adds device model family, like \fBCaviar Black\fR, if available.
\- Adds SATA type (eg 1.0, 2.6, 3.0) if a SATA device.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\- Adds device kernel major:minor number (Linux only).
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds SMART report line: status, enabled/disabled, health, powered on, cycles,
and some error cases if out of range values. Note that for Pre\-fail items, it
will show the VALUE and THRESHOLD numbers. It will also fall back for unknown
attributes that are or have been failing and print out the Attribute name,
value, threshold, and failing message. This way even for unhandled Attribute
names, you should get a solid report for full failure cases. Other cases may
show if inxi believes that the item may be approaching failure. This is a guess
so make sure to check the drive and smartctl full output to verify before taking
any further action.
Bugs: 1. Fixed undefined error that could happen, in rare cases, in hdd_temp logic. Fixes: 1. Fixed Elbrus cpu nazming, model 9 is 8CV, not 8CB (Cyrillic error) 2. Preventitive, was not using '-' quite correctly in all regex ranges. 3. Had wrong desktop string listed in Unity 4. Reordered Family/Drive model in usb drive reports, it's to make it more obvious what is what. 5. Adjusted indexing of splits to get better results in corner cases. 6. Fixed some numbering issues. 7. Added trimming n1 from nvme0 type names for nvme, this corrects some issues users were having. 8. Fixed a division by 0 error in smartctl data grabber. 9. Fixed a Perl issue, didn't realize perl treats 000 as a string, not 0. 10. Another Perl fix, int() only wants to get numeric values sent to it, I'd assumed a different behavior, non numerics get converted to 0, but that's not how Perl sees things. Things like this, by the way, are why Perl is so absurdly fast. Enhancements: 1. More disk vendors. The list will never be complete!! We have found eternal churn!! Thanks to linux lite hardware database as always. 2. Big one!!! Now inxi uses smartctl data, if installed, for getting advanced drive information (with -a). See man and help for details. Will show failing drives, etc. Lots of info can be available, but sometimes data is not in smartctl db, so inxi can't find it, that's not an inxi bug, it's just how it is. 3. Made hours on more human readable, into days/hours, for -a smartctl disk report. 4. Added $test[12] for smartctl data printout, and $test[13] for disk array print out. Note that advanced debugger outputs can change or vary depending on what is being worked on so don't in general rely on these always being around. But they do tend to say stuck in place once I add them. 5. Added some nvme stuff, spare reserve, if you need it, you'll appreciate it, if not, you'll never know it's there. 6. By request from some forum issue thread: made --host only be shown onif not --filter or not --host. This makes -z remove hostname, but retains ability to do absolute overrides. Hostname should have always been filtered out like that, it was an oversight. I think that was Manjaro who asked that, but I forget. Note that this change, as usual, will not alter expected behaviors if users have config item for hostname set. 7. Added support for picom compositor, thanks user codebling for that, I think that's compiz fork, the real branch that is that is being developed.
2020-03-15 06:15:16 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds, for USB or other external drives, actual model name/serial if
available, and different from enclosure model/serial, and corrects block sizes
if necessary. Adds in drive temperature for some drives as well, and other
useful data.
Bugs: 1. Fixed undefined error that could happen, in rare cases, in hdd_temp logic. Fixes: 1. Fixed Elbrus cpu nazming, model 9 is 8CV, not 8CB (Cyrillic error) 2. Preventitive, was not using '-' quite correctly in all regex ranges. 3. Had wrong desktop string listed in Unity 4. Reordered Family/Drive model in usb drive reports, it's to make it more obvious what is what. 5. Adjusted indexing of splits to get better results in corner cases. 6. Fixed some numbering issues. 7. Added trimming n1 from nvme0 type names for nvme, this corrects some issues users were having. 8. Fixed a division by 0 error in smartctl data grabber. 9. Fixed a Perl issue, didn't realize perl treats 000 as a string, not 0. 10. Another Perl fix, int() only wants to get numeric values sent to it, I'd assumed a different behavior, non numerics get converted to 0, but that's not how Perl sees things. Things like this, by the way, are why Perl is so absurdly fast. Enhancements: 1. More disk vendors. The list will never be complete!! We have found eternal churn!! Thanks to linux lite hardware database as always. 2. Big one!!! Now inxi uses smartctl data, if installed, for getting advanced drive information (with -a). See man and help for details. Will show failing drives, etc. Lots of info can be available, but sometimes data is not in smartctl db, so inxi can't find it, that's not an inxi bug, it's just how it is. 3. Made hours on more human readable, into days/hours, for -a smartctl disk report. 4. Added $test[12] for smartctl data printout, and $test[13] for disk array print out. Note that advanced debugger outputs can change or vary depending on what is being worked on so don't in general rely on these always being around. But they do tend to say stuck in place once I add them. 5. Added some nvme stuff, spare reserve, if you need it, you'll appreciate it, if not, you'll never know it's there. 6. By request from some forum issue thread: made --host only be shown onif not --filter or not --host. This makes -z remove hostname, but retains ability to do absolute overrides. Hostname should have always been filtered out like that, it was an oversight. I think that was Manjaro who asked that, but I forget. Note that this change, as usual, will not alter expected behaviors if users have config item for hostname set. 7. Added support for picom compositor, thanks user codebling for that, I think that's compiz fork, the real branch that is that is being developed.
2020-03-15 06:15:16 +00:00
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
.TP
.B \-a \-E\fR (\fB\-\-bluetooth\fR)
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds (\fBhciconfig\fR only) extra line to \fBReport:\fR, \fBInfo:\fR.
Includes, if available, ACL MTU, SCO MTU, Link policy, Link mode,
and Service Classes.
Bug fixes!! New Feature!! Edits, cleanups!! Bugs: 1. Small bug, wrong regex would make mdraid unused report never show. Was looking for ^used, not ^unused. No idea how that happened, but it's fixed. 2. Big RAID bug. Due to never having seen an 'inactive' state mdraid dataset, inxi had a bunch of bugs around that. I'd assumed active and inactive would have roughly the same syntax, but they don't. This is now corrected. Thanks Solus user for giving me the required data. This case when not corrected resulted in a spray of errors as RAID ran, and a fairly incomplete RAID report for mdraid. 3. A bug that probably never impacted anyone, but in SMART the matching rules failed to match field name Size[s]? in the logical/physical block sizes. However, those were already coming in from I believe pre-existing /sys data for the drives but now it's fixed anyway. I had not realized that smartctl made it plural when logical/physical were different, and singular when they were the same. Fixes: 1. Going along with bug 2, fixed some other admin/non admin report glitches. Made patterns more aggressively matching, whitelist based to avoid the types of syntax issues that caused bug 2. 2. Added 'faulty' type to mdraid matches, that had not been handled. 3. Found even more of those pesky 'card' references in help and man page, replaced all of them with 'device[s]'. 4. Subtle fix, for debugger data collectors, added -y1 support, which can be useful at times. Enhancements: 1. In USB data grabber, added fallback case for unspecified type cases, now uses a simple name/driver string test to determine if it's graphics, audio, or bluetooth. This was mainly to make sure bluetooth usb devices get caught. 2. New feature! -E/--bluetooth. Gives an -n like bluetooth Device-x/Report. Requires for the 'Report:' part hciconfig, which most all distros still have in their repos. With -a, shows an additional Info: line that has more obscure bluetooth hci data: acl-mtu sco-mtu, link-policy, link-mode, service-classes. This closes the ancient, venerable issue #79, filed by mikaela so many years ago. Better late than never!! However, features like this were really difficult in legacy bash/gawk inxi 2.x, and became fairly easy with inxi 3.x, so I guess we'll slowly whittle away at these things when the mood, and global pandemic lockdowns, make that seem like a good idea... Includes a small lookup table to match LMP number to Bluetooth version (bt-v:), hopefully that's a correct way to determine bluetooth version, there was some ambiguity about that. -x, -xx, and -xxx function pretty much the same way as with -A, -G, and -N devices, adding Chip IDs, Bus IDs, version info, and so on. Since this bluetooth report does not require root and is an upper case option, it's been added to default -F, similar to -R, and -v 5, where raid/bluetooth shows only if data is found. With -v7 or -R or -E, always shows, including no data found message. Includes a fallback report Report-ID: case where for some reason, inxi could not match the HCI ID with the device. That's similar to IF-ID in -n, which does the same when some of the IFs could not be matched to a specific device. 3. For -A, -G, -N, and -E, new item for -xxx, classID, I realized this is actually useful for many cases of trying to figure out what devices are, though most users would not know what to do with that information, but that's why it's an -xxx option! 4. Yes! You've been paying attention!! More disk vendors, and new vendor IDs!! The cornucopia flows its endless bounty over the grateful data collector, and, hopefully, inxi users!! Thanks as always, linux-lite hardware database, and linux-lite users who really seem set on the impossible project of obtaining all the disks/vendors known to man. Changes: 1. Small change in wording for mdraid report: 'System supported mdraid' becomes 'Supported mdraid levels' which is cleaner and much more precise.
2021-01-29 04:02:42 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe generation, and, if different than running PCIe generation, speed
or lanes, \fBlink\-max: gen: speed: lanes:\fR (only items different from primary
shown. Bluetooth PCIe rare).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-a \-G\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds, if present, possible \fBalternate:\fR kernel modules capable of driving
each \fBDevice\-x\fR (not including the current \fBloaded:\fR). If no
non\-driver modules found, shows nothing. NOTE: just because it lists a module
does NOT mean it is available in the system, it's just something the kernel
knows could possibly be used instead.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe generation, and, if different than running PCIe generation, speed
or lanes, \fBlink\-max: gen: speed: lanes:\fR (only items different from primary
shown).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds to Monitors \fBbuilt:\fR, \fBgamma:\fR, \fBratio:\fR (if found).
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
X.org sample (with both \fBxdpyinfo\fR and \fBxrandr\fR data available):
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.nf
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fBinxi \-aGz
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Graphics:
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Device\-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] vendor: XFX Pine
driver: radeon v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link\-max:
gen: 2 speed: 5 GT/s ports: active: DVI\-I\-1,VGA\-1 empty: HDMI\-A\-1
bus-ID: 0a:00.0 chip-ID: 1002:68f9 class\-ID: 0300
Display: x11 server: X.Org v: 1.20.13 compositor: xfwm v: 4.16.1 driver: X:
loaded: modesetting gpu: radeon display\-ID: :0.0 screens: 1
Screen\-1: 0 s\-res: 2560x1024 s\-dpi: 96 s\-size: 677x270mm (26.7x10.6")
s\-diag: 729mm (28.7")
Monitor\-1: DVI\-I\-1 pos: primary,left model: SyncMaster serial: <filter>
built: 2004 res: 1280x1024 hz: 60 dpi: 96 gamma: 1.2
size: 338x270mm (13.3x10.6") diag: 433mm (17") ratio: 5:4 modes:
max: 1280x1024 min: 720x400
Monitor\-2: VGA\-1 pos: right model: DELL 1908FP serial: <filter>
built: 2008 res: 1280x1024 hz: 60 dpi: 86 gamma: 1.4
size: 376x301mm (14.8x11.9") diag: 482mm (19") ratio: 5:4 modes:
max: 1280x1024 min: 720x400
man page typo fix
2020-07-27 03:36:27 +00:00
....\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.fi
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Wayland sample, with Sway/swaymsg:
.nf
\fBinxi \aGz
Graphics:
Device\-1: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD
5000/6000/7350/8350 Series] vendor: XFX Pine
driver: radeon v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 ports:
active: DVI\-I\-1,VGA\-1 empty: HDMI\-A\-1 bus\-ID: 0a:00.0 chip\-ID: 1002:68f9
class\-ID: 0300
Display: wayland server: Xwayland v: 21.1.4 compositor: sway v: 1.6.1
driver: gpu: radeon d\-rect: 2560x1024
Monitor-1: DVI\-I\-1 pos: right model: SyncMaster serial: <filter>
built: 2004 res: 1280x1024 hz: 60 dpi: 96 gamma: 1.2
size: 340x270mm (13.4x10.6") diag: 434mm (17.1") ratio: 5:4 modes:
max: 1280x1024 min: 720x400
Monitor\-2: VGA-1 pos: primary,left model: DELL 1908FP serial: <filter>
res: 1280x1024 hz: 60 gamma: 1.4 dpi: 86 gamma: 1.4
size: 380x300mm (15.0x11.8") diag: 484mm (19.1") ratio: 5:4 modes:
max: 1280x1024 min: 720x400
Message: Wayland GBM/EGL data currently not available.
.fi
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.TP
.B \-a \-I\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds Packages, totals, per package manager totals, and number of lib packages
detected per package manager. Also adds detected package managers with 0
packages listed. Moves to \fBRepos\fR if \fB\-ra\fR.
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.nf
\fBinxi \-aI
Info:
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
....
Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9
Packages: apt: 3681 lib: 2096 rpm: 0 Shell: ksh v: A_2020.0.0 default: Bash
v: 5.0.16 running\-in: kate inxi: 3.1.04\fR
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.fi
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- Adds service control tool, tested for in the following order: \fBsystemctl
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
rc\-service rcctl service sv /etc/rc.d /etc/init.d\fR. Can be useful to know
which you need when using an unfamiliar machine.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.B \-a \-j\fR, \fB\-a \-P\fR [swap], \fB\-a \-P\fR [swap]
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds swappiness and vfs cache pressure, and a message to indicate if the
value is the default value or not (Linux only, and only if available). If not
the default value, shows default value as well, e.g.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
For \fB\-P\fR per swap physical partition:
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBswappiness: 60 (default) cache\-pressure: 90 (default 100)\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
For \fB\-j\fR row 1 output:
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBKernel: swappiness: 60 (default) cache\-pressure: 90 (default 100)\fR
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\- Adds device kernel major:minor number (Linux only).
.TP
.B \-a \-L\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Expands Component report, shows size / maj-min of components and devices, and
mapped name for logical components. Puts each component/device on its own line.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\- Adds maj-min to LV and other devices.
Bug fixes!!! New Features!! Why wait!!! Bugs: 1. Issue #220 on github: inxi misidentified XFCE as Gnome. This was a kind of core issue, and pointed to some logic that needed updating, and some inadequate assumptions made, and some too loose cascade of tests. Hopefully now xfce will almost never get misidentified, and the other primary desktops ID'ed either from $ENV or from xrop -root will be slightly more accurately identified as well. Note that this fix creates a possibility for obscure misconfigured desktops to be ID'ed wrong, but in this case, that will be technically a bug for them, but with the new fixes, that situation will be cleaner to handle internally in the desktop ID logic. Also tightened the final Gnome fallback detection to not trigger a possible false positive, it was testing for ^_GNOME but that is not adequate, because some gnome programs will trigger these values in xprop -root even if GNOME is not running. Should be safer now, hopefully no new bugs will be triggered by these changes. Fixes: 1. Missed an indentation level for -y1, gcc alt should have been indented in one more level, now it is. 2. In disk vendors/family, didn't clean items starting with '/', this is now corrected. Yes, some do, don't ask me why. Might be cases like: Crucial/Micron maybe, where the first ID is grabbed, not sure. Enhancements: 1. New Disk vendors, vendor IDs!!! The list never ends!!! We've finally found infinity, and it is the unceasing wave of tiny and not so tiny disks and their Ids. 2. New feature: for -Aa, -Na/-na/-ia, -Ga, now will add the modules the kernel could support if they were available on the Device-x lines of those items. This was made an -a option because it really makes no sense, if it's a regular option, users might think that for example an nvidia card had a nouveua driver when it didn't, when in fact, all the kernel is saying is that it knows those listed modules 'couid' be used or present. This corresponds to the Display: item in -Ga, that lists 'alternate:' drivers that Xorg knows about that could likewise be used, if they were on the system. In other words these are --admin options because otherwise users might get confused, so this is one where you want to know the man explanation before you ask for it. It is useful however if you're not sure what your choices are for kernel modules. When the alternate driver is the same as the active driver, or if none is found, it does not show the alternate: item to avoid spamming.
2020-07-27 02:22:59 +00:00
.TP
.B \-a \-n\fR, \fB\-a \-N\fR, \fB\-a \-i\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds, if present, possible \fBalternate:\fR kernel modules capable of driving
each \fBDevice\-x\fR (not including the current \fBdriver:\fR). If no
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
non\-driver modules found, shows nothing. NOTE: just because it lists a module
does NOT mean it is available in the system, it's just something the kernel
knows could possibly be used instead.
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- Adds PCIe generation, and, if different than running PCIe generation, speed
or lanes, \fBlink\-max: gen: speed: lanes:\fR (only items different from primary
shown).
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-a \-o\fR
\- Adds device kernel major:minor number (Linux only).
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
.TP
.B \-a \-p\fR,\fB\-a \-P\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds raw partition size, including file system overhead, partition table,
e.g.
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBraw\-size: 60.00 GiB\fR.
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
\- Adds percent of raw size available to \fBsize:\fR item, e.g.
\fBsize: 58.81 GiB (98.01%)\fR.
Note that \fBused: 16.44 GiB (34.3%)\fR percent refers to the available size,
not the raw size.
\- Adds partition filesystem block size if found (requires root and blockdev).
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\- Adds device kernel major:minor number (Linux only).
New version, new man, new feature!! Bug fixes! Bugs: 1. issue #182 - in freebsd, there was an oversight in the pciconf parser, it was using unfiltered strings as regex pattern, and of course, a string flipped an error. Fix was to add the regex cleaner to the string before it's used in test. 2. NOTE: issue #182 had a second bug, but the issue poster didn't follow up with data or output so it couldn't be fixed. This was related to a syntax change in usbdevs -v output in FreeBSD. Such changes are too common, but it might also simply be a variant I have not seen or handled, but so far no data, so can't fix. Don't blame me if you get this bug, but do post requested debugger data if you want it fixed! Fixes: 1. Updated man for weather, explained more clearly how to use country codes for weather output. More clarifying in general about weather location, and weather restrictions. Enhancements: 1. Added avx/avx2 to default flag list in -C short form. Thanks damentz from liquorix for clarifying why that was a good idea. Note the initial issue came up in a Debian issue report, not here. People!! please post issues here, and don't bug maintainers with feature requests! Maintainers aren't in a position to add a feature, so you should go straight to the source. 1.a. Created in inxi-perl/docs new doc file: cpu-flags.txt, which explains all the flags, and also covers the short form flags and explains why they are used. 2. To resolve another issue, I made a new documentation file: inxi-perl/docs/inxi-custom-recommends.txt This is instructions for maintainers of distros who do not use rpm/apt/pacman but still want the --recommends feature to output their package pool package names for missing packages. I decided to not allow more than the default 3 package managers because no matter what people say, if I allow in more, the maintainer will vanish or lose interest, and I'll be stuck having to maintain their package lists forever. Also, it's silly to even include that package list for any distro that does not use rpm/apt/pacman, since the list is just wasted lines. Instructions in doc file show what to change, and how, and has an example to make it clear. Odds of this actually being used? Not high, lol, but that's fine, if people want it done, they can do it, if not, nothing bad happens, it just won't show any suggested install package, no big deal. 3. Using the new disk vendor method, added even more disk vendors. Thanks linux litet hardware database!! 4. EXCITING!! A new --admin/-a option, suggested by a user on techpatterns.com/forums/ Now -S or -b or -F with -a option for GNU/Linux shows the kernel boot parameters, from /proc/cmdline. Didn't find anything comparable for BSDs, if you can tell me where to look, I'll add it for those too, but wasn't anywhere I looked. Do the BSDs even use that method? Don't know, but the logic is there, waiting to be used if someone shows me how to get it cleanly. The 'parameters:' item shows in the main 'System:' -S output, and will just show the entire kernel parameters used to boot. This could be very helpful to distros who often have to determine if for example graphics blacklists are correctly applied for non free drivers, like nomodeset etc, or if the opposite is present. For forum/distro support, they just have to ask for: inxi -ba and they will see t the relevant graphics info, for instance, or -SGaxxx, or -Faxxx, whatever is used to trigger in this case the graphics and system lines. 5. Updated man/help for 4 as well, now explains what they will see with --admin/ -a options and -S. Good user suggestion, I wish all new features were this easy, heh.
2019-05-01 00:56:10 +00:00
.TP
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.B \-a \-r\fR
\- Adds Packages. See \fB\-Ia\fR
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-a \-R\fR
\- Adds device kernel major:minor number (mdraid, Linux only).
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- Adds, if available, component size, major:minor number (Linux only). Turns
Component report to 1 component per line.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
New version, new man, huge update, bug fixes, cleanups, updates!! What started as a relatively minor issue report ended up with a refactor of big chunks of some of the oldest code and logic in inxi. So many bugs and fixes, updates, and enhancements, that I will probably miss some when I try to list them. Bugs: 1. In the process of fixing an issue about sudo use triggering server admin emails on failure, when --sudo/--no-sudo and their respective configuration items were added, sudo was inadvertently disabled because the test ran before the options were processed, which meant the condition to set sudo data was always false, so sudo for internal use was never set. The solution was to set a flag in the option handler and set sudo after options or configs run. 2. Issue #219 reported gentoo and one other repo type would fail to show enabled repos, and would show an error as well, this was due to forgetting to make the match test case insensitive. If only all bugs were this easy to fix!! 3. I'd seen this bug before, and couldn't figure out why it existed. It turned out that the partition blacklist filters were running fine in the main partition data tool, but I had forgotten to add in corresponding lsblk partition data filters, lol, so when the logic went back and double checked for missing partitions [this feature had been if i remember right to be able to show hidden partitions, which the standard method didn't see, but lsblk did, anyway, when the double check and add missing partitions logic ran, inxi was putting back in the blacklisted partitions every time, despite the original blacklists working well and as intended. This was fixed by adding in all the required fs type blacklists, then adding in comments above each black list reminding coders that if they add or remove from one blacklist, they have to do the same on the other. 4. Found while testing something unrelated on older vm, the fallback case for cpu bugs, which was supposed to show the basic /proc/cpuinfo cpu bugs, was failing inexplicably because the data was simply being put into the wrong variable name, sigh. Fixes: 1. While not technically an inxi bug, it would certainly appear that way to anyone who triggered it. We'd gotten issue reports before on this, but they were never complete, so couldn't figure it out. Basically, if someone puts inxi into a simple script that is $PATH [this was the missing fact needed to actually trigger this bug in order to fix it], the script [not inxi], will then enter into an endless loop as inxi queries it for its version number using <script name> --version. This issue didn't happen if the script calling inxi was not in PATH, which is why I'd never been able to figure it out before. Only simple scripts with no argument handlers could trigger this scenario, and only if they were in PATH. Fixing this required refactoring the entire start get_shell_data logic, which ended up with a full refactor of the program_version logic as well. The fix was to expand the list of shells known by inxi so it would be able to recognize when it was in a shell running a script running inxi. This resulted in several real improvements, for instance, inxi will now almost always be able to determine the actual shell running inxi, even when started by something else. It will also never use --version attempts on programs it does not know about in a whitelist. So we lose slightly the abilty to get version data on unknown shells, but we gain inxi never being able to trigger such an infinite loop situation. 2. As part of the program_version refactor, a long standing failure to get ksh, lksh, loksh, pdksh, and the related posh shells, all of which ID their version numbers only if they are running the command in themselves. The mistake had been having the default shell run that command. These all now correctly identify themselves. 3. As part of the wm upgrades, many small failures to ID version numbers, or even wm's, in some cases, were discovered when testing, and corrected. Some I had not tested, like qtile, and the lisp variants, were not being detected correctly by the tests due to the way python or lisp items are listed in ps aux. 4. As part of the wm update and program_version refactor, updated and simplified many desktop and wm detections and logic blocks. Ideally this makes them more preditable and easy to work on for the future. 5. As some last tunings for the new -y1 key: value pair per line output option, fixed some small glitches in -b indentation. Also improved RAID indenting, and Weather, and made it all very clean and predictable in terms of indentations. 6. Something I'd slightly noticed but never done anything about, while testing desktop fixes, I realized that for Desktop: item, dm: is a secondary data type, but if it's Console:, then DM: is a primary data type, not a secondary one. So now if Console: it becomes DM: whic makes sense, previously it implied a dm: was used to start the console, which was silly. Also, since often the reason it's Console: with no dm in the first place is that it's a server with no dm. So now if console, and no dm detected, rather than showing DM: N/A it just doesn't show dm at all. 7. As part of the overall core refactor, the print_data logic was also refactored and simplified, by making -y1 a first class citizen, it led to significantly different way of being able to present inxi data on your screen, and now print_data logic is cleaner and reflects these changes more natively, all the initial hacks to get this working were removed, and the logic was made to be core, not tacked on. 8. A small thing also revealed in issue #219, battery data was not being trimmed, not sure how I missed that, but in some cases, space padding was in the values and was not removed, which leads to silly looking inxi output. 9. Several massive internal optimizations, which were tested heavily, led to in one case, 8-900x faster execution the second time a data structure is used, previously in program_values the entire list was loaded each time program_values was called, now it's loaded into a variable on first load and the variable is used for the tests after that. This was also done for the vendor_version for disk vendors, which also features a very long data structure which can be loaded > 1 times for instances where a system has > 1 disk. I also tested while I was at it, to see if loading these tyeps of data structures, arrays of arrays, or hashes of arrays, by reference, or by dereferencing their arrays, was faster, and it proved that it's about 20% faster to not dereference them, but to use them directly. So I've switched a number of the fixed data structures internally do use that method. Another tiny optimization was hard resetting the print_data iterator hash, while this would never matter in the real world, it showed that resetting the iterator hash manually was slightly more efficient than resetting it with a for loop. 10. While not seen inside inxi, I updated and improved a number of the vm's used to test inxi and various software detections, so now I have a good selection, going back to 2008 or so, up to current. This is helpful because things like shells and window managers and desktops come and go, so it is hard to test old detections on new stuff when you can't install those anymore. You'll see these fixes in many of the less well known window managers, and in a few of the better known ones, where in some cases the detections were damaged. 11. As part of the program_version refactor, updated and fixed file based version detections, those, ideally, will almost never be used. Hopefully programmers of things like window managers, shells, and desktops, can learn how to handle --version requests, even though I realize that's a lot harder than copying someone's code and then rebranding as your own project, or whatever excuse people have for not including a --version item in their softaware. Enhancements: 1. As a result of the shell, start shell, shell parent refactors, inxi was able to correctly in most cases deetermine also the user default shell and its verison, so that was added as an -Ixxx option: Shell: ksh v: A_2020.0.0 default: Bash v: 5.0.16 2. As part of the program_version refactor, a more robust version number cleaner was made, which now allows for much more manipulation of the version number string, which sometimes contains, without spaces, non version number ' info right before the actual version. 3. Many more wm IDs were created and tested, and some old virtual machines that were used years ago were used again to test old window managers and their IDs, as well as new vms created to test newer ones. Many version IDs and WM ids were fixed in this process as well. All kinds of new ones added, though the list is basiclaly endless so ideally inxi would only use its internal data tables for window managers that have actual users, or did. 4. First wayland datatype, now it may show Display ID: with -Ga, so far that's the only wayland screen/display data I can get reliably. 5. As part of the shell parent/started in: updates and fixes, added every shell I could find, and installed and tested as many of them as possible to verify that either they have no version method, or that their version method works. This shell logic also is used to determine start parent. Obviously using whitelists of things that can change over time isn't ideal, but there was no way to actually do it otherwise. The best part of the fixes is that it's now remarkably difficult to trick inxi into reporting the wrong shell, and it generally will also get the default shell right, though I found cases in testing where a shell when started replaces the value in $SHELL with itself. 6. I found a much faster and reasonably reliable way to determine toolkits used by gtk desktops, like cinnamon, gnome, and a few others. Test is to get version from gtk-launcher, which is MUCH faster than doing a package version query on the random libgtk toolkit that might be tested, and actually was tested for pacman, apt, and rpm in the old days, but that was removed because it was a silly hack. It's possible that now and then gtk desktops will be 0.0.1 versions off, but in most cases, the version matched, so I decided to restore the tk: item for a selection of gtk or gnome based desktops. So now gtk desktops, except mate, which of course will be using gtk 2 for a while longer, toolkit version should be working again, and the new method works on everything, unlike the old nasty hack that was used, which required package queries and guessing at which gtk lib was actually running the desktop, it was such a slow nasty hack that it was dumped a while ago, but this new method works reliably in most cases and solves most of the issues. 7. As part of the overall program_versions refactor, the package version tester tool was extended to support pacman, dpkg, and rpm, which in practical terms covers most gnu/linux users and systems. Since this feature is literally only used for ASH and DASH shell version detections, it was really just added as a proof of concept, and because it fit in well with the new Package counts feature of -I/-r. 8. Updated for version info a few other programs, added compositors as well. 9. Last but not least!! More disk vendor IDs, more disk vendors!! And found another source to double check vendor IDs, that's good. New Features: 1. For -Ix/-rx, -Ixx/-rxx, -Ia/-ra, now inxi shows package counts for most package managers plus snap, flatpak, and appimage. I didn't test appimage so I'm not 100% sure that works, but the others are all tested and work. If -r, Packages shows in the Repos item as first row, which makes sense, packages, repos, fits. Note that in some systems getting full package counts takes some time so it's an -x option not default. If -rx, -rxx, -ra, package info moved to -r section, and if -Ix, -Ixx, or -Ia, the following data shows: * -Ix or -rx: show total package counts: Packages: 2429 * -Ixx or -rxx: shows Packages then counts by package manager located. If there was only one package manager with packages, the total moves from right after Packages: to the package manager, like: Packages: apt: 3241 but if there were for example 2 or more found, it would show the total then: Packages 3245 apt:3241 snap: 4 * -Ia or -ra: adds package managers with 0 packages managed, those are not show with -xx, and also shows how many of those packages per package manager is a library type lib file. Sample: inxi -Iay1 Info: Processes: 470 Uptime: 8d 10h 42m Memory: 31.38 GiB used: 14.43 GiB (46.0%) Init: systemd v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 5/6/7/8/9 Packages: apt: 3685 lib: 2098 rpm: 0 Shell: Elvish v: 0.13.1+ds1-1 default: Bash v: 5.0.16 running in: kate pinxi: 3.1.04-1
2020-06-29 05:22:12 +00:00
.TP
New version, new man, new feature!! Bug fixes! Bugs: 1. issue #182 - in freebsd, there was an oversight in the pciconf parser, it was using unfiltered strings as regex pattern, and of course, a string flipped an error. Fix was to add the regex cleaner to the string before it's used in test. 2. NOTE: issue #182 had a second bug, but the issue poster didn't follow up with data or output so it couldn't be fixed. This was related to a syntax change in usbdevs -v output in FreeBSD. Such changes are too common, but it might also simply be a variant I have not seen or handled, but so far no data, so can't fix. Don't blame me if you get this bug, but do post requested debugger data if you want it fixed! Fixes: 1. Updated man for weather, explained more clearly how to use country codes for weather output. More clarifying in general about weather location, and weather restrictions. Enhancements: 1. Added avx/avx2 to default flag list in -C short form. Thanks damentz from liquorix for clarifying why that was a good idea. Note the initial issue came up in a Debian issue report, not here. People!! please post issues here, and don't bug maintainers with feature requests! Maintainers aren't in a position to add a feature, so you should go straight to the source. 1.a. Created in inxi-perl/docs new doc file: cpu-flags.txt, which explains all the flags, and also covers the short form flags and explains why they are used. 2. To resolve another issue, I made a new documentation file: inxi-perl/docs/inxi-custom-recommends.txt This is instructions for maintainers of distros who do not use rpm/apt/pacman but still want the --recommends feature to output their package pool package names for missing packages. I decided to not allow more than the default 3 package managers because no matter what people say, if I allow in more, the maintainer will vanish or lose interest, and I'll be stuck having to maintain their package lists forever. Also, it's silly to even include that package list for any distro that does not use rpm/apt/pacman, since the list is just wasted lines. Instructions in doc file show what to change, and how, and has an example to make it clear. Odds of this actually being used? Not high, lol, but that's fine, if people want it done, they can do it, if not, nothing bad happens, it just won't show any suggested install package, no big deal. 3. Using the new disk vendor method, added even more disk vendors. Thanks linux litet hardware database!! 4. EXCITING!! A new --admin/-a option, suggested by a user on techpatterns.com/forums/ Now -S or -b or -F with -a option for GNU/Linux shows the kernel boot parameters, from /proc/cmdline. Didn't find anything comparable for BSDs, if you can tell me where to look, I'll add it for those too, but wasn't anywhere I looked. Do the BSDs even use that method? Don't know, but the logic is there, waiting to be used if someone shows me how to get it cleanly. The 'parameters:' item shows in the main 'System:' -S output, and will just show the entire kernel parameters used to boot. This could be very helpful to distros who often have to determine if for example graphics blacklists are correctly applied for non free drivers, like nomodeset etc, or if the opposite is present. For forum/distro support, they just have to ask for: inxi -ba and they will see t the relevant graphics info, for instance, or -SGaxxx, or -Faxxx, whatever is used to trigger in this case the graphics and system lines. 5. Updated man/help for 4 as well, now explains what they will see with --admin/ -a options and -S. Good user suggestion, I wish all new features were this easy, heh.
2019-05-01 00:56:10 +00:00
.B \-a \-S\fR
\- Adds kernel boot parameters to \fBKernel\fR section (if detected). Support
varies by OS type.
New version, updated man page, new tarball. Fixed partition bug that could falsely identify a remote filesystem like nfs as /dev fs Added two options: -! 31 - Turns off Host section of System line. This is useful if you want to post output from server without posting its name. -! 32 - Turns on Host section if it has been disabled by user configuration file B_SHOW_HOST='false' Added missing CPU data message, fixed missing cpu cache/bogomips output, turned off bogomips if null for bsd systems because bogomips is a linux kernel feature. Added N/A for no memory report, this would mainly hit bsd systems where user has no permissions to use sysctl or has no read rights for /var/run/dmesg.boot. Many fixes for partitions, now for bsd, if available, uses gpart list to get uuid/label Added support for raid file system syntax in bsd, now excludes main raid device name, and adds a flag to raiddevice/partitionname type so output can identify it as a raid slice/partition. In man page, added -! 31 / -! 32 sections, and some other small edits. Added bsd raid line error message, added bsd sensors line error message. Many other small bug fixes that should make linux more robust in terms of missing data, and better/cleaner output for bsd.
2013-02-18 20:33:05 +00:00
.SH ADVANCED OPTIONS
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 40\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Bypass \fBPerl\fR as a downloader option. Priority is: Perl (HTTP::Tiny), Curl,
Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 41\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Bypass \fBCurl\fR as a downloader option. Priority is: Perl (HTTP::Tiny), Curl,
Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 42\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Bypass \fBFetch\fR as a downloader option. Priority is: Perl (HTTP::Tiny), Curl,
Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-alt 43\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Bypass \fBWget\fR as a downloader option. Priority is: Perl (HTTP::Tiny), Curl,
Wget, Fetch, OpenBSD only: ftp
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
.B \-\-alt 44\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Bypass \fBCurl\fR, \fBFetch\fR, and \fBWget\fR as downloader options. This
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
basically forces the downloader selection to use \fBPerl 5.x\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\fBHTTP::Tiny\fR, which is generally slower than \fBCurl\fR or \fBWget\fR but it
may help bypass issues with downloading.
New version, tarball, man page. New option -! 40 which lets you get gfx information out of X. Default will get data from display :0, but if you append :[display-number] to -! 40, it will use that display instead, for example: inxi -! 40:1 would get information from display 1. Note that most multi-monitor setups use :0 for both monitors, depending on how it's setup. This will also let users see any desktop information based on xrop -root output, but it will depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for primary detection would not work, for example.
2017-06-09 02:29:55 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
.TP
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
.B \-\-bt\-tool [bt\-adapter|hciconfig|rfkill]\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Force the use of the given tool for bluetooth report (\fB\-E\fR). \fBrfkill\fR
does not support mac address data.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-\-dig\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Temporary override of \fBNO_DIG\fR configuration item. Only use to test w/wo
dig. Restores default behavior for WAN IP, which is use dig if present.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
New version, tarball, man page. New option -! 40 which lets you get gfx information out of X. Default will get data from display :0, but if you append :[display-number] to -! 40, it will use that display instead, for example: inxi -! 40:1 would get information from display 1. Note that most multi-monitor setups use :0 for both monitors, depending on how it's setup. This will also let users see any desktop information based on xrop -root output, but it will depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for primary detection would not work, for example.
2017-06-09 02:29:55 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-\-display [:<integer>]\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Will try to get display data out of X (does not usually work as root user).
Default gets display info from display \fB:0\fR. If you use the format
\fB\-\-display :1\fR then it would get it from display \fB1\fR instead, or any
display you specify.
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note that in some cases, \fB\-\-display\fR will cause inxi to hang endlessly
when running the option in console with Intel graphics. The situation regarding
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
other free drivers such as nouveau/ATI is currently unknown. It may be that this
is a bug with the Intel graphics driver \- more information is required.
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
You can test this easily by running the following command out of X/display
server: \fBglxinfo \-display :0\fR
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
If it hangs, \fB\-\-display\fR will not work.
New version, tarball, man page. New option -! 40 which lets you get gfx information out of X. Default will get data from display :0, but if you append :[display-number] to -! 40, it will use that display instead, for example: inxi -! 40:1 would get information from display 1. Note that most multi-monitor setups use :0 for both monitors, depending on how it's setup. This will also let users see any desktop information based on xrop -root output, but it will depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for primary detection would not work, for example.
2017-06-09 02:29:55 +00:00
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
.B \-\-dmidecode\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Shortcut. See \fB\-\-force dmidecode\fR.
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-downloader [curl|fetch|perl|wget]\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Force inxi to use Curl, Fetch, Perl, or Wget for downloads.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
.TP
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
.B \-\-force [colors|dmidecode|hddtemp|lsusb|pkg|usb-sys|wayland|vmstat|wmctrl]\fR
Various force options to allow users to override defaults. Values be given as a
comma separated list:
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\fBinxi \-MJ --force dmidecode,lsusb\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\- \fBcolors\fR \- Same as \fB\-Y \-2\fR . Do not remove colors from piped or
redirected output.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- \fBdmidecode\fR \- Force use of \fBdmidecode\fR. This will override
\fB/sys\fR data in some lines, e.g. \fB\-M\fR or \fB\-B\fR.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- \fBhddtemp\fR \- Force use of hddtemp instead of /sys temp data for disks.
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBlsusb\fR \- Forces the USB data generator to use \fBlsusb\fR as data
source (default). Overrides \fBUSB_SYS\fR in user configuration file(s).
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Many small updates, enhancements, bug fixes!!! We've been saving them up!! Here they are!! Don't wait!! Thanks mr. mazda for many issue finds, and suggestions. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. Due to unfixable rpm slowdowns, removed package counts for default output for rpm based systems. We were seeing delays of up to 30+ seconds just to list the rpm package count, which is absurd, even after the rpm optimizations inxi already runs. To allow rpm users to get excluded by default for rpm package list counts, added --pkg flag plus a short message telling them to use that flag to get the installed package count if they want it. Changes like this are very unfortunate, but in 2021 for a package manager at times to require over 30 seconds to generate a trivial installed package list is just not acceptable. One of the reasons this release was delayed was this was not an easy decision to make, it's very rare support for a feature is removed for specific tools due to how badly the tools may perform. Note that whatever higher level tool is used, like dnf, zypp, it's still the same speed, they all appear to use the same core engine. Basically this decision was forced since either inxi looks really bad and slow, when it's not, or the actual cause was removed from default outputs. -------------------------------------------------------------------------------- BUGS: 1. Small bug in nfs blacklist for disk used led to nfs used being added, which leads to silly used percents. This is corrected. 2. If ram vendor ID failed, inxi would delete the part number. Oops. This was related to the Mushkin failures. 3. Close to a bug, though not one internally, but to users would appear as one: ZFS does not act as expected, zpool list did not in fact return the pool size, which I had always assumed to be the case, but in a very strange decision, does return something very close to the pool size for mirrors, but NOT for z1 or z2 pools, then it returns the total size of the drives that make up the pool. To call this strange behavior would be an understatement. The fix was to modify the logic to use zfs list instead to get the size data. This also makes the drive total report far more accurate, since it lists usable space now for ZFS as was always intended. The cause of this was simply that I'd always had access to zfs mirrors, not z1 or z2 arrays. -------------------------------------------------------------------------------- FIXES: 1. OpenSuse and maybe others use kdm3 for Trinity, not kdm, so dm was failing. 2. Going along with fix 1, made kde version detection more robust so may catch more fringe / corner cases for kde desktops. These were mainly added to correct Trinity desktop version detections. 3. Mushkin ram vendor ID was failing, that is or should be corrected. 4. Added in /dev/disk/by-id handlers for zpool components, there are several variants, wwn-, pci-, scsi-, ata-, but they all map to the real /dev drive IDs. Failure to unmap these led to failing to match components and get size info etc for zfs. 5. See DOCUMENTATION: 2, language changes for weather feature abuse. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going along with the rpm issues, added dnf.conf support to yum/dnf repo types. Not sure how that one was missed, but there it is. This should tighten repo reports for dnf/yum/zypp types. 2. Added LeftWM. LeftWM confirmed working. Added unverifed detections for: penrose, 2bwm, 5dwm, catwm, mcwm, monsterwm, snapwm, uwm, wingo, wmfs, wmfs2. 3. Added xfwm as a compositor type, that had bee left out, somewhat on purpose, since xfwm can run in compositing or non compositing mode. But should show since many users use compositing mode now. 4. Added OpenMediaVault distro ID and systembase handlers. 5. Going along with zfs bug fix 3, using zfs list data for free, size, allocated. Trying to understand how zfs developers actually thought about this is nearly impossible so just used what seems to correspond to reality most. Also shows raw values for zfs data in RAID along with regular ones to make clear which is which value. 6. Added more CPU architecture ID matches for AMD Zen and a variety of Intel. Both vendors finally released some new CPUs and the data became available, which doesn't always happen quickly. 7. A bunch of new disk vendors and vendor IDs added. Never stops, like the sands of time, like the ocean waves, like the scuttling crabs scrounding around in the seaweed in the foam where the outgoing wave left its mark... -------------------------------------------------------------------------------- DOCUMENTATION: 1. Added leftwm keybindinigs to inxi-data.txt desktop/wm section. Updated more wm in that section as well, and list more info on wms for future reference etc. Also reorganized and more more readable wm section. 2. Help/Man now make more clear that automated requests or excessive use of the inxi weather feature are not under any circumstance permitted. There had been some ambiguity and lack of clarity about what abuse is, now it should be more clear. -------------------------------------------------------------------------------- CODE CHANGES: 1. Refactored uptime parser logic, the code and regex was just getting too messy and difficult to work with and debug, now it works similar to how the revised BSD parsers run, the regex are pulled apart and made more granular so a small syntax change ideally won't break the detections as easily. 2. Cleaned up sub cpu_arch() and made all the arch values line up nicely, over time I notice that almost invariably stuff done to save lines of code makes code harder to read as the feature expands, so it's generally worth just unravelling it so it all stacks and is easy to scan/read. Also removed extra white space in parens, which is something I'm leaning more towards but it's not worth fixing all at once so it's just done where it's noticed. That's using: if ( /test/ ){ rather than: if (/test){ I believe using more white space helped with Perl comprehension in the intermediate stages, but is not required anymore and just looks like extra whitespace now.
2021-07-12 02:32:13 +00:00
\- \fBpkg\fR \- Force override of disabled package counts. Known package
managers with non\-resolvable issues:
rpm: Due to up to 30 seconds delays executing
.nf
\fBrpm \-qa \-\-nodigest \-\-nosignature\fR
.fi
on older hardware (and over 1 second on new hardware with some rpm versions)
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
package counts are disabled by default because of the unacceptable slowdowns to
execute a simple package list command.
Many small updates, enhancements, bug fixes!!! We've been saving them up!! Here they are!! Don't wait!! Thanks mr. mazda for many issue finds, and suggestions. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. Due to unfixable rpm slowdowns, removed package counts for default output for rpm based systems. We were seeing delays of up to 30+ seconds just to list the rpm package count, which is absurd, even after the rpm optimizations inxi already runs. To allow rpm users to get excluded by default for rpm package list counts, added --pkg flag plus a short message telling them to use that flag to get the installed package count if they want it. Changes like this are very unfortunate, but in 2021 for a package manager at times to require over 30 seconds to generate a trivial installed package list is just not acceptable. One of the reasons this release was delayed was this was not an easy decision to make, it's very rare support for a feature is removed for specific tools due to how badly the tools may perform. Note that whatever higher level tool is used, like dnf, zypp, it's still the same speed, they all appear to use the same core engine. Basically this decision was forced since either inxi looks really bad and slow, when it's not, or the actual cause was removed from default outputs. -------------------------------------------------------------------------------- BUGS: 1. Small bug in nfs blacklist for disk used led to nfs used being added, which leads to silly used percents. This is corrected. 2. If ram vendor ID failed, inxi would delete the part number. Oops. This was related to the Mushkin failures. 3. Close to a bug, though not one internally, but to users would appear as one: ZFS does not act as expected, zpool list did not in fact return the pool size, which I had always assumed to be the case, but in a very strange decision, does return something very close to the pool size for mirrors, but NOT for z1 or z2 pools, then it returns the total size of the drives that make up the pool. To call this strange behavior would be an understatement. The fix was to modify the logic to use zfs list instead to get the size data. This also makes the drive total report far more accurate, since it lists usable space now for ZFS as was always intended. The cause of this was simply that I'd always had access to zfs mirrors, not z1 or z2 arrays. -------------------------------------------------------------------------------- FIXES: 1. OpenSuse and maybe others use kdm3 for Trinity, not kdm, so dm was failing. 2. Going along with fix 1, made kde version detection more robust so may catch more fringe / corner cases for kde desktops. These were mainly added to correct Trinity desktop version detections. 3. Mushkin ram vendor ID was failing, that is or should be corrected. 4. Added in /dev/disk/by-id handlers for zpool components, there are several variants, wwn-, pci-, scsi-, ata-, but they all map to the real /dev drive IDs. Failure to unmap these led to failing to match components and get size info etc for zfs. 5. See DOCUMENTATION: 2, language changes for weather feature abuse. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going along with the rpm issues, added dnf.conf support to yum/dnf repo types. Not sure how that one was missed, but there it is. This should tighten repo reports for dnf/yum/zypp types. 2. Added LeftWM. LeftWM confirmed working. Added unverifed detections for: penrose, 2bwm, 5dwm, catwm, mcwm, monsterwm, snapwm, uwm, wingo, wmfs, wmfs2. 3. Added xfwm as a compositor type, that had bee left out, somewhat on purpose, since xfwm can run in compositing or non compositing mode. But should show since many users use compositing mode now. 4. Added OpenMediaVault distro ID and systembase handlers. 5. Going along with zfs bug fix 3, using zfs list data for free, size, allocated. Trying to understand how zfs developers actually thought about this is nearly impossible so just used what seems to correspond to reality most. Also shows raw values for zfs data in RAID along with regular ones to make clear which is which value. 6. Added more CPU architecture ID matches for AMD Zen and a variety of Intel. Both vendors finally released some new CPUs and the data became available, which doesn't always happen quickly. 7. A bunch of new disk vendors and vendor IDs added. Never stops, like the sands of time, like the ocean waves, like the scuttling crabs scrounding around in the seaweed in the foam where the outgoing wave left its mark... -------------------------------------------------------------------------------- DOCUMENTATION: 1. Added leftwm keybindinigs to inxi-data.txt desktop/wm section. Updated more wm in that section as well, and list more info on wms for future reference etc. Also reorganized and more more readable wm section. 2. Help/Man now make more clear that automated requests or excessive use of the inxi weather feature are not under any circumstance permitted. There had been some ambiguity and lack of clarity about what abuse is, now it should be more clear. -------------------------------------------------------------------------------- CODE CHANGES: 1. Refactored uptime parser logic, the code and regex was just getting too messy and difficult to work with and debug, now it works similar to how the revised BSD parsers run, the regex are pulled apart and made more granular so a small syntax change ideally won't break the detections as easily. 2. Cleaned up sub cpu_arch() and made all the arch values line up nicely, over time I notice that almost invariably stuff done to save lines of code makes code harder to read as the feature expands, so it's generally worth just unravelling it so it all stacks and is easy to scan/read. Also removed extra white space in parens, which is something I'm leaning more towards but it's not worth fixing all at once so it's just done where it's noticed. That's using: if ( /test/ ){ rather than: if (/test){ I believe using more white space helped with Perl comprehension in the intermediate stages, but is not required anymore and just looks like extra whitespace now.
2021-07-12 02:32:13 +00:00
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBusb-sys\fR \- Forces the USB data generator to use \fB/sys\fR as data
source instead of \fBlsusb\fR (Linux only).
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
\- \fBvmstat\fR \- Forces use of vmstat for memory data.
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
\- \fBwayland\fR \- Forces use of Wayland, disables x tools glxinfo, xrandr,
xdpyinfo.
\- \fBwmctrl\fR \- Force \fBSystem\fR item \fBwm\fR to use \fBwmctrl\fR as data
source, override default \fBps\fR source.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
.TP
.B \-\-hddtemp\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Shortcut. See \fB\-\-force hddtemp\fR.
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
.TP
.B \-\-html\-wan\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Temporary override of \fBNO_HTML_WAN\fR configuration item. Only use to test
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
w/wo HTML downloaders for WAN IP. Restores default behavior for WAN IP, which is
use HTML downloader if present and if dig failed.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
.B \-\-man\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Updates / installs man page with \fB\-U\fR if \fBpinxi\fR or using \fB\-U 3\fR
dev branch. (Only active if \fB\-U\fR is is not disabled by maintainers).
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-\-no\-dig\fR
Overrides default use of \fBdig\fR to get WAN IP address. Allows use of normal
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
downloader tool to get IP addresses. Only use if dig is failing, since dig is
much faster and more reliable in general than other methods.
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
.TP
.B \-\-no\-doas\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Skips the use of doas to run certain internal features (like \fBhddtemp\fR,
\fBfile\fR) with doas. Not related to running inxi itself with doas/sudo or
super user. Some systems will register errors which will then trigger admin
emails in such cases, so if you want to disable regular user use of doas
(which requires configuration to setup anyway for these options) just use
this option, or \fBNO_DOAS\fR configuration item. See \fB\-\-no\-sudo\fR if
you need to disable both types.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
.TP
.B \-\-no\-html-wan\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Overrides use of HTML downloaders to get WAN IP address. Use either only dig,
or do not get wan IP. Only use if dig is failing, and the HTML downloaders are
taking too long, or are hanging or failing.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Make permanent with \fBNO_HTML_WAN='true'\fR
New version, new man. Bug fixes, feature tweaks. Bugs fixed: 1. json/xml outputter had a bug in it that made it validate path wrong. 2. -G -xx option: compositor: for gnome-shell had a bug that would make it show as running when it wasn't, other strings were tripping the match on systems with gnome-shell installed but not running, 3. Finally fixed bug with manjaro full version distro string, and tweaked output to show Manjaro Linux instead of given string. Features added: 1. --no-man - this lets users turn off man installs. Only really useful for -U from master, since default is off for pinxi and dev 3 branch. Man page/help updated to add this option.
2018-03-26 01:42:49 +00:00
.TP
.B \-\-no\-man\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Disables man page install with \fB\-U\fR for master and active development
branches. (Only active if \fB\-U\fR is is not disabled by maintainers).
New version, new man. Bug fixes, feature tweaks. Bugs fixed: 1. json/xml outputter had a bug in it that made it validate path wrong. 2. -G -xx option: compositor: for gnome-shell had a bug that would make it show as running when it wasn't, other strings were tripping the match on systems with gnome-shell installed but not running, 3. Finally fixed bug with manjaro full version distro string, and tweaked output to show Manjaro Linux instead of given string. Features added: 1. --no-man - this lets users turn off man installs. Only really useful for -U from master, since default is off for pinxi and dev 3 branch. Man page/help updated to add this option.
2018-03-26 01:42:49 +00:00
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
.TP
.B \-\-no\-sensor\-force\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Overrides user set \fBSENSOR_FORCE\fR configuration value. Restores default
behavior.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
.B \-\-no\-ssl\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Skip SSL certificate checks for all downloader actions (\fB\-U\fR, \fB\-w\fR,
\fB\-W\fR, \fB\-i\fR). Use if your system does not have current SSL certificate
lists, or if you have problems making a connection for any reason. Works with
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
\fBWget\fR, \fBCurl\fR, \fBPerl HTTP::Tiny\fR and \fBFetch\fR.
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
New version, man page, exciting changes!! Bugs: 1. issue #200 - forgot to add all variants for -p, now works with --partition-full and --partitions-full 2. issue #199 - another one, forgot to add --disk to -D for long version. Thanks adrian15 for both of these, he was testing something and discovered these were missing. 3. Issue #187 an issue with RAID syntax not being handled in a certain case, thanks EnochTheWise for following through on this one. This turned out to be a bad copy paste, a test pattern did not match the match pattern. Fixes: 1. Fixed some docs typos. 2. Issue #188 fixed protections and filters for some glxinfo output handlers. 3. Issue #195, for Elbrus bit detection. 4. Added filter to cpu data, was not skipping if arm, so Model string was treated numerically. Enhancements: 1. Added rescatux to Debian system base detections. This closes issue #202, again from adrian15, thanks. 2. For cpu architecture, updated for latest AMD ryzen and other families, like Zen 3, which is just coming out re available data. Also latest Intel, which are trickier to ID right now, but I think I got the latest ones right, That's things like coffee lake, amber lake, comet lake, etc. 3. Huge one, full (hopefully out of the box) Russian Elbrus CPU support. Thanks to the alt-linux and the others who helped provide data and feedback to get support. Note that this was also part of correcting 64 bit detection for e2k type, which is how Elbrus IDs internally. See issue #197 which I've left open for the time being for more information on this CPU and how it's now handled by inxi. Note all available data should now work for Elbrus, including physical cpu/core counts etc. Elbrus do not show flag information, nor do they use min/max speed, so that data isn't available, but everything else seems to work well. 4. Eternal disk vendors. Thanks linux lite hardware database, you continue to help make the disk vendor feature work by supplying every known vendor ever seen. 5. To close debian bug report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=942194 Note that the fix is simply to give the user the option to disable this behavior with the new --no-sudo and NO_SUDO configuration file options. This issue should never have been filed as a bug since even the poster admitted it was a wishlist item, but because of how debian bug tracker works, it's hard to get rid of invalid bugs. Note that this is the internal use of sudo for hddtemp and file, not starting inxi with sudo, so using this option or configuration item just removes sudo from the command. Note that because the user did not do as requested, and never actually filed a github wishlist issue, and since his request was vague and basically pointless, the fix is just to let you switch off sudo, that's all.
2019-11-20 04:42:21 +00:00
.TP
.B \-\-no\-sudo\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Skips the use of sudo to run certain internal features (like \fBhddtemp\fR,
\fBfile\fR) with sudo. Not related to running inxi itself with sudo or
superuser. Some systems will register errors which will then trigger admin
emails in such cases, so if you want to disable regular user use of sudo (which
requires configuration to setup anyway for these options) just use this option,
or \fBNO_SUDO\fR configuration item.
New version, man page, exciting changes!! Bugs: 1. issue #200 - forgot to add all variants for -p, now works with --partition-full and --partitions-full 2. issue #199 - another one, forgot to add --disk to -D for long version. Thanks adrian15 for both of these, he was testing something and discovered these were missing. 3. Issue #187 an issue with RAID syntax not being handled in a certain case, thanks EnochTheWise for following through on this one. This turned out to be a bad copy paste, a test pattern did not match the match pattern. Fixes: 1. Fixed some docs typos. 2. Issue #188 fixed protections and filters for some glxinfo output handlers. 3. Issue #195, for Elbrus bit detection. 4. Added filter to cpu data, was not skipping if arm, so Model string was treated numerically. Enhancements: 1. Added rescatux to Debian system base detections. This closes issue #202, again from adrian15, thanks. 2. For cpu architecture, updated for latest AMD ryzen and other families, like Zen 3, which is just coming out re available data. Also latest Intel, which are trickier to ID right now, but I think I got the latest ones right, That's things like coffee lake, amber lake, comet lake, etc. 3. Huge one, full (hopefully out of the box) Russian Elbrus CPU support. Thanks to the alt-linux and the others who helped provide data and feedback to get support. Note that this was also part of correcting 64 bit detection for e2k type, which is how Elbrus IDs internally. See issue #197 which I've left open for the time being for more information on this CPU and how it's now handled by inxi. Note all available data should now work for Elbrus, including physical cpu/core counts etc. Elbrus do not show flag information, nor do they use min/max speed, so that data isn't available, but everything else seems to work well. 4. Eternal disk vendors. Thanks linux lite hardware database, you continue to help make the disk vendor feature work by supplying every known vendor ever seen. 5. To close debian bug report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=942194 Note that the fix is simply to give the user the option to disable this behavior with the new --no-sudo and NO_SUDO configuration file options. This issue should never have been filed as a bug since even the poster admitted it was a wishlist item, but because of how debian bug tracker works, it's hard to get rid of invalid bugs. Note that this is the internal use of sudo for hddtemp and file, not starting inxi with sudo, so using this option or configuration item just removes sudo from the command. Note that because the user did not do as requested, and never actually filed a github wishlist issue, and since his request was vague and basically pointless, the fix is just to let you switch off sudo, that's all.
2019-11-20 04:42:21 +00:00
Many small updates, enhancements, bug fixes!!! We've been saving them up!! Here they are!! Don't wait!! Thanks mr. mazda for many issue finds, and suggestions. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. Due to unfixable rpm slowdowns, removed package counts for default output for rpm based systems. We were seeing delays of up to 30+ seconds just to list the rpm package count, which is absurd, even after the rpm optimizations inxi already runs. To allow rpm users to get excluded by default for rpm package list counts, added --pkg flag plus a short message telling them to use that flag to get the installed package count if they want it. Changes like this are very unfortunate, but in 2021 for a package manager at times to require over 30 seconds to generate a trivial installed package list is just not acceptable. One of the reasons this release was delayed was this was not an easy decision to make, it's very rare support for a feature is removed for specific tools due to how badly the tools may perform. Note that whatever higher level tool is used, like dnf, zypp, it's still the same speed, they all appear to use the same core engine. Basically this decision was forced since either inxi looks really bad and slow, when it's not, or the actual cause was removed from default outputs. -------------------------------------------------------------------------------- BUGS: 1. Small bug in nfs blacklist for disk used led to nfs used being added, which leads to silly used percents. This is corrected. 2. If ram vendor ID failed, inxi would delete the part number. Oops. This was related to the Mushkin failures. 3. Close to a bug, though not one internally, but to users would appear as one: ZFS does not act as expected, zpool list did not in fact return the pool size, which I had always assumed to be the case, but in a very strange decision, does return something very close to the pool size for mirrors, but NOT for z1 or z2 pools, then it returns the total size of the drives that make up the pool. To call this strange behavior would be an understatement. The fix was to modify the logic to use zfs list instead to get the size data. This also makes the drive total report far more accurate, since it lists usable space now for ZFS as was always intended. The cause of this was simply that I'd always had access to zfs mirrors, not z1 or z2 arrays. -------------------------------------------------------------------------------- FIXES: 1. OpenSuse and maybe others use kdm3 for Trinity, not kdm, so dm was failing. 2. Going along with fix 1, made kde version detection more robust so may catch more fringe / corner cases for kde desktops. These were mainly added to correct Trinity desktop version detections. 3. Mushkin ram vendor ID was failing, that is or should be corrected. 4. Added in /dev/disk/by-id handlers for zpool components, there are several variants, wwn-, pci-, scsi-, ata-, but they all map to the real /dev drive IDs. Failure to unmap these led to failing to match components and get size info etc for zfs. 5. See DOCUMENTATION: 2, language changes for weather feature abuse. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going along with the rpm issues, added dnf.conf support to yum/dnf repo types. Not sure how that one was missed, but there it is. This should tighten repo reports for dnf/yum/zypp types. 2. Added LeftWM. LeftWM confirmed working. Added unverifed detections for: penrose, 2bwm, 5dwm, catwm, mcwm, monsterwm, snapwm, uwm, wingo, wmfs, wmfs2. 3. Added xfwm as a compositor type, that had bee left out, somewhat on purpose, since xfwm can run in compositing or non compositing mode. But should show since many users use compositing mode now. 4. Added OpenMediaVault distro ID and systembase handlers. 5. Going along with zfs bug fix 3, using zfs list data for free, size, allocated. Trying to understand how zfs developers actually thought about this is nearly impossible so just used what seems to correspond to reality most. Also shows raw values for zfs data in RAID along with regular ones to make clear which is which value. 6. Added more CPU architecture ID matches for AMD Zen and a variety of Intel. Both vendors finally released some new CPUs and the data became available, which doesn't always happen quickly. 7. A bunch of new disk vendors and vendor IDs added. Never stops, like the sands of time, like the ocean waves, like the scuttling crabs scrounding around in the seaweed in the foam where the outgoing wave left its mark... -------------------------------------------------------------------------------- DOCUMENTATION: 1. Added leftwm keybindinigs to inxi-data.txt desktop/wm section. Updated more wm in that section as well, and list more info on wms for future reference etc. Also reorganized and more more readable wm section. 2. Help/Man now make more clear that automated requests or excessive use of the inxi weather feature are not under any circumstance permitted. There had been some ambiguity and lack of clarity about what abuse is, now it should be more clear. -------------------------------------------------------------------------------- CODE CHANGES: 1. Refactored uptime parser logic, the code and regex was just getting too messy and difficult to work with and debug, now it works similar to how the revised BSD parsers run, the regex are pulled apart and made more granular so a small syntax change ideally won't break the detections as easily. 2. Cleaned up sub cpu_arch() and made all the arch values line up nicely, over time I notice that almost invariably stuff done to save lines of code makes code harder to read as the feature expands, so it's generally worth just unravelling it so it all stacks and is easy to scan/read. Also removed extra white space in parens, which is something I'm leaning more towards but it's not worth fixing all at once so it's just done where it's noticed. That's using: if ( /test/ ){ rather than: if (/test){ I believe using more white space helped with Perl comprehension in the intermediate stages, but is not required anymore and just looks like extra whitespace now.
2021-07-12 02:32:13 +00:00
.TP
.B \-\-pkg\fR
Shortcut. See \fB\-\-force pkg\fR.
New version, new man, new feature!! Bug fixes! Bugs: 1. issue #182 - in freebsd, there was an oversight in the pciconf parser, it was using unfiltered strings as regex pattern, and of course, a string flipped an error. Fix was to add the regex cleaner to the string before it's used in test. 2. NOTE: issue #182 had a second bug, but the issue poster didn't follow up with data or output so it couldn't be fixed. This was related to a syntax change in usbdevs -v output in FreeBSD. Such changes are too common, but it might also simply be a variant I have not seen or handled, but so far no data, so can't fix. Don't blame me if you get this bug, but do post requested debugger data if you want it fixed! Fixes: 1. Updated man for weather, explained more clearly how to use country codes for weather output. More clarifying in general about weather location, and weather restrictions. Enhancements: 1. Added avx/avx2 to default flag list in -C short form. Thanks damentz from liquorix for clarifying why that was a good idea. Note the initial issue came up in a Debian issue report, not here. People!! please post issues here, and don't bug maintainers with feature requests! Maintainers aren't in a position to add a feature, so you should go straight to the source. 1.a. Created in inxi-perl/docs new doc file: cpu-flags.txt, which explains all the flags, and also covers the short form flags and explains why they are used. 2. To resolve another issue, I made a new documentation file: inxi-perl/docs/inxi-custom-recommends.txt This is instructions for maintainers of distros who do not use rpm/apt/pacman but still want the --recommends feature to output their package pool package names for missing packages. I decided to not allow more than the default 3 package managers because no matter what people say, if I allow in more, the maintainer will vanish or lose interest, and I'll be stuck having to maintain their package lists forever. Also, it's silly to even include that package list for any distro that does not use rpm/apt/pacman, since the list is just wasted lines. Instructions in doc file show what to change, and how, and has an example to make it clear. Odds of this actually being used? Not high, lol, but that's fine, if people want it done, they can do it, if not, nothing bad happens, it just won't show any suggested install package, no big deal. 3. Using the new disk vendor method, added even more disk vendors. Thanks linux litet hardware database!! 4. EXCITING!! A new --admin/-a option, suggested by a user on techpatterns.com/forums/ Now -S or -b or -F with -a option for GNU/Linux shows the kernel boot parameters, from /proc/cmdline. Didn't find anything comparable for BSDs, if you can tell me where to look, I'll add it for those too, but wasn't anywhere I looked. Do the BSDs even use that method? Don't know, but the logic is there, waiting to be used if someone shows me how to get it cleanly. The 'parameters:' item shows in the main 'System:' -S output, and will just show the entire kernel parameters used to boot. This could be very helpful to distros who often have to determine if for example graphics blacklists are correctly applied for non free drivers, like nomodeset etc, or if the opposite is present. For forum/distro support, they just have to ask for: inxi -ba and they will see t the relevant graphics info, for instance, or -SGaxxx, or -Faxxx, whatever is used to trigger in this case the graphics and system lines. 5. Updated man/help for 4 as well, now explains what they will see with --admin/ -a options and -S. Good user suggestion, I wish all new features were this easy, heh.
2019-05-01 00:56:10 +00:00
.TP
.B \-\-pm\-type [package manager name]\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
For distro package maintainers only, and only for non apt, rpm, or pacman
based systems. To be used to test replacement package lists for recommends
for that package manager.
New version, new man, new feature!! Bug fixes! Bugs: 1. issue #182 - in freebsd, there was an oversight in the pciconf parser, it was using unfiltered strings as regex pattern, and of course, a string flipped an error. Fix was to add the regex cleaner to the string before it's used in test. 2. NOTE: issue #182 had a second bug, but the issue poster didn't follow up with data or output so it couldn't be fixed. This was related to a syntax change in usbdevs -v output in FreeBSD. Such changes are too common, but it might also simply be a variant I have not seen or handled, but so far no data, so can't fix. Don't blame me if you get this bug, but do post requested debugger data if you want it fixed! Fixes: 1. Updated man for weather, explained more clearly how to use country codes for weather output. More clarifying in general about weather location, and weather restrictions. Enhancements: 1. Added avx/avx2 to default flag list in -C short form. Thanks damentz from liquorix for clarifying why that was a good idea. Note the initial issue came up in a Debian issue report, not here. People!! please post issues here, and don't bug maintainers with feature requests! Maintainers aren't in a position to add a feature, so you should go straight to the source. 1.a. Created in inxi-perl/docs new doc file: cpu-flags.txt, which explains all the flags, and also covers the short form flags and explains why they are used. 2. To resolve another issue, I made a new documentation file: inxi-perl/docs/inxi-custom-recommends.txt This is instructions for maintainers of distros who do not use rpm/apt/pacman but still want the --recommends feature to output their package pool package names for missing packages. I decided to not allow more than the default 3 package managers because no matter what people say, if I allow in more, the maintainer will vanish or lose interest, and I'll be stuck having to maintain their package lists forever. Also, it's silly to even include that package list for any distro that does not use rpm/apt/pacman, since the list is just wasted lines. Instructions in doc file show what to change, and how, and has an example to make it clear. Odds of this actually being used? Not high, lol, but that's fine, if people want it done, they can do it, if not, nothing bad happens, it just won't show any suggested install package, no big deal. 3. Using the new disk vendor method, added even more disk vendors. Thanks linux litet hardware database!! 4. EXCITING!! A new --admin/-a option, suggested by a user on techpatterns.com/forums/ Now -S or -b or -F with -a option for GNU/Linux shows the kernel boot parameters, from /proc/cmdline. Didn't find anything comparable for BSDs, if you can tell me where to look, I'll add it for those too, but wasn't anywhere I looked. Do the BSDs even use that method? Don't know, but the logic is there, waiting to be used if someone shows me how to get it cleanly. The 'parameters:' item shows in the main 'System:' -S output, and will just show the entire kernel parameters used to boot. This could be very helpful to distros who often have to determine if for example graphics blacklists are correctly applied for non free drivers, like nomodeset etc, or if the opposite is present. For forum/distro support, they just have to ask for: inxi -ba and they will see t the relevant graphics info, for instance, or -SGaxxx, or -Faxxx, whatever is used to trigger in this case the graphics and system lines. 5. Updated man/help for 4 as well, now explains what they will see with --admin/ -a options and -S. Good user suggestion, I wish all new features were this easy, heh.
2019-05-01 00:56:10 +00:00
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
.TP
.B \-\-sensors\-default\fR
Overrides configuration values \fBSENSORS_USE\fR or \fBSENSORS_EXCLUDE\fR
on a one time basis.
.TP
.B \-\-sensors\-exclude\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Similar to \fB\-\-sensors\-use\fR except removes listed sensors from sensor
data. Make permanent with \fBSENSORS_EXCLUDE\fR configuration item. Note that
gpu, network, disk, and other specific device monitor chips are excluded by
default.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Example: \fBinxi \-sxx \-\-sensors\-exclude k10temp-pci-00c3\fR
.TP
.B \-\-sensors\-use\fR
redid patches, I think
2021-08-25 03:39:33 +00:00
Use only the (comma separated) sensor arrays for \fB\-s\fR output. Make
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
permanent with \fBSENSORS_USE\fR configuration item. Sensor array ID value
must be the exact value shown in lm\-sensors sensors output (Linux/lm-sensors
only). If you only want to exclude one (or more) sensors from the output,
redid patches, I think
2021-08-25 03:39:33 +00:00
use \fB\-\-sensors\-exclude\fR.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Can be useful if the default sensor data used by inxi is not from the right
sensor array. Note that all other sensor data will be removed, which may lead
to undesired consequences. Please be aware that this can lead to many
undesirable side\-effects, since default behavior is to use all the sensors
arrays and select which values to use from them following a set sequence of
rules. So if you force one to be used, you may lose data that was used from
another one.
Most likely best use is when one (or two) of the sensor arrays has all the
sensor data you want, and you just want to make sure inxi doesn't use data
redid patches, I think
2021-08-25 03:39:33 +00:00
from another array that has inaccurate or misleading data.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Note that gpu, network, disk, and other specific device monitor chips are
excluded by default, and should not be added since they do not provide cpu,
board, system, etc, sensor data.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Example: \fBinxi \-sxx \-\-sensors\-use nct6791-isa-0290,k10temp-pci-00c3\fR
Small glitch on man page, that's fixed.
2017-11-29 01:28:28 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-sleep [0\-x.x]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Usually in decimals. Change CPU sleep time for \fB\-C\fR (current: \fB\0.35\fR).
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Sleep is used to let the system catch up and show a more accurate CPU use.
Example:
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fBinxi \-Cxxx \-\-sleep 0.15\fR
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Overrides default internal value and user configuration value:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBCPU_SLEEP=0.25\fR
New version, new man. Fixes, enhancements. Bugs: 1. ARM fix, odroid > 1 cpu speeds not showing correctly. 2. Ansible start fixes. 3. Fringe Battery failures, see Pinebook. Fixes: 1. Removed null data message 'old system' since that's not always the case. 2. Added support for > 1 CPU speeds in systems with > 1 CPU. 3. Added is_numeric test for sudo version tests, that was tripping errors in rare cases. 4. Fine tuned terminal size setting to check that is int to correct the Ansible problem. 5. ARM Pinebook fixes, battery, cpu. This also fixes corner cases where the battery charge state is missing but it is a systme battery. Enhancments: 1. Added more disk ID matches/vendors. Thanks LinuxLite Hardware database!! 2. UKUI, ukwm, ukui-panel added to desktop data. 3. Added PopOS to system base. 4. Ansible/Chef user noted that inxi believes that it is running in IRC when started by Ansible / Chef (not sure about Chef but assuming it's the same). Added flag --tty flag to force inxi to believe it's running in shell no matter what starts it. Note that this fix is not confirmed because the person didn't confirm the fix. Annoying. 5. Added Ubuntu disco to ubuntu_id.
2018-11-30 05:23:15 +00:00
.TP
.B \-\-tty\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Forces internal IRC flag to off. Used in unhandled cases where the program
redid patches, I think
2021-08-25 03:39:33 +00:00
running inxi may not be seen as a shell/pty/tty, but it is not an IRC client.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Put \fB\-\-tty\fR first in option list to avoid unexpected errors. If you want
a specific output width, use the \fB\-\-width\fR option. If you want normal
redid patches, I think
2021-08-25 03:39:33 +00:00
color codes in the output, use the \fB\-c [color ID]\fR flag.
New version, new man page. Bugs: 1. Both a fix and a bug, in that inxi had an out of date list of Xorg drivers. This led to all the newer Intel devices failing to show their drivers in the Xorg driver lines, like i915, i965, and so on. Updated to full current list of Xorg drivers. This is not technically a bug since it's simply things that came into existence after that logic was last updated. But it looks like a bug. Fixes: 1. Issues #170 and #168 showed a problem with inxi believing it was running in IRC when Ansible or MOTD started inxi. This is because they are not tty so trip the non tty flag, which assumes it's in IRC in that case. The fix was to add a whitelist of known clients based on the parent name inxi discovers while running inside that parent. MOTD confirmed fixed, Ansible not confirmed. Why do people file issue reports then not follow them? Who knows. Note that this issue is easy to trip by simply doing this: echo 'fred' | inxi which disables the tty test as well. To handle that scenario, that is, when inxi is not first in the pipe, I added many known terminal client names to the whitelists. This works in my tests, though the possible terminals, or programs with embedded terminals, is quite large, but inxi handles most of them automatically. When it doesn't, file an issue and I'll add your client ID to the whitelist, and use --tty in the meantime. 2. Issue #171 by Vascom finally pinned down the wide character issue which manifests in some character sets, like greek or russian utf8. The fix was more of a work-around than a true fix, but inxi now simply checks the weather local time output for wide characters, and if detected, switches the local date/time format to iso standard, which is does not contain non ascii characters as far as I can tell. This seemed to fix the issue. 3. Added iso9660 from excluded file systems for partitions, not sure how inxi missed that one for so long. 4. See bug 1, expanded and made current supported intel drivers, and a few other drivers, so now inxi has all the supported xorg drivers again. Updated docs as well to indicate where to get that data. Enhancements: 1. As usual, more disk vendor/product ID matches, thanks to linuxlite hardware database, which never stops providing new or previously unseen disk ids. Latest favorite? Swissarmy knife maker victorinox Swissflash usb device. 2. Added Elive system base ID. 3. Added Nutyx CARDS repo type.
2019-01-01 05:11:01 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The sign you need to use this is extra numbers before the key/value pairs of
the output of your program. These are IRC, not TTY, color codes. Please post a
github issue if you find you need to use \fB\-\-tty\fR (including the full
\fB\-Ixxx\fR line) so we can figure out how to add your program to the list of
whitelisted programs.
New version, new man page. Bugs: 1. Both a fix and a bug, in that inxi had an out of date list of Xorg drivers. This led to all the newer Intel devices failing to show their drivers in the Xorg driver lines, like i915, i965, and so on. Updated to full current list of Xorg drivers. This is not technically a bug since it's simply things that came into existence after that logic was last updated. But it looks like a bug. Fixes: 1. Issues #170 and #168 showed a problem with inxi believing it was running in IRC when Ansible or MOTD started inxi. This is because they are not tty so trip the non tty flag, which assumes it's in IRC in that case. The fix was to add a whitelist of known clients based on the parent name inxi discovers while running inside that parent. MOTD confirmed fixed, Ansible not confirmed. Why do people file issue reports then not follow them? Who knows. Note that this issue is easy to trip by simply doing this: echo 'fred' | inxi which disables the tty test as well. To handle that scenario, that is, when inxi is not first in the pipe, I added many known terminal client names to the whitelists. This works in my tests, though the possible terminals, or programs with embedded terminals, is quite large, but inxi handles most of them automatically. When it doesn't, file an issue and I'll add your client ID to the whitelist, and use --tty in the meantime. 2. Issue #171 by Vascom finally pinned down the wide character issue which manifests in some character sets, like greek or russian utf8. The fix was more of a work-around than a true fix, but inxi now simply checks the weather local time output for wide characters, and if detected, switches the local date/time format to iso standard, which is does not contain non ascii characters as far as I can tell. This seemed to fix the issue. 3. Added iso9660 from excluded file systems for partitions, not sure how inxi missed that one for so long. 4. See bug 1, expanded and made current supported intel drivers, and a few other drivers, so now inxi has all the supported xorg drivers again. Updated docs as well to indicate where to get that data. Enhancements: 1. As usual, more disk vendor/product ID matches, thanks to linuxlite hardware database, which never stops providing new or previously unseen disk ids. Latest favorite? Swissarmy knife maker victorinox Swissflash usb device. 2. Added Elive system base ID. 3. Added Nutyx CARDS repo type.
2019-01-01 05:11:01 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
You can see what inxi believed started it in the \fB\-Ixxx\fR line,
\fBShell:\fR or \fBClient:\fR item. Please let us know what that result was
so we can add it to the parent start program whitelist.
New version, new man. Fixes, enhancements. Bugs: 1. ARM fix, odroid > 1 cpu speeds not showing correctly. 2. Ansible start fixes. 3. Fringe Battery failures, see Pinebook. Fixes: 1. Removed null data message 'old system' since that's not always the case. 2. Added support for > 1 CPU speeds in systems with > 1 CPU. 3. Added is_numeric test for sudo version tests, that was tripping errors in rare cases. 4. Fine tuned terminal size setting to check that is int to correct the Ansible problem. 5. ARM Pinebook fixes, battery, cpu. This also fixes corner cases where the battery charge state is missing but it is a systme battery. Enhancments: 1. Added more disk ID matches/vendors. Thanks LinuxLite Hardware database!! 2. UKUI, ukwm, ukui-panel added to desktop data. 3. Added PopOS to system base. 4. Ansible/Chef user noted that inxi believes that it is running in IRC when started by Ansible / Chef (not sure about Chef but assuming it's the same). Added flag --tty flag to force inxi to believe it's running in shell no matter what starts it. Note that this fix is not confirmed because the person didn't confirm the fix. Annoying. 5. Added Ubuntu disco to ubuntu_id.
2018-11-30 05:23:15 +00:00
Thanks manjaro user alven for finding a bunch of corner and not so corner case errors, glitches, documentation oversights, etc. This is a point release between the coming full CPU refactor and the current set of bug fixes and issue handlings. This release also contains the debuggers for the new CPU data logic, which are important to get this CPU refactor stable and reliable across old/new systems, different operating systems and platforms. Wanted to do this intermediate releaase to get the current fixes out, which make inxi overall better for CPU issues, but do not handle the core requirement to do a full refactor. -------------------------------------------------------------------------------- CORRECTION: 1. On release notes for 3.3.08: due to a long delay to get real debugger data from the person who had the issue, but finally getting it after the release of 3.3.08, there was NO bug in ps wwaux output. Something else was creating the linewraps, maybe the subshell, it's basically impossible to know since we never got a real debugger data set, which is the only real way to get the actual same data inxi will see. Was it a subshell wrapping the output? We just can't know, nor are we likely to ever find out. This highlights very well however why some issues are essentially impossible to ever fully resolve without the --debug 22 dataset. This bug/fix is definitely in that class of issues. It's never good to accuse another program of having a bug when it doesn't, so sorry to ps authors, no bug or issue exists for ps in this area. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. wiryonolau issue #259 points out that if --tty is used, default IRC filter rule is still active and on. Because his case appears to be from an autostart using Bash, which then gives up to find the parent at dash, which then makes inxi believe it's in an IRC shell client, that issue doesn't appear to be resolvable. -------------------------------------------------------------------------------- BUGS: 1. Documentation, help menu and man page showed wmctl instead of wmctrl, which for someone who reads the help man, leads to command --fake wmctl failing. Thanks manjaro user alven for finding this typo. 2. For dmidecode cpu data, had global total values for cache that could result in wrong output values, 2x or more wrong for L1 / L3 cache on linux. Difficulty is preserving that data for bsd, which in general do not show phys cpu counts, and thus make showing totals off. Created new '-total' item for each L cache type, which will handle > 1 cpus, and also can be used to determine if > 1 cpus present!. 3. Manjaro user pointed out that hub types were wrong, this is because inxi was using the INTERFACE ID values for hubs instead of the TYPE values. For all other device types, INTERFACE is correct, but for hubs, we needed TYPE, so fix is to detect INTERFACE 9/0/0 and if TYPE present for that, swap. -------------------------------------------------------------------------------- FIXES: 1. For > 1 cpu systems, with dmidecode sourced cpu cache data, can now determine physical cpu count based on comparing L2 and L2-total values. This means that when dmidecode is used on BSD for CPU data, inxi may now be able to deduce that it is a > 1 cpu system. 2. Forgot to set $run{'filter'} to 0 for whitelist start client detection. 3. Going along with bug 3, changed 'Full speed (or root) hub' to: Full speed or root hub, to make more clear that it's one or the other, or both. 4. For apply_filter(), added test if <superuser required> just return the string. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Going with bug 1, and fix 1, for > 1 cpu systems, will now show for all cache: items L1: 2x 1.5 MiB (3 MiB), same for L2 and L3. This is far less confusing than showing the totals without explaining what they are. 2. Going along with 1, now root is not required to show L1 and L3 -Cxx on Linux as long as the system is reasonably new, about after 2008, and has getconf -a supported. That support is came in somewhere around 2.10, not sure exactly when. Debian Etch had it, Sarge did not, Ubuntu 9.10 had it. Tinycore does not have getconf at all. This will probably be replaced by a more robust full cpu /sys data tool. 3. Added ht to default short -Cx flag list, that should show, and it's short. 4. Added --no-filter to activate -Z, --filter-override isn't consistent with other --no-xxx options, even I forgot it. No changes, just another way to use -Z. 5. For issue #260 added pch as a new sensor output type, it's kind of a builtin southbridge / northbridge in the CPU die, but it's not a core, and has a different temp. Will anyone even know what pch is? probably not, but who cares. -------------------------------------------------------------------------------- CHANGES: 1. No longer showing for > 1 physical cpu systems the sum total of L1/2/3 cache data. Now shows per cpu L1/L2/L3, and if > 1 cpu, shows for example: cache: L1: 2x 512 KiB (1024 KiB) L2: 2x 2 MiB (4 MiB) L3: 2x 20 MiB (40 MiB) For single physical cpu output remains the same: cache: L1: 576 KiB L2: 3 MiB L3: 16 MiB -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated help/man for L1/L3 cache -Cxx changes. 2. Updated man and help to suggest -Z for --tty. 3. Forgot to note -v 7 adds -f, added to man/help. -------------------------------------------------------------------------------- CODE: * Added 'getconf -a' to debugger, that may be usable for cpu cache data, need to gather data on that to confirm. that's regading issue #257 cache glitches. 2. Removed all * $physical_count for cache data in cpu_properties, that is now handled by creating string with cpu count, per cpu caches, and total in parens. 3. Added in fallback failure case for the ZFS file system issue exposed by accident in issue #258 - will now log in debugger the error, so we can try to find what is going on there, impossible to reproduce until we find what zfs or more likely, freebsd, changed there. Could be hyper specific, some weird thing like a person making a zfs device name with space, impossible to guess. Note that since the freebsd user declined to supply any data to help resolve this issue, then closed it, we're back where we usually end up with FreeBSD issues, either a Linux user (or worse, me) willing and able to find the issue and supply the debugger data required shows up, OR the issue is ignored as valid but impossible to resolve. RANT: Note that this also confirmed to me that in order to preserve my own sanity and not waste endless hours trying to get data, from now on, unless utterly trivial, if a FreeBSD user refuses to promptly supply the required data, the issue will be closed with a freebsd-closed-no-data-supplied label, which means, valid but not possible to solve due to user refusing to help me help them. Come on FreeBSD users!! If you want help, and inxi to support your distro, help me help you!! If not, then why are you even filing an issue in the first place? Do you expect faeries to spread magic bug / issue fixing faerie dust over inxi and then activate it with their little wands? This is growing tiresome to be honest because it's so utterly predictable. 4. Shuffled order of sensor type detections, there was a slim chance that a non gpu sensor type could have string intel in it, so put the gpu sensors second to last, before 'main'. 5. Started refactor of cpu core/cache logic. Added feature to cpu_arch, and changed it to cpu_info since now it gives by vendor/family/model/stepping both micorarch and cache/core math array returns. Also started refactor to make more predictable, with increased comments, about what is going on in cpu_properties to avoid breaking existing correct results. 6. Added to --debug /sys cpu data globber tool, that will help debugging the new /sys cpu data feature, will let me insert the file data directly into the logic. 7. Added CpuItem::cpu_data_sys() with debuggers, that will now start collecting user cpu data whenever the debugger is run, though it's not active yet. 8. Set $Data::Dumper::SortKeys = 1; dugh, could have saved big headaches if had found this before. Makes all keys sorted cleanly, gets rid of random hash sorts.
2021-11-22 20:47:54 +00:00
In some cases, you may want to also use \fB\-\-no\-filter\fR/\fB\-Z\fR option if
you want to see filtered values. Filtering is turned on by default if \fBinxi\fR
believes it is running in an IRC client.
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
.TP
.B \-\-usb\-sys\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Shortcut. See \fB\-\-force usb\-sys\fR
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
That damned Kate editor bug where it randomly sprays out characters that were in the desktop clipboard caused 3 random pastes of the characters 'failed' into the man page. Kate needs to get their damned crap in order!!! It's becoming unusable.
2021-01-14 01:32:13 +00:00
.TP
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
.B \-\-usb\-tool\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Shortcut. See \fB\-\-force lsusb\fR
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
.TP
.B \-\-wan\-ip\-url [URL]\fR
Force \fB\-i\fR to use supplied URL as WAN IP source. Overrides dig or
default IP source urls. URL must start with http[s] or ftp.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The IP address from the URL must be the last item on the last (non\-empty)
line of the page content source code.
That damned Kate editor bug where it randomly sprays out characters that were in the desktop clipboard caused 3 random pastes of the characters 'failed' into the man page. Kate needs to get their damned crap in order!!! It's becoming unusable.
2021-01-14 01:32:13 +00:00
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
Same as configuration value (example):
\fBWAN_IP_URL='https://mysite.com/ip.php'\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
.TP
.B \-\-wayland\fR, \fB\-\-wl\fR
Shortcut. See \fB\-\-force wayland\fR.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
.TP
.B \-\-wm\fR
Just as 3.3.10 > 3.3.11 were a huge set of CPU upgrades, including significant internal refactors, so too is 3.3.13 a significant Graphics upgrade, featuring significant upgrades to Wayland (and Xvesa/TinyX!) support, and allowing for much more granular output controls. The legacy -Ga showing Display/Screen/Monitors is now split apart, and can now work for some features in and out of display. This upgrade should be of significant interest to any Wayland using distro, as well as the tiny Xvesa based distros like TinyCore, Slitaz, and Puppy. -------------------------------------------------------------------------------- NOTE TO MAINTAINERS AND PACKAGERS: If you had Cpanel::JSON::XS or JSON::XS Perl modules as dependencies, you can remove those, inxi now can use JSON::PP, which is in Core Modules since Perl 5.14 (unless for some reason your distro removed that module from Core Modules). Basically inxi will simply look for whichever of the 3 is installed, and use that one. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. The free drivers for xorg like amdgpu, modesetting, alter the the internal kernel IDs for monitors/gfx device ports, which is somewhat bizarre since the ideal role of any ID is to be an identifier that always works. Due to this situation, inxi has to map the kernel ids to the x driver monitor IDs in order to show the advanced monitor data, like model: mapped: and modes:. This may not always work as expected since if the mapping fails, the data will fail to match to the monitors. While not enough data is in to make any conclusions, hoping that this issue does not exist on Wayland compositors. -------------------------------------------------------------------------------- BUGS: 1. Not sure if this was a bug, but I believe RAM vendor ID matches would never have generated results, and might have generated errors. That's corrected as part of Code fix 1. -------------------------------------------------------------------------------- FIXES: 1. Tiny indentation level issue, for -Ga, Monitor was not set to be a container for its data. This would only impact -y 1 or json and xml output cases, and would be subtle, but it was an oversight. 2. Small fix for monitor dimensions, failed to switch the mm dimensions for monitors placed in a vertical, portait mode, instead of standard landscape mode. Now switches mm x and y if that is detected, which corrects dpi as well. 3. For Xvesa: * Show vesa as display driver, Xvesa == vesa, dugh,lol. * Show better Interface and Screen resolution data missing messages. * See FIX 5 for adding in display-ID:. * Show TinX Xvesa string for server data, not just Xvesa. 4. For Wayland, which currently has no EGL support in inxi, if no glxinfo present, show EGL Wayland specific Messsage: for advanced EGL data, not the generic glxinfo that were shown previously. 5. Display was relying on xdpyinfo or a Wayland environmental variable to set display-ID:, now falls back always to $ENV{DISPLAY} if nothing else was found and that exists. I hadn't realized how much was depending on those x tools, which many people never had installed in the first place. This also supplies that for Xvesa as well, which has features that need the Display-ID to use. 6. Intel family 6, model 17h, supposed to be yorkfield, was penryn, fixed. 7. Small fix for remove_duplicates, it was not case insensitive so missed things like DELL Dell in strings. 8. Failed to detect or get Xfree86 X server version number. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Extensive Graphics Upgrades: * -Gxx Devices: For some gpus / drivers, show vram total and used for -Gxx. amdgpu supports this, I believe it's the only one, but don't know for sure. * -Gxx Devices: (Linux only): Show active, off (connected but disabled, like a closed laptop screen with attached moniitor), and empty ports on devices. Not tested for USB yet. * -Gxx Devices: Show device ports (like VGA-1, DVI-I-1, HDMI-A-1), active, off (off is connected but disabled) and empty (linux only). * -G Display/Screen: Removed strict dependency on xdpyinfo to show advanced xorg screen and display data. Now it will show most of the data if xrandr is available, and all if xrandr and xdpyinfo are installed. More granular error messages as well. * -G Wayland Display: new type, d-rect: for > 1 monitor Wayland display layouts. Works roughly the same as Screen: s-res: does, except since Wayland has no 'Screen' concept, that goes into Display. This is sort of a rough algo, basically it takes either the dimensions of the total of x and y resolutions, or the greatest x or y resolution found for any monitor, whichever is greater, and uses that to create the display rectangle resolution composite value. * -G Display, Monitors: Extended display tool options from just xrandr to swaymsg, wlr-xrandr, weston-info, wayland-info. Still nothing on kwin_wayland or gnome-shell and mutter data. *. -S, -G: compositors, full redo of list, now supported: asc awc cage cagebreak cardboard chameleonwm clayland comfc dwc dwl epd-wm fireplace feathers fenestra glass gamescope greenfield grefson hikari hopalong inaban japokwm kiwmi kwinft labwc laikawm lipstick liri mahogany marina maze motorcar newm nucleus orbital perceptia phoc pywm qtile river rustland simulavr skylight sommelier sway swc swvkc tabby taiwins tinybox tinywl trinkster velox vimway vivarium wavy waybox way-cooler wayfire wayhouse waymonad westeros westford weston wio+ wio wxrc wxrd xuake * -G Enhanced Interfaces/GL item, previously only type OpenGL forX, now has: * X - OpenGL, requires glxinfo , same as before. * Wayland - EGL, currently no tool available, stub in place. Allegedly this data can be found but have no idea how or if a tool does that yet * Xvesa - Interface: interface type (VBE/GOP). GOP not confirmed, no data samples; v:, source:, dac: (no idea what it is, show it though), controller:, and ram: items. This is based on TinyX/Xvesa as found in TinyCore, but should work in Slitaz and Puppy TinyX as well if those projects are still around. * -G Display/Screen/Monitor data: Created structures and abstractions that allow for Wayland/Xorg/Xvesa data, most new features will work with any of these. Or Arcan, if that actually makes it, and we get data for it. We'll wait on Arcan, heh. * -G Display server: For Xvesa, added type TinyX to server if detected. Added Xwayland, which was not handled previously. For Xwayland, if wayland running, and if Xorg also installed, shows: server: X.org v: 1.20.14 with: Xwayland v: 21.01 Otherwise shows: server: Xwayland v: 21.01 * -G Compositors: fixed a long standing weak spot, if > 1 compositor detected running, not common, but could happen, shows all detected compositors. Display: x11 server: X.Org v: 1.20.13 compositors: 1: Mutter v: 41.1 2: xfwm v: 4.16.1 driver: X: loaded: modesetting gpu: radeon * -G drivers: now shows if X or gpu driver, in each its own section. This makes it more obvious what is going on: Display: x11 server: X.Org v: 1.20.13 driver: X: loaded: modesetting gpu: radeon resolution: * -Gxx Monitors: Show primary monitor with pos: primary,right. Uses either xrandr 'primary' value, or if no 'primary' found in an Xorg Screen, uses +0+0 positioned monitor. Position is based on the row and column number in the rectangular grid of monitors when monitors per Xorg Screen are > 1. For most common multi-monitor layouts, text positions are used, which are in general more clear and easy to understand than their internal numeric counterparts, that is, unless the layout is too complicated, it will show left, or top-left, instead of 1-1, and so on. Text mode positions are available for the following grid styles currently: 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 3x3. 'top' means the top row if > 1 row, 'bottom' means the bottom row, 'middle' is the middle row if 3 rows, 'left' is the first column, 'right' the last, 'center' if 3 columns, and 'center-l' (1-2), 'center-r' (1-3) are the 2 center columns if 4 columns. 'bottom-l', 'bottom-c', 'bottom-r'; 'middle-l', 'middle-c', 'middle-r'; 'top-left', 'top-center', 'top-right' complete the possible values. If the grid of monitors is greater than the supported rows or columns, it will switch to numeric row-column mode, with column-row numbering starting at 1-1, top left. * -Gxx Monitors: show (if detected, Linux only) monitor model, and if the display ID (from Xorg or Wayland) is different from the /sys monitor ID, show mapped: to show the /sys id. * -Gxxx Monitors: show modes: max: XxY min: XxY, or mode: XxY (if only 1 mode found). Shows hz: * -Ga Monitors: shows serial, built year, gamma, ratio, if detected. 2. Added impish 21-10 and jammy 22-04 to ubuntu id. That's for Mint base ID. Not huge point in updating if Mint doesn't update inxi, but there it is. 3. For -Axx, -Exx, -Gxx, -Nxx, shows PCIe speed and lanes. With -a, shows max speed / lanes if different than current speeds/lanes. Note that for unknown reasons not all devices in a PCIe slot show this data. 4. -Ixx: terminals added: foot, ate 5. -Sxx: login/display managers added: emptty, greetd, qingy, tbsm. See CODE 5 for more info on how this change was done. 6. -Sxxx: status/dock/panel bars added: i3-status-rs, luastatus, nwg-bar, nwg-dock, nwg-panel, rootbar, sfwbar, wapanel, waybar, yambar 7. Added a Tyan board IPMI sensor data set. 8. Added support for fruid_print for Elbrus -M Machine data. Those boards don't have dmi tables, but do ship with Elbrus OS which has fruid_print. 9. More disk vendors! Yes, you know the drill, the world turns, and with every turn, a flock of new vendors appears, like baby rabbits emerging from their warren, endlessly, a stream that is the life essence itself... or something. -------------------------------------------------------------------------------- CHANGES: 1. When xdpyinfo is not installed, user will still see advanced -Ga Monitor and Screen data as long as xrandr at least is installed. Better error messages as well now to explain which tool or tools missing caused the missing data. 2. -Gxx will show basic Screen and Monitors, id, mapped, pos:, model, res, dpi, diag; -Gxxx adds Monitor modes; --Ga adds screen/monitor size, Screen diag. 3. -ba/-v2 no longer show the full screens/monitor report, now it remains basic mode output, which it should have always done, unless -G is also explicitly added. 4. Split apart x-server version to v:, which should always have been the case. 5. Xvesa and Wayland no longer show glxinfo messages for no glxinfo for GL data. Now they show their own custom messages, appropriate to the case. 6. json features now test for JSON::PP, JSON::XS, or Cpanel::JSON::XS modules, and use whichever is found. Note I did not realize JSON::PP was in core modules as of 5.14 so that makes sense to use, and will allow inxi to start using json data sources, which are a lot easier to parse. 7. Changed -G drivers to show subsections for X and gpu drivers, and updated missing driver messages to account for this change. X drivers now show the sub sets of loaded/unloaded/failed/alternate, and gpu shows active gpu drivers, assuming such are detected. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Help and man page updates for -G Display/Screen/Monitor changes. Redid -G, -Gx, -Gxx, -Gxxx, -Ga. Added monitor layout position feature. 2. Updated -Ga for xrandr/xdpyinfo changes. 3. Updated --recommends to more accurately show function of xdpyinfo and xrandr for -G and -Ga. 4. Reorganized and added complete table of contents to docs/inxi-data.txt -------------------------------------------------------------------------------- CODE: 1. Slightly optimized use of array loads on disk_vendor() and ram_vendor() based on how it's now done for monitor layouts, which is more efficient, use a scalar to hold a reference to the array, that avoids having the array ever exist in more than 1 place. Part of the ongoing process of avoiding extra hash and array copies globally. 2. Moved to consistent undef behaviors. * For lists of variables use () to undefine, changed all of the the following: 1. (@a,$b,$c,%d) = (undef,undef,undef,undef); 2. (@a,$b,$c,%d) = (undef); 3. (@a,$b,$c,%d) = undef; to use: (@a,$b,$c,%d) = (); This undefines all the variables in the list. Note that assigning undef to @a in the first example creates an array of 1 key, with the value undef, and (@a,@b) = (undef,undef) creates arrays of 2 indexes, or something like that. Not what was wanted. Examples 2 and 3 assign undef to @a: an array of 1 index, value undef, and undefine the others variables in the list. This was not the desired behavior! * For most scalars, arrays, and hashes, use: undef @a; undef $s; undef %h. * For some hash and array index values, use $h{a} = undef. These cases may want the key itself to exist, with the value of undef, though I believe: undef $h{a}; is synonymous, but still have to verify that. I did some testing, and realized that some of the undef I had used in the various previous ways of using undef were not actually resulting in the expected behaviors. 3. Refactored display_data_x into 3 functions, added display_data_xdpyinfo and display_data_xrandr, which allows for more granular handling of those dependencies, now inxi can show most advanced display data with only xrandr installed. 4. Significantly improved all error handling and missing data for Wayland/Xorg. 5. Refactored get_display_manager() to better handle corner case dm file or directory names, and to avoid endless loops. Much cleaner now. Required because greetd had varying file names, greetd.run, or just greet-546.sock. With some other dm's that use similar, or unreadable directories in /run, now just doing a glob of /run/ /var/run, /var/run/rc.d as detected and checking for the dms in the names, then just using the dms that were found. Simpler. 6. Massively simplified and integrated compositor logic in Graphics, now using program_values() and program_data() as appropriate, and simple matching list to ps_gui data to get detected compositor[s], much simpler, far more efficient code, less to maintain. Also fixed long-standing weak spot of exiting on first detected compositor, now shows all detected, with version etc for each if available. 7. With 6. also significantly simplified and optimized get_ps_de_data() for desktop data, that's the ps aux fallback case for wm desktop detections. 8. Made $wl compositors list global to avoid having to update each section, that's now used in -G compositor, -S desktop/wm, and wm sections. It is set in ps_gui() on initial load. 7. Settled on one and only way to do multiline conditionals, now use no space, use same indent level as starting if/elsif etc. I've been debating this one, but can't find any real way to handle that elegantly so I think best to just not try, and leave it up the code flow to show when it's wrapped condition tests. 8. Refactored previous gl_output, expanded it to handle all interface types, OpenGL, EGL (not currently active due to no known tool to get EGL data for Wayland, and Interface: VBE type data for Xvesa. This roughly completed the breaking apart of the X.org centric logic for Display, Monitors, and GL data, and make all sections now fully agnostic to display server or protocol type. Should new display servers appear, it will now be far more simple to add support for them, since they would just plug into the existing abstraction layers. 9. Added --debug-arg to allow for passing specific custom args to the debugger. 10. Refactored display_server version, now works much better, creates lists of server/version, and xwayland as well if found.
2022-02-22 23:58:37 +00:00
Shortcut. See \fB\-\-force wmctl\fR.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH DEBUGGING OPTIONS
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
.TP
.B \-\-dbg 1\fR
\- Debug downloader failures. Turns off silent/quiet mode for curl, wget, and
fetch. Shows more downloader action information. Shows some more information
for Perl downloader.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
.TP
.B \-\-dbg [2\-xx]\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- See github \fBinxi-perl/docs/inxi-values.txt\fR for specific specialized
debugging options.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug [1\-3]\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\- On screen debugger output.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 10\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Basic logging. Check \fB$XDG_DATA_HOME/inxi/inxi.log\fR or
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\fB$HOME/.local/share/inxi/inxi.log\fR or \fB$HOME/.inxi/inxi.log\fR.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 11\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Full file/system info logging.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 20\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Creates a tar.gz file of system data and collects the inxi output
in a file.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
* tree traversal data file(s) read from \fB/proc\fR and \fB/sys\fR, and
other system data.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
* xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc.
* data from dev, disks, partitions, etc.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 21\fR
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Automatically uploads debugger data tar.gz file to \fIftp.smxi.org\fR,
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
then removes the debug data directory, but leaves the debug tar.gz file.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
See \fB\-\-ftp\fR for uploading to alternate locations.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 22\fR
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Automatically uploads debugger data tar.gz file to \fIftp.smxi.org\fR, then
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
removes the debug data directory and the tar.gz file.
See \fB\-\-ftp\fR for uploading to alternate locations.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-ftp [ftp.yoursite.com/incoming]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
For alternate ftp upload locations: Example:
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fBinxi \-\-ftp \fIftp.yourserver.com/incoming\fB \-\-debug 21\fR
New version, new man. Bugs: 1. If you consider failure to identify a mounted yet hidden partition a bug, then that bug is fixed, but I consider that as more of a fix than a bug. Fixes: 1. Added more device pattern ID for odroid C1 and C2, these are now pretty well supported. 2. inxi failed to handle a certain type of hidden partition, so far only seen with udiskctl mounted TimeShift partitions, but this may be a more general udisk issue, but so far not enough information. The fix is to use the lsblk data to build up missing partitions, so this fix is for non legacy Linux systems only. The fix works pretty well, but it's hard to know until we get a lot more real world data, but given so far I've received only one issue report on it, I suspect this is not a common situation, but you never know, it would never have shown up in datasets unless I had looked specifically for it, so it may be more common than I think. 3. Cleaned up and simplified new --admin -p and -d logic. Enhancements: 1. For debugging, renamed all user debugger switches to have prefix --debug. These options are to help debug debugger failures, and so far have been tested and solved the failures, so I'm adding them all to the main man and help menu, thus raising them to the level of supported tools. These were enormously helpful in solving proc or sys debugger hangs. * --debug-proc * --debug-proc-print * --debug-no-sys * --debug-sys * --debug-sys-print 2. Added findmnt output to debugger, that may be useful in the future. Also added df -kTPa to also catch hidden partitions in debugger. 3. Added in another user level debugger, triggered with --debug-test-1 flag. This will do whatever operation is needed at the time for that user. Some issues can only be resolved by the user on their machine. 4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
2018-09-28 21:25:17 +00:00
.SH DEBUGGING OPTIONS TO DEBUG DEBUGGER FAILURES
Huge upgrade, major rewrite/refactor, new features, everything is polished!!! Note that due to large number of internal changes to code, a separate INTERNAL CODE CHANGES section is at the bottom. Those are changes which in general do not impact what users see that much, but which definitely impact working on and with inxi! They also make errors less likely, and removed many possible bad data error situations. BUGS: 1. Obscure, but very old Tyan Mobo used a form of dmidecode data for RAM that I'd never gotten a dataset for before, this tripped a series of errors in inxi, which were actually caused by small errors and failures to check certain things, as well as simply never assigning data in corner cases. This system used only dmi handles 6 and 7, which is a very rare setup, from the very early days of dmi data being settled, but it was valid data, and actually inxi was supposed to support it, because I'd never gotten a dataset containing such legacy hardware data, the support didn't work. There were actually several bugs discovered while tracking this down, all were corrected. 2. Going along with the cpu fixes below, there was a bug that if stepping was 0, stepping would not show. I had not realized stepping could be 0, so did a true/false test instead of a defined test, which makes 0 in perl always test as false. This is corrected. 3. While going through code, discovered that missing second argument to main::grabber would have made glabel tool (BSD I think mostly) always fail, without exception. That explains why bsd systems were never getting glabel data, heh. 4. Many null get_size tests would not have worked because they were testing for null array but ('','') was actually being returned, which is not a null array. The testing and results for get_size were quite random, now hey are all the same and consistent, and confirmed correct. 5. In unmounted devices, the match sent to @lsblk to get extended device data would never work with dm-xx type names, failed to translate them to their mapped name, which is what is used in lsblk matches, this is corrected. This could lead to failures to match fs of members of luks, raid, etc, particularly noticeable with complex logical device structures. This means the fallback filters against internal logic volume names, various file system type matches, would always fail. 6. A small host of further bugs found and fixed during the major refactor, but not all of them were noted, they were just fixed, sorry, those will be lost to history unless you compare with diffs the two versions, but that's thousands of lines, but there were more bugs fixed than listed above, just can't remember them all. FIXES: 1. There was some ambiguity about when inxi falls back to showing hardware graphics driver instead of xorg gfx driver when it can't find an xorg driver. That can happen for instance because of wayland, or because of obscure xorg drivers not yet supported. Now the message is very clear, it says the gfx software driver is n/a, and that it's showing the hardware gfx driver. 2. Big redo of cpu microarch, finally handled cases where same stepping/model ID has two micorarches listed, now that is shown clearly to users, like AMD Zen family 17, model 18, which can be either Zen or Zen+, so now it shows that ambiguity, and a comment: note: check, like it shows for ram report when it's not sure. Shows for instance: arch: Zen/Zen+ note: check in such cases, in other words, it tells users that the naming convention basically changed during the same hardware/die cycle. 3. There were some raid component errors in the unmounted tests which is supposed to test the raid components and remove them from the mounted list. Note that inxi now also tests better if something is a raid component, or an lvm component, or various other things, so unmounted will be right more often now, though it's still not perfect since there are still more unhandled logical storage components that will show as unmounted when tney are parts of logical volumes. Bit by bit!! 4. Part of a significant android fine tuning and fix series, for -P, android uses different default names for partitions, so none showed, now a subset of standard android partitions, like /System, /firmware, etc, shows. Android will never work well though because google keeps locking down key file read/search permissions in /sys and /proc. 5. More ARM device detections, that got tuned quite a bit and cleaned up, for instance, it was doing case sensitive checks, but found cases where the value is all upper case, so it was missing it. Now it does case sensitive device type searches. 6. One of the oldest glitches in inxi was the failure to take the size of the raid arrays versus the size totals of the raid array components led to Local Storage results that were uselessly wrong, being based on what is now called 'raw' disk totals, that's the raw physical total of all system disks. Now if raid is detected the old total: used:... is expanded to: total: raw:... usable:....used:, the usable being the actual disk space that can be used to store data. Also in the case of LVM systems, a further item is added, lvm-free: to report the unused but available volume group space, that is, space not currently taken by logical volumes. This can provide a useful overview of your system storage, and is much improved over the previous version, which was technically unable to solve that issue because the internal structures did not support it, now they do. LVM data requires sudo/ root unfortunately, so you will see different disk raw totals depending on if it's root or not if there is LVM RAID running. Sample: inxi -D Drives: Local Storage: total: raw: 340.19 GiB usable: 276.38 GiB lvm-free: 84.61 GiB used: 8.49 GiB (3.1%) lvm-free is non assigned volume group size, that is, size not assigned to a logical volume in the volume group, but available in the volume group. raw: is the total of all detected block devices, usable is how much of that can be used in file systems, that is, raid is > 1 devices, but those devices are not available for storage, only the total of the raid volume is. Note that if you are not using LVM, you will never see lvm-free:. 7. An anonymous user sent a dataset that contained a reasonable alternate syntax for sensors output, that made inxi fail to get the sensors data. That was prepending 'T' to temp items, and 'F' to fan items, which made enough sense though I'd never seen it before, so inxi now supports that alternate sensors temp/fan syntax, so that should expand the systems it supports by default out of the box. 8. Finally was able to resolve a long standing issue of loading File::Find, which is only used in --debug 20-22 debugger, from top of inxi to require load in the debugger. I'd tried to fix this before, but failed, the problem is that redhat /fedora have broken apart Perl core modules, and made some of them into external modules, which made inxi fail to start due to missing use of required module that was not really required. Thanks to mrmazda for pointing this out to me, I'd tried to get this working before but failed, but this time I figured out how to recode some of the uses of File::Find so it would work when loaded without the package debugger, hard to figure it, turned out a specific sub routine call in that specific case required the parentheses that had been left off, very subtle. 9. Subtle issue, unlike most of the other device data processors, the USB data parser did not use the remove duplicates tool, which led in some cases to duplicated company names in the output for USB, which looks silly. 10. Somehow devtmpfs was not being detected in all cases to remove that from partitions report, that was added to the file systen filters to make sure it gets caught. 11. Removed LVM image/meta/data data slices from unmounted report, those are LVM items, but they are internal LVM volumes, not available or usable. I believe there are other data/meta type variants for different LVM features but I have added as many types as I could find.. Also explictly now remove any _member type item, which is always part of some other logical structure, like RAID or LVM, those were not explicitly handled before. 12. Corrected the varous terms ZFS can use for spare drives, and due to how those describe slightly different situations than simply spare, changed the spare section header to Available, which is more accureate for ZFS. ENHANCEMENTS: 1. Going along with FIX 2 is updating and adding to intel, elbrus microarch family/ model/stepping IDs (E8C2), so that is fairly up to date now. 2. Added in a very crude and highly unreliable default fallback for intel: /sys/devices/cpu/caps/pmu_name which will show the basic internal name used which can be quite different from what the actual microarch name is, but the hope is that for new intel cpus that come out after these last inxi updates, something may show, instead of nothing. Note these names are often much more generic, like using skylake for many different microarches. 3. More android enhancements, for androids that allow reading of /system/build.prop, which is a very useful informative system info file, more android data will show, like the device name and variant, and a few other specialized items. You can see if your android device lets inxi read build.prop if you see under -S Distro: Android 7.1 (2016-07-23) or just Android. If it shows just android, that means it can't read that file. Showing Android however is also new, since while inxi can't always read build.prop if that file is there, it's android, so inxi finally can recognize it's in android, even though it can't give much info if it's locked down. Inxi in fact did not previously know it was running in android, which is quite different from ARM systems in some ways, but now it does. If the data is available, it will be used in Distro: and in Machine: data to add more information about the android version and device. 4. A big one, for -p/-P/-o/-j now shows with -x the mapped device name, not just the /dev/dm-xx ID, which makes connecting the various new bits easier, for RAID, Logical reports. Note that /dev/mapper/ is removed from the mapped name since that's redundant and verbose and makes the output harder to read. For mapped devices, the new --logical / -L report lets you drill into the devices to find out what dm-xx is actually based on, though that is a limited feature which only supports drilling to a depth of 2 components/devices, there can be more, particularly for bcache, luks setups, but it's just too hard to code that level of depth, so something is better than nothing in this case, which is the actual choice I was faced, the perfect in this case really is/was the enemy of the good, as they say. 5. More big ones, for -a -p/-P/-o/-j shows kernel device major:minor number, which again lets you trace each device around the system and report. 6. Added mdadm if root for mdraid report, that let me add a few other details for mdraid not previously available. This added item 'state;' to the mdraid report with right -x options. 7. Added vpu component type to ARM gfx device type detection, don't know how video processing vcu had escaped my notice. 8. Added fio[a-z] block device, I'd never heard of that before, but saw use of it in dataset, so learned it's real, but was never handled as a valid block device type before, like sda, hda, vda, nvme, mmcblk, etc. fio works the same, it's fio + [a-z] + [0-9]+ partition number. 9. Expanded to alternate syntax Elbrus cpu L1, L2, L3 reporting. Note that in their nomenclature, L0 and L1 are actually both L1, so add those together when detected. 10. RAM, thanks to a Mint user, antikythera, learned, and handled something new, module 'speed:' vs module 'configured clock speed:'. To quote from supermicro: <<< Question: Under dmidecode, my 'Configured Clock Speed' is lower than my 'Speed'. What does each term mean and why are they not the same? Answer: Under dmidecode, Speed is the expected speed of the memory (what is advertised on the memory spec sheet) and Configured Clock Speed is what the actual speed is now. The cause could be many things but the main possibilities are mismatching memory and using a CPU that doesn't support your expected memory clock speed. Please use only one type of memory and make sure that your CPU supports your memory. >>> 11. Since RAM was gettng a look, also changed cases where ddr ram speed is reported in MHz, now it will show the speeds as: [speed * 2] MT/S ([speed] MHz). This will let users make apples to apples speed comparisons between different systems. Since MT/S is largely standard now, there's no need to translate that to MHz. 12. And, even more!! When RAM speeds are logically absurd, adds in note: check This is from a real user's data by the way, as you can see, it triggers all the new RAM per Device report features. Sample: Memory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array-1: capacity: N/A slots: 4 note: check EC: N/A Device-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check Device-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) Device-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check 13. More disks vendor!!! More disk vendor IDs!!! Yes, that's right, eternity exists, here, now, and manifests every day!! Thanks to linux-lite hardware database for this eternally generating list. Never underestimate the creativity of mankind to make more disk drive companies, and to release new model IDs for existing companies. Yes, I feel that this is a metaphore for something much larger, but what that is, I'm not entirely clear about. CHANGES: 1. Recent kernel changes have added a lot more sensor data in /sys, although this varies system to system, but now, if your system supports it, you can get at least partial hdd temp reports without needing hddtemp or root. Early results suggest that nvme may have better support than spinning disks, but it really varies. inxi will now look for the /sys based temp first, then fall back to the much slower and root / sudo only hddtemp. You can force hddtemp always with --hddtemp option, which has a corresponding configuration item. 2. The long requested and awaited yet arcane and obscure feature -L/--logical, which tries to give a reasonably good report on LVM, LUKS, VeraCrypt, as well as handling LVM raid, both regular and thin, is now working, more or less. This took a lot of testing and will probably not be reasonably complete for a while, mainly because the levels of abstraction possible between lvm, lvm raid, mdraid, LUKS, bcache, and other caching and other encryption options are just too deep to allow for easy handling, or easy outputs. But a very solid and good start in my view, going from nothing to something is always a big improvement!! LVM reports require root/sudo. This will, finally, close issue #135. 3. Going along with -L, and serving as a model for the logic of -L, was the complete refactor of -R, RAID, which was a real mess internally, definitely one of the messiest and hardest to work with features of inxi before the refactor. It's now completely cleaned up and modularized, and is easy to add raid types, which was not possible before, now it cleanly supports zfs, mdraid, and lvm raid, with in depth reports and added items like mdraid size, raid component device sizes and maj:min numbers if the -a option is used. Note that LVM RAID requires root/sudo. 4. Added some more sensors dimm, volts items, slight expansion. Note that the possible expansion of sensors made possible by the recently upgraded sensors output logic, as well as the new inxi internal sensors data structure, which is far more granular than the previous version, and allows for much more fine grained control and output, though only gpu data currently takes advantage of this new power under the covers, although as noted, the /sys based hdd temps use the same source, only straight from /sys, since it was actually easier using the data directly from sys than trying to map the drive locations to specific drives in sensors output. Well, to be accurate, since now only board type sensors are used for the temp/fan speed, voltage, etc, reports, the removal of entire sensor groups means less chance of wrong results. 5. To bring the ancient RAID logic to fit the rest of inxi style, made zfs, mdraid, and lvm raid components use incrementing numbers, like cpu cores does. This got rid of the kind of ugly hacks used previously which were not the same for zfs or mdraid, but now they are all the same, except that the numbers for mdraid are the actual device numbers that mdraid supplies, and the LVM and ZFS numbers are just autoincremented, starting at 1. 6. Changed message <root/superuser required> to <superuser required> because it's shorter and communicates the same thing. INTERNAL CODE CHANGES: 1. Small, transparent test, tested on Perl 5.032 for Perl 7 compatibility. All tests passed, no legacy code issues in inxi as of now. 2. Although most users won't notice, a big chunk of inxi was refactored internally, which is why the new -L, the revamped -R, and the fixed disk totals finally all can work now. This may hopefully result in more consistent output and fewer oddities and randomnesses, since more of the methods all use the same tools now under the covers. Ths refactor also significantly improved inxi's execution speed, by about 4-5%, but most of those gains are not visible due to the added new features, but the end result is new inxi runs roughly the same speed as pre 3.2.00 inxi, but does more, and does it better, internally at least. If you have a very good eye you may also note a few places where this manifests externally as well. Last I checked about 10-12% of the lines of inxi had been changed, but I think that number is higher now. Everything that could be optimized was, everything could be made more efficient was. 3. Several core tools in inxi were expanded to work much more cleanly, like reader(), which now supports returning just the index value you want, that always happened on the caller end before, which led to extra code. get_size likewise was expanded to do a string return, which let me remove a lot of internal redundant code in creating the size unit output, like 32 MiB. uniq() was also redone to work exclusively by reference. 4. Many bad reference and dereference practices that had slipped into inxi from the start are mostly corrected now, array assignments use push now, rather than assign to array, then add array to another array, and assign those to the master array. Several unnecessary and cpu/ram intensive copying steps, that is, were removed in many locations internally in inxi. Also now inxi uses more direct anonymous array and hash refernce assignments, which again removes redundant array/hash creation, copy, and assignment. 5. Also added explicit -> dereferencing arrows to make the code more clear and readable, and to make it easier for perl to know what is happening. The lack of consistency actually created confusion, I was not aware of what certain code was doing, and didn't realize it was doing the same thing as other code because of using different methods and syntaxes for referencing array/hash components. I probably missed some, but I got many of them, most probably. 6. Instituted a new perl builtin sub routine rule which is: if the sub takes 2 or more arguments, always put in parentheses, it makes the code much easier to follow because you see the closing ), like: push(@rows,@row); Most perl builtins that take only one arg do not use parentheses, except length, which just looks weird when used in math tests, that is: length($var) > 13 looks better than length $var > 13. This resolved inconsistent uses that had grown over time, so now all the main builtins follow these rules consistently internally. Due to certain style elements, and the time required to carefully go through all these rules, grep and map do not yet consistently use these rules, that's because the tendency has been to use the grep {..test..} @array and map {...actions...} @array 7. Mainly to deal with android failures to read standard system files due to google locking it down, moved most file queries to use -r, is readable, rather than -e, exists, or -f, is file, unless it only needs to know if it exists, of course. This fixed many null data errors in android even on locked androids. 8. Added in %mapper and %dmmapper hashes to allow for easy mapping and unmapping of mapped block devices. Got rid of other ways of doing that, and made it consistent throughout inxi. These are globals that load once. 9. Learned that perl builtin split() has a very strange and in my view originally terrible decision that involves treating as regex rules string characters in split string, like split('^^',$string), which should logically be a string value, not a ^ start search followed by a ^, but that's how it is, so that was carefully checked and made consistent as well. Also expanded split to take advantage of the number of splits to do, which I had only used occasionally before, but only updated field/value splits where I have a good idea of what the data is. This is very useful when the data is in the form of field: value, but value can contain : as well. You have to be very careful however, since some data we do want in fact the 2nd split, but not the subsequent ones, so I only updated the ones I was very sure about. 10. Going along with the cpu microarch fixes, updated and cleaned up all the lists of model/stepping matches, now they are all in order and much easier to scan and find, that had gotten sloppy over the years. 11. More ARM, moved dummy and codec device values into their own storage arrays, that let me remove the filters against those in the other detections. Makes logic easier to read and maintain as well.
2020-12-15 23:13:14 +00:00
Only use the following in conjunction with \fB\-\-debug 2[012]\fR, and only
man edit
2018-09-28 21:54:00 +00:00
use if you experienced a failure or hang, or were instructed to do so.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
.TP
New version, new man. Bugs: 1. If you consider failure to identify a mounted yet hidden partition a bug, then that bug is fixed, but I consider that as more of a fix than a bug. Fixes: 1. Added more device pattern ID for odroid C1 and C2, these are now pretty well supported. 2. inxi failed to handle a certain type of hidden partition, so far only seen with udiskctl mounted TimeShift partitions, but this may be a more general udisk issue, but so far not enough information. The fix is to use the lsblk data to build up missing partitions, so this fix is for non legacy Linux systems only. The fix works pretty well, but it's hard to know until we get a lot more real world data, but given so far I've received only one issue report on it, I suspect this is not a common situation, but you never know, it would never have shown up in datasets unless I had looked specifically for it, so it may be more common than I think. 3. Cleaned up and simplified new --admin -p and -d logic. Enhancements: 1. For debugging, renamed all user debugger switches to have prefix --debug. These options are to help debug debugger failures, and so far have been tested and solved the failures, so I'm adding them all to the main man and help menu, thus raising them to the level of supported tools. These were enormously helpful in solving proc or sys debugger hangs. * --debug-proc * --debug-proc-print * --debug-no-sys * --debug-sys * --debug-sys-print 2. Added findmnt output to debugger, that may be useful in the future. Also added df -kTPa to also catch hidden partitions in debugger. 3. Added in another user level debugger, triggered with --debug-test-1 flag. This will do whatever operation is needed at the time for that user. Some issues can only be resolved by the user on their machine. 4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
2018-09-28 21:25:17 +00:00
.B \-\-debug\-proc\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Force debugger to parse \fB/proc\fR directory data when run as root. Normally
this is disabled due to unpredictable data in /proc tree.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
New version, new man. Bugs: 1. If you consider failure to identify a mounted yet hidden partition a bug, then that bug is fixed, but I consider that as more of a fix than a bug. Fixes: 1. Added more device pattern ID for odroid C1 and C2, these are now pretty well supported. 2. inxi failed to handle a certain type of hidden partition, so far only seen with udiskctl mounted TimeShift partitions, but this may be a more general udisk issue, but so far not enough information. The fix is to use the lsblk data to build up missing partitions, so this fix is for non legacy Linux systems only. The fix works pretty well, but it's hard to know until we get a lot more real world data, but given so far I've received only one issue report on it, I suspect this is not a common situation, but you never know, it would never have shown up in datasets unless I had looked specifically for it, so it may be more common than I think. 3. Cleaned up and simplified new --admin -p and -d logic. Enhancements: 1. For debugging, renamed all user debugger switches to have prefix --debug. These options are to help debug debugger failures, and so far have been tested and solved the failures, so I'm adding them all to the main man and help menu, thus raising them to the level of supported tools. These were enormously helpful in solving proc or sys debugger hangs. * --debug-proc * --debug-proc-print * --debug-no-sys * --debug-sys * --debug-sys-print 2. Added findmnt output to debugger, that may be useful in the future. Also added df -kTPa to also catch hidden partitions in debugger. 3. Added in another user level debugger, triggered with --debug-test-1 flag. This will do whatever operation is needed at the time for that user. Some issues can only be resolved by the user on their machine. 4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
2018-09-28 21:25:17 +00:00
.TP
.B \-\-debug\-proc\-print\fR
Use this to locate file that /proc debugger hangs on.
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
.TP
.B \-\-debug\-no\-exit\fR
Skip exit on error when running debugger.
.TP
.B \-\-debug\-no\-proc\fR
Skip /proc debugging in case of a hang.
New version, new man. Bugs: 1. If you consider failure to identify a mounted yet hidden partition a bug, then that bug is fixed, but I consider that as more of a fix than a bug. Fixes: 1. Added more device pattern ID for odroid C1 and C2, these are now pretty well supported. 2. inxi failed to handle a certain type of hidden partition, so far only seen with udiskctl mounted TimeShift partitions, but this may be a more general udisk issue, but so far not enough information. The fix is to use the lsblk data to build up missing partitions, so this fix is for non legacy Linux systems only. The fix works pretty well, but it's hard to know until we get a lot more real world data, but given so far I've received only one issue report on it, I suspect this is not a common situation, but you never know, it would never have shown up in datasets unless I had looked specifically for it, so it may be more common than I think. 3. Cleaned up and simplified new --admin -p and -d logic. Enhancements: 1. For debugging, renamed all user debugger switches to have prefix --debug. These options are to help debug debugger failures, and so far have been tested and solved the failures, so I'm adding them all to the main man and help menu, thus raising them to the level of supported tools. These were enormously helpful in solving proc or sys debugger hangs. * --debug-proc * --debug-proc-print * --debug-no-sys * --debug-sys * --debug-sys-print 2. Added findmnt output to debugger, that may be useful in the future. Also added df -kTPa to also catch hidden partitions in debugger. 3. Added in another user level debugger, triggered with --debug-test-1 flag. This will do whatever operation is needed at the time for that user. Some issues can only be resolved by the user on their machine. 4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
2018-09-28 21:25:17 +00:00
.TP
.B \-\-debug\-no\-sys\fR
Skip /sys debugging in case of a hang.
.TP
.B \-\-debug\-sys\fR
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
Force PowerPC debugger parsing of /sys as doas/sudo/root.
New version, new man. Bugs: 1. If you consider failure to identify a mounted yet hidden partition a bug, then that bug is fixed, but I consider that as more of a fix than a bug. Fixes: 1. Added more device pattern ID for odroid C1 and C2, these are now pretty well supported. 2. inxi failed to handle a certain type of hidden partition, so far only seen with udiskctl mounted TimeShift partitions, but this may be a more general udisk issue, but so far not enough information. The fix is to use the lsblk data to build up missing partitions, so this fix is for non legacy Linux systems only. The fix works pretty well, but it's hard to know until we get a lot more real world data, but given so far I've received only one issue report on it, I suspect this is not a common situation, but you never know, it would never have shown up in datasets unless I had looked specifically for it, so it may be more common than I think. 3. Cleaned up and simplified new --admin -p and -d logic. Enhancements: 1. For debugging, renamed all user debugger switches to have prefix --debug. These options are to help debug debugger failures, and so far have been tested and solved the failures, so I'm adding them all to the main man and help menu, thus raising them to the level of supported tools. These were enormously helpful in solving proc or sys debugger hangs. * --debug-proc * --debug-proc-print * --debug-no-sys * --debug-sys * --debug-sys-print 2. Added findmnt output to debugger, that may be useful in the future. Also added df -kTPa to also catch hidden partitions in debugger. 3. Added in another user level debugger, triggered with --debug-test-1 flag. This will do whatever operation is needed at the time for that user. Some issues can only be resolved by the user on their machine. 4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
2018-09-28 21:25:17 +00:00
.TP
.B \-\-debug\-sys\-print\fR
Use this to locate file that /sys debugger hangs on.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH SUPPORTED IRC CLIENTS
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
BitchX, Gaim/Pidgin, ircII, Irssi, Konversation, Kopete, KSirc, KVIrc,
Weechat, and Xchat. Plus any others that are capable of displaying either
built\-in or external script output.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH RUNNING IN IRC CLIENT
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
To trigger inxi output in your IRC client, pick the appropriate method from the
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
list below:
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
fixed man glitch
2018-07-23 20:40:49 +00:00
.B Hexchat, XChat, Irssi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR(and many other IRC clients)
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.B /exec \-o inxi \fR[\fBoptions\fR]
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If you don't include the \fB\-o\fR, only you will see the output on your local
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
IRC client.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
.B Konversation
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B /cmd inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
To run inxi in Konversation as a native script if your distribution or inxi
package hasn't already done this for you, create this symbolic link:
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
KDE 4:
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B ln \-s /usr/local/bin/inxi /usr/share/kde4/apps/konversation/scripts/inxi
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
KDE 5:
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.B ln \-s /usr/local/bin/inxi /usr/share/konversation/scripts/inxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If inxi is somewhere else, change the path \fB/usr/local/bin\fR to wherever it
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
is located.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If you are using KDE/QT 5, then you may also need to add the following to get
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
the Konversation \fR/inxi\fR command to work:
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.B ln \-s /usr/share/konversation /usr/share/apps/
decided have skills to edit
2012-09-15 09:18:08 +00:00
Then you can start inxi directly, like this:
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B /inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
.B WeeChat
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B NEW: /exec \-o inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B OLD: /shell \-o inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Newer (2014 and later) WeeChats work pretty much the same now as other console
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
IRC clients, with \fB/exec \-o inxi \fR[\fBoptions\fR]. Newer WeeChats
have dropped the \fB\-curses\fR part of their program name, i.e.:
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fBweechat\fR instead of \fBweechat\-curses\fR.
fixed man pages, made more consistent highlights for I and R types. Updated weechat data to reflect that weechat is now like most other irc console clients with /exec -o functionality.
2014-04-03 18:15:23 +00:00
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
.SH CONFIGURATION FILE
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
inxi will read its configuration/initialization files in the
following order:
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fB/etc/inxi.conf\fR contains the default configurations. These can be
-------------------------------------------------------------------------------- RELEASE NOTES: -------------------------------------------------------------------------------- Some very nice issue reports have helped correct various corner case issues. Mint users helped find a big one with lspci. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Unsure how to handle Android case where inxi correctly does -r test, see bug 3 fixes 6, but android incorrectly claims it is readable when it is not readable, then the reader tool can't read the file and fails with permissions error. This is one of those weird android errors that are pretty much impossible to fully work around, but we can get rid of the readline() errors when reader() was trying to work on a file handle that did not exist, that part was an inxi bug. -------------------------------------------------------------------------------- BUGS: 1. dm detection was not using case sensitive search for duplicates, leading to cases where dm like slim / SLiM failed to get detected and then repeated in output. Anonymous BSD debugger dataset exposed this issue, thanks. 2. In certain corner cases, like ARM Android, sub reader got passed a file that had passed the is readable -r test, but it still failed with permissions error, which then led reader to try to keep working with a null $fh. While in theory nothing non readable should be passed to reader(), that fails when the OS fails to actually follow correct readable rules, as in this case. Added protections in reader() to handle this case, now will show error, but will not try to work with $fh, that is how it should have been all along, but this is a very corner case. Exposed by an anoymous ARM debugger dataset. Thanks Termux user for creating the debugger dataset that exposed this issue. 3. lspci parser didn't null port value each iteration, resulting in all pci items getting port values. Not a big deal, port is only used one place, but good to find and correct that error. 4. Not an inxi bug, but would appear so to end users: lspsci -nnv implements a truncating routine and breaks the first line for each bus id. See Fix 6 and Code fix 3. -------------------------------------------------------------------------------- FIXES: 1. -S and -I would show Console: tty pts/3 even though pts device is a pty, not a tty. The only time this happened was when connecting to a remote system using ssh or something like that. Local console still shows Console: tty 2 since that was correct, but Console: tty pts/2 was confusing since technically it's not a tty, it's a pty, pseudo terminal. Now shows, when relevant: Console: tty 2 OR Console: pty pts/2. 2. Issue #252 notes that Emacs (and possibly other code/text editors with native embedded terminals) includes a native virtual terminal that also follows configuration rules from the editor to highlight trailing spaces. This created odd looking screen output in Emacs vt mode since inxi always sets key/value pairs with a white space ending as separator for next key value pair for screen output mode, resulting always in a trailing space on each vt screen line. Fix was to remove the last trailing space just prior to the print line point to avoid this issue. As a general thing, I'm curious to learn if any editor other than Emacs actually contains its own virtual terminal that also follows the editor rules for output. Or if any virtual terminal has such a highlight trailing space rule, which would be imo so annoying it's hard to understand why a vt would implement it. Easy to understand why Emacs (or any editor) does it, but an editor also being a vt AND applying certain editor display configurations to the vt is a very specific and unique circumstance I'd say. Odd, historical, but there it is, why not handle it? 3. ARM / Android case where certain files passed the read -r test, but failed with permission denied error. This tripped a further glitch where reader() would then try to work with the failed $fh, see bug 2. This was really more a fix than a bug, since the bug in this case was in android permissions tests, not inxi, but it appears to be a bug to end users, so it's handled now. 4. Another ARM/Android, there was a voltage regulator IP that contained the term wlan so it tripped false positive for network match. Added a new type, regulator, to filter out those, like codec and dummy do already. 5. For issue #254, fix for cygwin ERR-102 in partitions, add cygwin test, new dev type, 'windows', dev base then becomes E: or whatever. To avoid confusing D: for a key: with no value, added D:/ slash. 6. Mint people discovered lspci issue, lspci -nnv has a bug where it will truncate the output of the first line per bus ID if it's over some arbitrary amount, then tack on rev and other items to end of that string, which leads to the block: [vendorID:productID] getting truncated or removed altogether. Clearly an oversight, at least I hope it's an oversight on lspci's part, but have to work around the issue anyway since it may never get fixed, and has been around a long time. Bug is in lspci 3.7, 3.6.4, and probably earlier. Also added in a fillin tool for this rare case, lspci -n data is used to replace the missing values. Note that while lspci recommends using -mmv, for machine parsing, apparently nobody noticed that -mmv doesn't have the same data items as -nnv, sigh. 7. Issue #255 noted that the combination of: GoogleDrive Hogne: fuse.rclone 15728640 which is two word remote fs AND a fs type with a '.' in it would fail to trip the handler for that multi word remote mount name. Also failed to detect as remote fs, added fs specific test since the actual mount name doesn't permit reliable detection as remote type. Testing for trailing ':' isn't safe since ':' alone is not an invalid character in a file system name as far as I know. Further, this exposed that the ^^ space replacements for $row[0] fs > 1 word name were not being reset soon enough in the logic, that's also corrected. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Neglected to support standard package config file override /etc/inxi.d/inxi.conf item. This is mainly useful for packaged inxi's who want to override the distro maintainer /etc/inxi.conf file. Test priority is the same except /etc/inxi.d/inxi.conf comes right after /etc/inxi.conf now in the test sequence. 2. Added basic cygwin id, yes, inxi works in cygwin, apparently, with some issues. Added cygwin os id to distro ids. 3. Added --version info for debugger, sometimes we want to know what verion of a tool, like lspci, in case it has a bug or something. 4. Added exfat and apfs to unmounted fs types. 5. More disk vendors!! New vendor ID matches!! Yes, yes, you've heard it all before, the list never ends!! The eternal chaos of existence manifested in just how many IDs can be generated for new and old disk vendors alike!!! -------------------------------------------------------------------------------- CHANGES: 1. No changes this release. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Pull request #253 corrected typos, urls, and other errors in man page, inxi/pinxi comments, pinxi.1/inxi.1, README.txt, and updated LICENSE.txt to current gnu wording. -------------------------------------------------------------------------------- CODE: 1. Forgot to add lspci debugger fake data option, that's corrected. That's --fake lspci, now works, didn't before, only the bsd pci tools had fake switches previously, since lspci never needs debugging really, but did now to test an issue report. 2. Added -CYGWIN to debugger file name. Added -ANDROID if ARM and if android. 3. With Fix 6, refactored entire lspci_data block, added lspci_n_data item, which matches bus id of lspci -nnv when corruption occurs and replaces vendor, product, and if also missing, rev version. I kind of knew I'd have to do this fix one day, that was the same fix logic used on the BSD pci tools, which have similar issues with consistency in output, or lack thereof. This refactor is long term very good because it avoids an entire class of possible errors, and makes pci detections far more robust. 4. Created new repo, for legacy code, inxi-legacy. Moved branch inxi-c to inxi-legacy/xorg-c, moved branch xiin to /xiin, moved branch inxi-legacy (binxi) to inxi-legacy/inxi-legacy. Those directories each contain all the files each branch had in it. This gets rid of some branches clutter, and nobody needs to see those anymore, but if they care, they can look at them. Note that to do this, I had to merge their histories, which was not that nice, but git is just really bad at this type of stuff, so that's how it goes. Times like this really make me miss svn's directory based branch approach... 5. Simplified sub fs_excludes, simplified regex constructors for all function that use this data, made list more fault tolerate by adding global (fs)?(\d{0,2} which means all file systems can have or not have 'fs' at end, and all can have or not have a version number in string. 6. Exposed by issue #255, refactored slightly ordering of partition filter logics and variable resets in the df output processing loop. 7. Added --fake partitions, to help debug odd corner cases like cygwin glitches.
2021-10-12 01:56:00 +00:00
overridden by creating a \fB/etc/inxi.d/inxi.conf\fR file (global override,
which will prevent distro packages from changing or overwriting your edits. This
method is recommended if you are using a distro packaged inxi and want to
override some configuration items from the package's default
\fB/etc/inxi.conf\fR file but don't want to lose your changes on a package
update.
You can old override, per user, with a user configuration file found in one of
the following locations (inxi will store its config file using the following
precedence:
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
if \fB$XDG_CONFIG_HOME\fR is not empty, it will go there, else if
\fB$HOME/.conf/inxi.conf\fR exists, it will go there, and as a last default,
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
the legacy location is used), i.e.:
New version, new tarball. This is a significant change, but inxi should handle it smoothly. While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests: 1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively. 2. Since those will often be blank, it then uses a second priority check: $HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here: $HOME/.inxi 3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before In order to make this switch transparent to users, inxi will move the files from .inxi to the respective .config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup. Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in /usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky to guess about user or system intentions, this man location correction will only apply if users have never installed inxi before manually, and have no distro version installed, unlike the config/data directory, which does update neatly with output letting users know the data was moved. Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way, ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise using if present the /usr/local/share/man/man1 location for new manual install users. Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current, then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that inxi will update to the new man location. Also added some more XDG debugger data as well to cover this for future debugger data. This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and issue 101, which I made today just to force the update. Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated, and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fB$XDG_CONFIG_HOME/inxi.conf\fR > \fB$HOME/.conf/inxi.conf\fR >
\fB$HOME/.inxi/inxi.conf\fR
New version, new tarball. This is a significant change, but inxi should handle it smoothly. While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests: 1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively. 2. Since those will often be blank, it then uses a second priority check: $HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here: $HOME/.inxi 3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before In order to make this switch transparent to users, inxi will move the files from .inxi to the respective .config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup. Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in /usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky to guess about user or system intentions, this man location correction will only apply if users have never installed inxi before manually, and have no distro version installed, unlike the config/data directory, which does update neatly with output letting users know the data was moved. Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way, ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise using if present the /usr/local/share/man/man1 location for new manual install users. Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current, then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that inxi will update to the new man location. Also added some more XDG debugger data as well to cover this for future debugger data. This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and issue 101, which I made today just to force the update. Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated, and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
.SH CONFIGURATION OPTIONS
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
See the documentation page for more complete information on how to set
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
these up, and for a complete list of options:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.I https://smxi.org/docs/inxi\-configuration.htm
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
.B Basic Options
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Here's a brief overview of the basic options you are likely to want to use:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBCOLS_MAX_CONSOLE\fR The max display column width on terminal. If
terminal/console width or \fB\-\-width\fR is less than wrap width, wrapping of
line starter occurs
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBCOLS_MAX_IRC\fR The max display column width on IRC clients.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBCOLS_MAX_NO_DISPLAY\fR The max display column width in out of X / Wayland /
desktop / window manager.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBCPU_SLEEP\fR Decimal value \fB0\fR or more. Default is usually around
\fB0.35\fR seconds. Time that inxi will 'sleep' before getting CPU speed data,
so that it reflects actual system state.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBDOWNLOADER\fR Sets default inxi downloader: curl, fetch, ftp, perl, wget.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
See \fB\-\-recommends\fR output for more information on downloaders and Perl
downloaders.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBFILTER_STRING\fR Default \fB<filter>\fR. Any string you prefer to see
instead for filtered values.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBINDENT\fR Change primary indent width of wide mode output. See
\fB\-\-indent\fR.
\fBINDENTS\fR Change primary indents of narrow wrapped mode output, and second
level indents. See \fB\-\-indents\fR.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBLIMIT\fR Overrides default of \fB10\fR IP addresses per IF. This is only of
interest to sys admins running servers with many IP addresses.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
\fBLINES_MAX\fR Values: [\-2\-xxx]. See \fB\-Y\fR for explanation and values.
Use \fB\-Y \-3\fR to restore default unlimited output lines. Avoid using this in
general unless the machine is a headless system and you want the output to be
always controlled.
\fBMAX_WRAP\fR (or \fBWRAP_MAX\fR) The maximum width where the line starter
wraps to its own line. If terminal/console width or \fB\-\-width\fR is less than
wrap width, wrapping of line starter occurs. Overrides default. See
\fB\-\-max\-wrap\fR. If \fB80\fR or less, wrap will never happen.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBNO_DIG\fR Set to \fB1\fR or \fBtrue\fR to disable WAN IP use of \fBdig\fR
and force use of alternate downloaders.
New inxi, new man. Huge update, new line types, huge graphics upgrade, new switches, bug fixes, glitch fixes, enhancements, you name it, this has got it!! Note that since this features a new primary line item (-j / --swap Swap:), the version number has been bumped to 3.1.0, making this a major version upgrade, the first since the new Perl inxi rewrite was launched, though of course 3.0.0 contained many new line items as well, but this is the first actually new line item since then. Bugs: 1. Big bug fix: if -z used, and -p, and user had partitions mounted in $HOME directory, the partitions would buggily duplicate in the output. 2. See Fix 1, inxi was reporting the wrong (or no in some cases) Xorg driver because it was using the wrong Xorg log, it was only searcing in the original /var/log/Xorg.0.log file, not the newer alternative path locations. Fixes: 1. Both an enhancement and a fix, users reported Xorg log file location changes. Fix is that now inxi uses wildcard searches of all readable locations that can contain the log files, then collects a list of them, and uses the last modified one. This ensures that the best possible guess is made about which actual log file is current, which should lead to significantly more reliable Xorg driver reports overall. Note that this fix works for user level and root level, it will always use the most recent readable file no matter what. For root, that should translate to the most recent on an absolute level Xorg log file. This issue was caused by gdm moving from Xorg.0.log to Xorg.1.log on some systems, but not all, and also, the location is often but not always now: ~/.local/share/xorg/Xorg.[01234..].log [except for root, which is why root has to search for all user Xorg log files to find the most recent one. There were many red-herrings in this issue report, so it took some research to dig through those to the real data sources. 2. Now that the compositor detection is out of early testing mode, enabled always on compositor detection for Wayland systems. Since the compositor is the Wayland display server, it makes sense to always show it if Wayland. Note that there is still no known way to actually reliably get Wayland data beyond simple environmental variables that let inxi detect Wayland is running the desktop. Lack of reliable logs or debugging tools across Wayland compositors makes this entire process about 10-50x more difficult than it should have been. 3. In keeping with 2., also moved compositor: item to be right after server: item. 4. Debian bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=inxi requested that HTTP::Tiny be set to default always check SSL certificates. Now inxi does that, and --no-ssl flag disables this, which makes the Perl http downloader now work roughly the same as wget, curl, etc. 5. Man page fixes, added pointer placeholders for out of alphabetical order options, so you can find anything by looking down the alpha sorted lists, like: --swap - See -j. Since inxi is running out of single letters that match new features, it's easier to point man readers to the right item without them having to already know it to find it. Also added --dbg [2-xx] pointer to github inxi-perl/docs/inxi-values.txt so people interested can learn how to trip the various per feature screen debuggers. Enhancements: 1. updated ubuntu ids, added 'focal LTS'. 2. USB Graphic devices added. This will add support for USB graphics adapters, an uncommon but existing category, often used in SOC boards, for example, but also on desktops, and things like USB webcams. Leaving these off was really just an oversight, the programming internally had the data, it just wasn't using it. 3. Support added for TV card type multimedia devices in Graphics. That was actually a long term oversight, I'd simply missed that in the device ID documentation, one of the multimedia device subtypes is Video device. 4. Huge, massive, internal upgrade to allow for -Ga output, which gives a technically accurate Xorg > Display > Screen > Monitor breakdown. Note that Display and Screen data come from xdpyinfo, and Monitor info comes from xrandr, but if xrandr is missing, the Screen information shows. Technically for -G, -Gxx, end users see very little difference except the per Screen / per Monitor resolutions are listed with a 1: type counter per item. Note that Xorg Screens are NOT Monitors, they are a virtual space Xorg constructs out of the pieces of hardware that make up the Screen space. In many cases, 1 Xorg Screen contains only 1 Monitor, but the dimensions or dpi are frequenty different. New output items: Display: ... display ID: [Xorg Screen identifier, like :0.0]; screens: [Total Xorg Screens in current Display]; [s-default: [if > 1 Screens, default Screen number]] Screen-x: [Screen number]; s-res: [Xorg Screen resolution]; s-dpi: [Xorg Screen dpi]; s-size: [Xorg Screen mm (inch) size; s-diag: [diagonal of Xorg Screen size] Monitor-x: [Monitor Xorg ID]; res: [Actual monitor pixel dimensions]; hz: [actual monitor reported frequency]; dpi: [actual monitor dpi as calculated from actual monitor resolution/size; size: [actual monitor size in mm (inch); diag: [actual diagonal size in mm (inch). 4a. -Gxx now shows Xorg s-dpi: for the Screen as well, after the main resolution section for -G. 5. Big improvement in error messages and logging for Xorg driver detections, this logic is much more robust now, but after the main driver fix, also much less likely to ever be seen. 6. Almost not visible to users, but major internal graphics refactor allows now for more modular treatment, and eventual Wayland data sourcing. Currently most Wayland data sourcing is in stub form, or only logically possible, but as it grows possible (if ever, since Wayland protocal appears to have totally neglected enforcing single location logging, and single tool debugging for the entire Wayland protocol of compositors, a massive oversight in my view). The -Ga refactors internally made this much more possible, and I integrated switches and tests, and fallbacks, and stubs in some locations, so it was clear where current Xorg specific logic is, and where future Wayland logic will fit in, sort of anyway. 7. Debugger tools added for new features, or most of them. 8. New primary line item: --swap / -j. This moves all swap data to a dedicated Swap: line, which looks roughly the same as Partition: lines, but when -j/--swap is used, all swap types, not only physical partition swaps, show. This should make some users happy. 9. Added more cpu family IDs for Zen 2 series of cpu, tweaked some later Intel cpu family ids in terms of cpu arch name tool. 10. By request, added ability filter out all UUID or Partition Label strings in -j, -o, -Sa, -p, -P. Those are tripped by --filter-label and --filter-uuid. Mostly useful in fringe cases, for example, replacing label or UUID from -Sa kernel boot parameters with root=LABEL=<filter>, or in cases you want to show full -v8 output without showing UUID or Labels, whatever. 11. Added --no-dig/--dig plus configuration option NO_DIG=true. This disables dig in cases where dig is installed but failed due to maybe network firewall rules or something, and WAN IP detection fails. Normally you always want to use dig, it's faster, more reliable, and safer, than all the other regular downloader based methods, but we have seen server setups where for some reason those types of dig requests were blocked, thus disabling WAN IP detection. 12. Added in WAN IP failure case, if dig was used, suggestion to try again with --no-dig, since most users are unlikely to learn about this issue, or the solution to it. 13. Added single letter shortcut -J for --usb, maybe this will help people discover usb component of inxi, now you can request for instance: inxi -FJaz 14. Added xonsh to supported shells, that had tripped a perl undefined value for start client bug since xonsh uses single word for version, xonsh/234 so the default value, 2nd word, was undefined. 15. More SSD and USB drive vendors from the endless fountain over at Linux Hardware Database (linuxliteos.com). Changes: 1. Small change in how screen resolutions are output in -G non -a mode, now each Screen / Monitor will increment by 1 the 1: [resolution~hz] key. This helps make it more readable. Note that in non -a mode, the increments are just based on Screen, then Monitor, Monitor, Screen, and so on, counts. Most users will only have one Screen systems, but more advanced setups may use the Xorg > 1 Screen, each screen able to run > 1 monitors. The counts in say, a 2 Screen system, with 3 monitors, would be: 1: res1 [from screen 0, monitor 1] 2: res2 [from screen 0, monitor 2] 3: res3 [from screen 1, monitor 1. If xrandr is not installed, it would show: 1: res1 [from screen 0] 2: res2 [from screen 1]
2020-04-23 02:35:53 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBNO_DOAS\fR Set to \fB1\fR or \fBtrue\fR to disable internal use of
\fBdoas\fR.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBNO_HTML_WAN\fR Set to \fB1\fR or \fBtrue\fR to disable WAN IP use of
\fBHTML Downloaders\fR and force use of dig only, or nothing if dig disabled
as well. Same as \fB\-\-no\-html\-wan\fR. Only use if dig is failing, and
HTML downloaders are hanging.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBNO_SUDO\fR Set to \fB1\fR or \fBtrue\fR to disable internal use of
\fBsudo\fR.
New version, man page, exciting changes!! Bugs: 1. issue #200 - forgot to add all variants for -p, now works with --partition-full and --partitions-full 2. issue #199 - another one, forgot to add --disk to -D for long version. Thanks adrian15 for both of these, he was testing something and discovered these were missing. 3. Issue #187 an issue with RAID syntax not being handled in a certain case, thanks EnochTheWise for following through on this one. This turned out to be a bad copy paste, a test pattern did not match the match pattern. Fixes: 1. Fixed some docs typos. 2. Issue #188 fixed protections and filters for some glxinfo output handlers. 3. Issue #195, for Elbrus bit detection. 4. Added filter to cpu data, was not skipping if arm, so Model string was treated numerically. Enhancements: 1. Added rescatux to Debian system base detections. This closes issue #202, again from adrian15, thanks. 2. For cpu architecture, updated for latest AMD ryzen and other families, like Zen 3, which is just coming out re available data. Also latest Intel, which are trickier to ID right now, but I think I got the latest ones right, That's things like coffee lake, amber lake, comet lake, etc. 3. Huge one, full (hopefully out of the box) Russian Elbrus CPU support. Thanks to the alt-linux and the others who helped provide data and feedback to get support. Note that this was also part of correcting 64 bit detection for e2k type, which is how Elbrus IDs internally. See issue #197 which I've left open for the time being for more information on this CPU and how it's now handled by inxi. Note all available data should now work for Elbrus, including physical cpu/core counts etc. Elbrus do not show flag information, nor do they use min/max speed, so that data isn't available, but everything else seems to work well. 4. Eternal disk vendors. Thanks linux lite hardware database, you continue to help make the disk vendor feature work by supplying every known vendor ever seen. 5. To close debian bug report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=942194 Note that the fix is simply to give the user the option to disable this behavior with the new --no-sudo and NO_SUDO configuration file options. This issue should never have been filed as a bug since even the poster admitted it was a wishlist item, but because of how debian bug tracker works, it's hard to get rid of invalid bugs. Note that this is the internal use of sudo for hddtemp and file, not starting inxi with sudo, so using this option or configuration item just removes sudo from the command. Note that because the user did not do as requested, and never actually filed a github wishlist issue, and since his request was vague and basically pointless, the fix is just to let you switch off sudo, that's all.
2019-11-20 04:42:21 +00:00
New version, new man. Huge set of changes. Excitement!! Thrills! Spills? Bugs: 1. There was a missing main::is_int test that in some instances triggered error. This is corrected. 2. More of a fix, but legacy devices were not matching NIC to IF because the /sys path was not a link as it is now. I made a separate function to handle that match test so it could be more readily be worked with. Fixes: 1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why? who knows. That to me is a bug, but since if it's not handled in inxi, it makes it look like inxi has a server: -G bug, I worked around it. Again. This creates the bug when you do not use the actual true path of Xorg where Xorg.wrapper complains and will not show -version data. Why move this? why use that wrapper thing? I don't know, makes no sense to me. 2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though it will certainly need more work. 3. Better ARM support, added in devicetree strings, which helps pad out the Devices IDs, albeit with very little data, but at least the devices are detected. Thanks Manjaro ARM people there again. 4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS device totally puke and die, killed networking, so since very few upstart running systems will be arm/mips devices, I decided there better safe than sorry. 5. Found another uptime syntax case, MIPS as root does not have the users item. 6. Many tweaks to SOC data generators, will catch more categories, but the lists will never be done since each device can be, and often is, random re the syntax. 7. USB networking failed to test usb type for 'network', which led to failed ids on some device strings. SOC types are now filtered through a function to create consistent device type strings for the per device tool to use to assign each to its proper @device_<type> array. 8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and trailing subsubclass values, this converts it into the same hex 4 item string that is used by GNU/Linux/lspci so I can apply consistent rules to all pci types, no matter what the generator source is, lspci, pcidump, pciconf, and eventually pcictl if I can get netbsd running. 9. Fixed internal --dbg counts for various features, and updated docs for that. 10. Fixed ARM / MIPS missing data messages, they were redundant. 11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt. 12. Added unity-system-compositor as mir detection, who knew? I guess that was its production application name all along? Oh well. Enhancements: 1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough to make errors not happen.-repos 2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non BSD unix. 3. Added S6 init system to init tool. 4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required> message on Device-x: lines if not root. All working. 5. Fully refactored the old pci stuff to DeviceData package/class, due to adding so many types to that, it made sense to make it a single class. 6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense to integrate the data grabber into one package/class 7. Added speed: item to USB:, it shows in Mb/s or Gb/s 8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the devices data logic into DeviceData. 9. Added ash shell, not sure if that detection will work, but if it does, it will show. 10. As part of the overall DeviceData refactor, I moved all per type data into dedicated arrays, like @device_graphics, @device_audio, @device_network, etc, which lets me totally dump all the per device item tests, and just check the arrays, which have already been tested for on the construction of the primary DeviceData set. Moved all per type detections into DeviceData so that is now one complete logic block, and the per type data generators don't need to know about any of that logic at all anymore. 11. Added sway, swaybar, way-cooler as window managers, info items. Not 100% positive about the --version, their docs weren't very consistent, but I think the guess should be right if their docs weren't incorrect. 12. Added vendor: item to network, not sure why I kept that off when I added vendor: to audio and graphics. It made sense at the time, but not now, so now -GNA all have vendor: if detected. 13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware database, somehow you have users that manage to use every obscure usb/ssd/hdd known to humanity. 14. Big update to --admin, now has the following: A: partitions: shows 'raw size: ' of partition, this lets users see the amount of file system overhead, along with the available size as usual. B: partitions: show percent of raw in size: C: partitions: show if root, block size of partition file system. Uses blockdev --getbsz <part> D: partition: swap: show swappiness and vfs cache pressure, with (default) or (default <default value) added. This apparently can help debugging some kernel issues etc. Whatever, I'll take someone's word for that. E: Disks: show block size: logical: physical: 15. New option and configuration item: --partition-sort / PARTITION_SORT This lets users change default mount point sort order to any available ordering in the partition item. Man page and help menu show options. 16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses an immensely stripped down busybox (no ps aux, for example), maybe because it only runs as root user/ not sure, anyway, took many fixes. Changes: 1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number, like 3.1. Note that this is going to be wrong for BSDs, but that's fine. 2. Changed slightly the output of Memory item, now it follows the following rules: A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory: item, which makes sense. Note that -m overrides all other options of where Memory minireport could be located. B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm C: if -I is triggered, and -m is not triggered, Memory: shows in -I line. D: no change in short form inxi no arg output, Memory is there.
2018-09-24 23:50:33 +00:00
\fBPARTITION_SORT\fR Overrides default partition output sort. See
\fB\-\-partition\-sort\fR for options.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBPS_COUNT\fR The default number of items showing per \fB\-t\fR type, \fBm\fR
or \fBc\fR. Default is 5.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBSENSORS_CPU_NO\fR In cases of ambiguous temp1/temp2 (inxi can't figure out
redid patches, I think
2021-08-25 03:39:33 +00:00
which is the CPU), forces sensors to use either value 1 or 2 as CPU
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
temperature. See the above configuration page on smxi.org for full info.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBSENSORS_EXCLUDE\fR Exclude supplied sensor array[s] from sensor output.
Override with \fB\-\-sensors\-default\fR. See \fB\-\-sensors\-exclude\fR.
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
\fBSENSORS_USE\fR Use only supplied sensor array[s]. Override with
\fB\-\-sensors\-default\fR. See \fB\-\-sensors\-use\fR.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBSEP2_CONSOLE\fR Replaces default key / value separator of '\fB:\fR'.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Big set of changes. Full USB refactor, plus added features. Bugs: 1. A result of the issue #156 USB refactor, I discovered that the --usb sort order, which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed by using a second USB hub on a bus, the Device IDs are not really related in any clearly logical way to the actual position on the bus. The solution was to fully refactor the entire USB logic and then use generated alpha sorters based on the full bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1. Note that Device IDs start at 1 for each bus, regardless of how many hubs you have attached to that port. 2. Certain situations triggered a bug in Optical devices, I'd forgotten to change $_ to $key in two places. Since that part didn't normally get triggered, I'd never noticed that bug before. Thanks TinyCore for exposing that glitch! Fixes: 1. On legacy systems, fluxbox --version does not work, -v does. Corrected. 2. for --usb, network devices should now show the correct 'type: Network'. For some weird reason, the people who made the usb types didn't seem to consider many key devices, scanners, wifi/ethernet adapters, and those are almost always "Vendor defined class". 3. A really big fix, for instances where system is using only Busybox, like TinyCore, or booting into any system running busybox for whatever reason, now avoids the various errors when using busybox ps, which only for example outputs 3, not 11, default columns for ps aux, and which does not support ps -j, which is used in the start/shell client information. This gets rid of a huge spray of errors, and actually allows for pretty complete output from systems that only have busybox tools installed. This should cover everything from TinyCore to MIPS to ARM systems that run minimalist Linux. Note that this fix goes along with the /sys based USB parser, since such systems may have USB, but are unlikely to have lsusb installed, but do have /sys USB data. 4. In some cases, strings /sbin/init would trigger a false version result, fixed that logic so now it rarely will do that. Enhancements: 1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile window manager (no version info). 2. Added Bodhi detection; Salix + base slackware; kde neon system base; 3. Added support for slaptget repos, basic, it may not be perfecct. 4. More disk vendors, and matches for existing vendors. 5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines. This makes lsusb optional, though recommended (because it has a better vendor/ product ID to string internal database) than /sys data. This was in response to a second set of issues in #156 by gm10, USB drivers. Depending on the system, using only /sys data, while slightly less informative, is between 20 and 2000 milliseconds faster, so if you want speed, either use the new --usb-sys option, or the configuration file USB_SYS=[true|false] option. 1. switched to cleaner more efficient data structures 2. added ports count to hub report, linux and bsd. 3. added [--usb|-A|-N] -xxx serial for Device items, if present. 4. added --usb -xx drivers, per interface, can be 1 or more drivers. 5. fully refactored -A and -N usb device logic, far cleaner and simple now, much easier to work with, no more hacks to find things and match them. 6. USB type: now comes from /sys, and is in general going to be more accurate than the lsusb -v based method, which was always an ugly and incomplete hack. As with drivers, it also now lists all the interface types found per device, not just the first one as with the previous method. Note that HID means the more verbose: Human Interface Device, but I shortened it. Now that the type: data is created by inxi reading the class/subclass/protocal IDs, and then figuring out what to do itself, I can have quite a bit more flexibility in terms of how type is generated. 7. added --usb -xxx interfaces: [count] for devices, which lists the device interface count. This can be useful to determine if say, a usb/keyboard adapter is a 2 interface device. Note that Audio devices generally have many interfaces, since they do more than 1 thing (audio output, microphone input, etc.). 8. Support for user configuration file item: USB_SYS=[true|false]. This is useful if you want to see only the /sys version of the data, or if you want the significant speed boost not using lsusb offers, particularly on older systems with a complex USB setup, many buses, many devices, etc. New option --usb-tool overrides USB_SYS value, and forces lsusb use. 9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb. Note that you still have to use the feature options, like --usb, -A, or -N. This can lead to a significant improvement in execution time for inxi. 10. Rather than the previous bus:device ID string, to go along with the internal sorting strings used, inxi now shows the real Bus / port /port ids, like: 1-3.2.1:3 - Bus-Port[.port]:device id. 6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore! 7. Added tce package manager to repos. That's the tinycore package manager. Changes: 1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint in issue #156 This makes sense because for a long time, most of these devices are not cards, they are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are some form of a device, and the one thing that they are all not is a Card. Along with the recent change from HDD: to Local Storage in Disks: this brings inxi terminology out of the ancient times and into the present. Thanks for the nudge gm10. Removed: See inxi-perl/docs/inxi-fragments.txt for removed blocks. 1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete the lsusb vendor/product strings. 2. Two functions that were used by -A and -N to match usb devices and get their /sys data, that became redundant since it all now goes through the /sys parser already, so those features can get the data pre-parsed from the @usb arrays. Output Examples: Sort by DeviceID failures in 3.0.20 using Device ID: inxi --usb USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard Device-3: Verbatim bus ID: 1:11 type: Mass Storage Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13 type: Vendor Specific Class Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86 type: Audio Device-6: Canon CanoScan LiDE 110 bus ID: 1:112 type: Vendor Specific Protocol Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113 type: Mass Storage Hub: 2:1 usb: 3.1 type: Full speed (or root) hub Hub: 3:1 usb: 2.0 type: Full speed (or root) hub Hub: 4:1 usb: 3.1 type: Full speed (or root) hub Hub: 5:1 usb: 2.0 type: Full speed (or root) hub Hub: 6:1 usb: 3.0 type: Full speed (or root) hub Corrected: sort by BusID in 3.0.21: inxi --usb USB: Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14 Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4 Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID bus ID: 1-3.2:86 Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage bus ID: 1-3.4:113 Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2 Device-4: Verbatim type: Mass Storage bus ID: 1-7:11 Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3 Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112 Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13 Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8 Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2 Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2 Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4 Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
2018-08-17 22:58:44 +00:00
\fBUSB_SYS\fR Forces all USB data to use \fB/sys\fR instead of \fBlsusb\fR.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBWAN_IP_URL\fR Forces \fB\-i\fR to use supplied URL, and to not use dig
(dig is generally much faster). URL must begin with http or ftp. Note that if
you use this, the downloader set tests will run each time you start inxi
whether a downloader feature is going to be used or not.
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
The IP address from the URL must be the last item on the last (non\-empty)
line of the URL's page content source code.
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
Same as \fB\-\-wan\-ip\-url [URL]\fR
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBWEATHER_SOURCE\fR Values: [\fB0-9\fR]. Same as \fB\-\-weather\-source\fR.
Values 4\-9 are not currently supported, but this can change at any time.
New version, new man page. Big update! Get it in before your freeze!! Bugs: 1. Maybe the vendor/product regex, which when + was used, would put out errors. 2. Maybe Fix 4, since that could lead to incorrect behavior when sudo is involved depending on sudo configuration. 3. BIG: current inxi weather will probably fail if not updated to this or newer versions!! Not an inxi bug per se, but your users will see it as one. Fixes: 1. Fixed Patriot disk ID. 2. Fixes for PPC board handling. 3. Regex cleaner fixes, this could lead to error in special cases of product vendor names. 4. crazy from frugalware pointed out that $b_root detection was flawed, and relied on a bad assumption, particularly for sudo. As usual, he's right, that is now corrected, and uses $< Perl native to determine UID. Enhancements: 1. Added septor to Debian system base. 2. Removed quiet filters for downloaders when using --dbg 1, now you see the entire download action for curl/wget downloads. This went along with issue # 174 3. New feature: --wan-ip-url. This closed issue #174. Also has user config option: WAN_IP_URL as well to make changes permanent. 4. Added --dbg 1 to man and help. The other --dbg options are random and can change, but --dbg 1 is always for downloading, so might as well tell people about it. 5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org based robust API. This also allows for a new switch, --weather-source (or --ws for shorter version), options 0-9, which will trigger different APIs on smxi.org. Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not currently active. Also added in better error handling for weather. The main benefit here is that inxi is now largely agnostic to the weather APIs used, and those can be changed with no impact to inxi users who are running frozen pool inxi's, or who have not updated their inxi versions. NOTE: all inxi versions older than 3.0.31 will probably fail for weather quite soon. So update your inxi version in your repos!! 6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 7. Going along with weather changes, added, if present, cloud cover, rain, and snow reports. Those are for previously observed hour. 8. Small change to Intel CPU architecture, taking a guess on stepping for skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But could not find this documented, so it's a guess. At worst, it means that Cascade lake, which must be a later steppingi than 4, will not be ID'ed as skylake. 9. Documentation updates for data sources. Changes: 1. inxi now uses a new system to get weather data. There is no longer a risk of weather failing if the API used locally in inxi fails or goes away. This change should be largely invisible to casual users. 2. In weather, moved dewpoint to be after humidity, which makes a little more sense.
2019-02-07 02:31:55 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBWEATHER_UNIT\fR Values: [\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR]. Same as
\fB\-\-weather\-unit\fR.
New version, new man. Bug fixes, feature updates. The main reason to release this earlier than I had hoped was because of the /sys permission change for serial/uuid file data. The earlier we can get this fix out, the better for end users, otherwise they will think they have no serial data when they really do. FIXES: 1. this bug just came to my attention, apparently the (I assume) kernel people decided for us that we don't need to see our serial numbers in /sys unless we are root. This is an unfortunate but sadly predictable event. To work around this recent change (somewhere between 4.14 and 4.15 as far as I can tell), inxi -M and -B now check for root read-only and show <root required> if the file exists but is not user readable. I wish, I really wish, that people could stop changing stuff for no good reason, but that's out of my control, all I can do is adjust inxi to this reality. But shame on whoever decided that was a good idea. This is not technically an inxi bug, but rather a regression, since it's caused by a change in /sys permissions, but users would see it as a bug so I consider this an important fix. Note that the new /sys/class/dmi/id permissions result in various possible things: 1. serial/uuid file is empty but exists and is not readable by user 2. serial/uuid file is not empty and exists and is not readable by user 3. serial/uuid file does not exist 4. serial/uuid file exists, is not empty, and is readable by root Does this change make your life better? It doesn't make mine better, it makes it worse. Consider filing a bug report against whoever allowed this regression is my suggestion. BUGS: 1. A weather bug could result in odd or wrong data showing in weather output, this was due to a mistake in how the weather data was assembled internally. This error could lead to large datastore files, and odd output that is not all correct. 2. More of an enhancement, but due to the way 'v' is used in version numbers, the program_version tool in some cases could have sliced out a 'v' in the wrong place in the version string, and also could have sliced out legitimate v values. This v issue also appeared in bios version, so now the new rule for program_version and certain other version results is to trim off starting v if and only if it is followed by a number. FEATURES: 1. Added in OpenBSD support for showing machine data without having to use dmidecode. This is a combination of systcl -a and dmesg.boot data, not very good quality data sources, but it is available as user, and it does work. Note that BIOS systems are the only ones tested, I don't know what the syntax for UEFI is for the field names and strings. Coming soon is Battery and Sensors data, from the same sources. Sadly as far as I know, OpenBSD is the only BSD that has such nice, usable (well, ok, dmesg.boot data is low quality strings, not really machine safe) data. I have no new datasets from the other BSDs so I don't know if they have decided to copy/emulate this method. 2. By request, and this was listed in issue #134, item no. 1, added in weather switchable metric/imperial output. Also added an option, --weather-unit and configuration item: WEATHER_UNIT with possible values: cf|fc|c|f. The 2nd of two in cf/fc goes in () in the output. Note that windspeed is m/s or km/h as metric, inxi shows m/s as default for metric and (km/h as secondary). Also fixed -w observation date to use local time formatting. That does not work in -W so it shows the default value. 3. Updated man to show new WEATHER_UNIT config option, and new --weather-unit option. Also fixed some other small man glitches that I had missed.
2018-05-11 20:53:26 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
.B Color Options
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
It's best to use the \fB\-c [94\-99]\fR color selector tool to set the
following values because it will correctly update the configuration file and
remove any invalid or conflicting items, but if you prefer to create your own
configuration files, here are the options. All take the integer value from the
options available in \fB\-c 94\-99\fR.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
NOTE: All default and configuration file set color values are removed when
output is piped or redirected. You must use the explicit
\fB\-c <color number>\fR option if you want colors to be present in the
piped/redirected output (creating a PDF for example).
New version, man page. Fixes, enhancements, changes. Thanks: 1. AntiX forums, for testing -C --admin, suggestions, always helpful. Bugs: 1. Added switch to set @ps_gui, I forgot case where info block was only thing that used ps_gui (Nitrux kde nomad latte case). This led to no info: data if other ps_gui switches not activated. Now each block that can use it activates it. Fixes: 1. To clarify issue #161 added help/man explanation on how to get colors in cases where you want to preserve colors for piped or redirected output. Thanks fugo. 2. LMDE 3.0 released, slightly different system base handling, so refactored to add Debian version, see enhancement 2. Tested on some old vm instances, improved old system Debian system base id, but it's empirical, distro by distro, there is no rule I can use to automatically do it, sadly. 3. 'Motherboard' sensors field name added, a few small tweaks to sensors. This was in response to issue #159, which also raised a problem I was not really aware of, user generated sensor config files, that can have totally random field names. Longer term solution, start getting data from sys to pad out lm-sensors data, or to handle cases where no lm-sensors installed. 4. Fixed kwin_11 and kwin_wayland compositor print names, I'd left out the _, which made it look strange, like there were two compositors or something. 5. Fixed latte-dock ID, I thought the program name when running was latte, not latte-dock. inxi checks for both now. Thanks Nitrux for exposing that in vm test. 6. Sensors: added in a small filter to motherboard temp, avoid values that are too high, like SYSTIN: 118 C, filters out to only use < 90 C. Very unlikely a mobo would be more than 90C unless it's a mistake or about to melt. This may correct anoymous debugger dataset report from rakasunka. Enhancements: 1. Added --admin to -v 8 and to --debugger 2x 2. Expanded system base to use Debian version tool, like the ubuntu one, that lets me match version number to codename. The ubuntu one matches code names to release dates. Added Neptune, PureOS, Sparky, Tails, to new Debian system base handler. 3. Big enhancement: --admin -C now shows a nice report on cpu vulnerabilities, and has a good error message if no data found. Report shows: Vulnerabilities: Type: [e.g. meltdown] status/mitigation: text explanation. Note: 'status' is for when no mitigation, either not applicable, or is vulnerable. 'mitigation' is when it's handled, and how. Thanks issue #160 Vascom from Fedora for that request. 4. The never-ending saga of disk vendor IDs continues. More obscure vendors, more matches to existing vendors. Thanks linuxlite/linux hardware database Changes: 1. Reordered usb output, I don't know why I had Hubs and Devices use different ordering and different -x switch priorities, that was silly, and made it hard to read. Now shows: Device/Hub: bus-id-port-id[.port-id]:device-id info: [product info] type/ports: [devices/hubs] usb: [type, speed] -x adds drivers for devices, and usb: speed is now default for devices, same as Hubs. Why I had those different is beyond me. The USB ordering is now more sensible, the various components of each matching whether hub or device. Unfixable or Won't Fix: 1. Unable to detect Nomad desktop. As far as I can tell, Nomad is only a theme applied to KDE Plasma, there is no program by that name detectable, only a reference in ps aux to a theme called nomad. 2. Nitrux system base ID will not work until they correct their /etc/os-release file. 3. Tails live cd for some inexplicable reason uses non standard /etc/os-release field names, which forces me to either do a custom detection just for them, or for them to fix this bug. I opted for ignoring it, if I let each distro break standard formats then try to work around it, the distro ID will grow to be a 1000 lines long easily. Will file distro bug reports when I find these from now on. Samples: This shows the corrected, cleaned up, consistent usb output: inxi -y80 --usb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID usb: 1.1 Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse usb: 1.1 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse usb: 1.1 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> usb: 2.0 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network usb: 2.0 Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 inxi -y80 --usb -xxxz USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0 chip ID: 1d6b:0002 Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 chip ID: 03eb:0902 Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) type: Audio,HID driver: cm109,snd-usb-audio interfaces: 4 usb: 1.1 chip ID: 0d8c:000e Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse driver: usbhid,wacom interfaces: 1 usb: 1.1 chip ID: 056a:0011 Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 usb: 1.1 chip ID: 0d3d:0001 Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific> driver: N/A interfaces: 1 usb: 2.0 chip ID: 04a9:1909 Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network driver: asix interfaces: 1 usb: 2.0 chip ID: 05ac:1402 serial: <filter> Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1 chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0 chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1 chip ID: 1d6b:0003 Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0 chip ID: 1d6b:0002 Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0 chip ID: 1d6b:0003
2018-09-07 20:58:55 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBCONSOLE_COLOR_SCHEME\fR The color scheme for console output (not in
X/Wayland).
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBGLOBAL_COLOR_SCHEME\fR Overrides all other color schemes.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBIRC_COLOR_SCHEME\fR Desktop X/Wayland IRC CLI color scheme.
\fBIRC_CONS_COLOR_SCHEME\fR Out of X/Wayland, IRC CLI color scheme.
\fBIRC_X_TERM_COLOR_SCHEME\fR In X/Wayland IRC client terminal color scheme.
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
\fBVIRT_TERM_COLOR_SCHEME\fR Color scheme for virtual terminal output (in
X/Wayland).
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH BUGS
Please report bugs using the following resources.
decided have skills to edit
2012-09-15 09:18:08 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
You may be asked to run the inxi debugger tool (see \fB\-\-debug 21/22\fR),
which will upload a data dump of system files for use in debugging inxi. These
data dumps are very important since they provide us with all the real system
data inxi uses to parse out its report.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.B Issue Report
File an issue report:
New version, new tarball: Changes: updated inxi updaters to use github locations. I will do this commit once for googlecode, and once for github, after that, all commits will go only to github. inxi moves to github, despite my dislike of for profit source repos, and git, I decided that I just don't have the time or energy to do it right, so I'm going to use github. The project is already moved, though I have left inxi up for the time being on code.google.com/p/inxi until I move the wiki to http://smxi.org Everything is pretty much the same, the project url is: https://github.com/smxi/inxi The direct download link for the gz is: https://github.com/smxi/inxi/raw/master/inxi.tar.gz git pull is: git pull https://github.com/smxi/inxi master svn checkout url: https://github.com/smxi/inxi And that's about it.
2015-08-20 23:32:57 +00:00
.I https://github.com/smxi/inxi/issues
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New features, new changes, new bug fixes!!! Excitement!!! Thrills!!! Bugs: 1. Forgot to set get Shell logic in inxi short form, oops, so Shell remained blank, only inxi short, which I rarely use so I didn't notice. 2. Failed to test pacman-g2 for packages, had wrong query argument, so it failed. Also failed to test for null data, so showed errors for packages as well. Both fixed. 3. A big bug, subtle, and also at the same time, an enhancement, it turns out NVME drives do NOT follow the age old /proc/partitions logic where if the minor number is divisible by 16 or has remainder 8 when divided by 16, it's a primary drive, not a partition. nvme drives use a random numbering when > 1 nvme drives are present, and the old tests would fail for all nvme drivers more than the first one, which led to wrong disk size totals. Thanks gardotd426 who took the time to help figure this out in issue #223 - fix is to not do that test for nvme drives, or rather, to add a last fail test for nvme primary nvme[0-9]n[0-9] drive detections, not the minor number. Fixes: 1. Corrected indentation for block sizes, children were not indented. 2. Updated some older inxi-perl/docs pages, why not, once in a while? 3. Kernel 5.8 introduces a changed syntax to gcc string location, this has been corrected, and the kernel gcc version now shows correctly for the previous syntax and the new one. Hopefully they do not change it again, sigh... 4. Removed string 'hwmon' sensors from gpu, those are not gpu sensors, and are also usually not board/cpu sensors, but things like ath10, iwl, etc, network, or disk sensors, etc. In some cases hwmon sensor data would appear Enhancements: 1. Big sensors refactor, now inxi supports two new sensors options: --sensors-exclude - which allows you to exclude any primary sensor type[s]. Note that in the refactored logic, and in the old logic, gpu sensors were already excluded. Now other hardware specific sensors like network are excluded as well. --sensors-use - use ONLY list of supplied sensor IDs, which have to match the syntax you see in lm-sensors sensors output. Both accept comma separated list of sensors, 1 or more, no spaces. The refactor however is more far reaching, now inxi stores and structures data not as a long line of sensors and data without differentiation, but by sensor array/chip ID, which is how the exclude and use features can work, and how granular default hardware sensor exclusions and uses can happen. This is now working in the gpu sensors, and will in the future be extended to the newer 5.7/5.8 kernel disk temperature sensors values, which will lead in some cases to being able to get sensors data for disks without root or hddtemp. This is a complicated bit of logic, and I don't have time to do it right now, but the data is now there and stored and possible to use in the future. To see sensors structures, use: inxi -s --dbg 18 and that will show the sensors data and its structures, which makes debugger a lot easier for new features. This issue was originally generated by what was in my view an invalid complaint about some inxi sensors defaults, which led me to look more closely at sensors logic, which is severely lacking. More work on sensors will happen in the future, time, health, and energy permitting. 2. Added Watts, mem temp, for amdgpu sensors, as -sxxx option. More gpu sensor data will be added as new data samples show what will be available for the free modules like amdgpu, nouvean, and the intel graphics modules. 3. More disk vendors and IDs, as noted, the list never ends, and it hasn't ended, so statement remains true. Thanks linux-lite hardware database. Changes: 1. This has always bugged me since it was introduced, the primary cpu line starter Topology: which was only technically accurate for its direct value, not its children, and also, in -b, cpu short form was using the value as the key, which is a no-no, I'd been meaning to fix that too, but finally realized if I just make the primary CPU line key be 'Info:', which is short, yet non-ambiguous, it would solve both problems. To keep the -b cpu line as short as before, I removed the 'type:' and integraged that value into the primary Info: string: CPU: Info: 6-Core AMD Ryzen 5 2600 [MT MCP] speed: 2750 MHz min/max: 1550/3400 MHz -b 3.1.05 and earlier: CPU: 6-Core: AMD Ryzen 5 2600 type: MT MCP speed: 1515 MHz min/max: 1550/3400 MHz These resolve something that has irked me for quite a while, 'Topology:' didn't fit, it was too geeky, and worst, it only applied to the value directly following it, NOT to the rest of the CPU information. It also could not be shortened or abbreviated since then it would have made no actual sense, like topo:, and the same issue with value being used for key in -b, and wrong word for line starter in -C would have existed. Besides, someone might think I was trying to make a subtle reference to the great Jodorowsky film 'El Topo', which would be silly, because that's art, and this is just some system specs that are reasonably readable... 2. Was using opendns for WAN dig IP address, but apparently cysco bought that company, and now I've noticed the old opendns dig queries were failing more and more, so replaced that with akamai dig requests. Also made the WAN IP fallback to HTTP IP method if dig failed. New option: --no-http-wan and config item NO_HTTP_WAN with override --http-wan added to let you switch off http wan IP requests if you want. Note that if dig fails, you will get no wan ip address. Updated/improved error messages to handle this more complex set of wan ip options, so hopefully the error alert message will in most cases be right. 3. To future proof inxi, switched debugger upload location to ftp.smxi.org/incoming from the old techpatterns.com/incoming. Updated man/help to remove those urls too.
2020-08-16 22:27:11 +00:00
.B Forums
Post on inxi forums:
.I https://techpatterns.com/forums/forum\-33.html
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.B IRC irc.oftc.net#smxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
You can also visit
.I irc.oftc.net
\fRchannel:\fI #smxi\fR to post issues.
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH HOMEPAGE
New version, new tarball: Changes: updated inxi updaters to use github locations. I will do this commit once for googlecode, and once for github, after that, all commits will go only to github. inxi moves to github, despite my dislike of for profit source repos, and git, I decided that I just don't have the time or energy to do it right, so I'm going to use github. The project is already moved, though I have left inxi up for the time being on code.google.com/p/inxi until I move the wiki to http://smxi.org Everything is pretty much the same, the project url is: https://github.com/smxi/inxi The direct download link for the gz is: https://github.com/smxi/inxi/raw/master/inxi.tar.gz git pull is: git pull https://github.com/smxi/inxi master svn checkout url: https://github.com/smxi/inxi And that's about it.
2015-08-20 23:32:57 +00:00
.I https://github.com/smxi/inxi
New version, new man. Fixes, stitches, and returns!! Bugs: 1. As a fix (3), failure to handle spaces in mount source names. More of a fix than a bug, since it was an old issue #63. 2. OSX errors, BSD errors, but not really inxi errors or bugs, more weird data tripping null data or unreadable file errors, but I'll call those bugs since they look like bugs to end users. See Fixes for more. 3. See Fix 4, this is sort of a bug, inxi failed to return expected values on success/failure. Fixes: 1. One of the documented config items, COLS_MAX_NO_DISPLAY had not been implemented internally. This is now corrected. 2. Apple OSX was returning errors, those were fixed. 3. Finally handled ancient issue #63, support now there for spaces in remote source name. This means that both spaces in source block name, and mount point name, are in theory both handled now. This was also to fix an osx issue #164 despite the fact that technically I do not support osx beyond fixing errors, but since in this case the issue was a long standing one, I fixed it for everything. 4. Big fix, I'd completely left undone proper unix type error number returns in inxi, oops. Thanks Unit193 for noticing that and prompting me to fix it. Now inxi returns integer success/error numbers as expected. 5. OSX xml based version info broke, of course, naturally it would, so I added in an osx fallback where if no distro version detected, use fallback unix method, which is what all the other unices use. 6. Along with space in source name, fixed mapped handling a bit more too for partitions. 6. Added cifs remote file system to disk size used blacklist, and iso9660. Not sure how I'd missed those for so long. 7. OpenBSD vmstat in 6.3 changed the column order for avm/fre, and changed to a, sigh, human readable default format, in M, so to handle this for all bsds, I had to make a dynamic column detection for avm and fre, and use those after, and also i had to add in a M detection, if found, *1024 and strip out M, sigh. 8. OpenBSD, another alternate ordering/syntax issue, the dmesg.boot data for disks does not always use the same order in comma separated list, saw user case where the first item after : was the MB size, not the second. Made detection dynamic. 9. Due to Android case, found types where no cpu speed data was found, no max speed at least, which tripped an error due to null data for ARM, this is now handled, now cpu speed min/max read permissions in /sys are checked first before trying to read, and default failures are better handled. 10. On man page, added in clarification of the moving of Memory: item from Info: line to ram Memory: line, explaining when it appears where. I do not removing the item from -I, I may revert that change, I find it non-intuitive to move that around. Enhancements: 1. Added display manager Ly, plus Ly version number. Thanks NamedKitten, this closes issues #166 #165 #162 2. Improved documentation a bit to avoid ambiguity re how to get colors in output. That handles issue #161, thanks fugo for the nudge to improve the documentation. 3. First inxi on Android tests, using termux, which has a debian based apt type installer, got inxi running on at least two devices, including pixel2, but discovered that apparently as of android 5, /sys is now locked up in terms of wildcard reads, but further analysis is required, but as of now, inxi works in termux, but fails to get any Device data for A, G, or N. Thus it also fails to match IF to Device, so none of the IP data shows up. The latter will probably be fixed since Android has ip and ifconfig already, or termux does, but so far I found no way to get device data for ARM in Android 5.x and greater (checked on android 7 and 9 in real phones). 4. More disk vendors!! thanks linuxlite / linux hardware database for offering an apparently never ending list of obscure and not so obscure disk vendors and products. 5. While I was unable to get confirmation or documentation on file names for tce repo files, I guessed that localmirrors would be used, but this may be any random text file in /opt at all, no extensions, I'd have to test to confirm or deny possible values. 6. To handle more complex debugger failures, added --debug-no-proc, --debug-no-exit, to skip or enable completion where proc or sys debugger is hanging. Changes: 1. Changed vendor in A, G, and N to -x, not -xxx, this data seems much more useful and reliable than I'd first expected when I made the feature, the -xxx was more an indication of my lack of trust in the method and source, but so far it seems pretty good, so I bumped it up to an -x option. Note that also, it's quite useful to know the vendor of, say, your network or graphics card, not just the actual device internal data, which is all inxi has ever shown previously. 2. Small change, if no partition type data is found, dev, remote, mapped, default now says 'source:' instead of 'dev:' which makes more sense. Note that df calls that column 'source', so I decided to go with their language for the default not found case. Also changed mapped to say mapped. This was part of a bit of a refactor of the partition type logic, enhanced by adding mapped to existing types, and moved the entire type detection block into the main data generator, and out of the data line constructor. Optimizations: 1. Tested, and dumped, List::Util first() as a possible way to speed up grep searches of arrays, where the goal is just to see if something is in an array. My expectation was that first(), returning the first found instance of the search term, would of course be faster since it will always exit the search loop was met with the sad fact that first() is about 2 to 4 times SLOWER than grep() native builtin. I tested this fairly carefully, and used NYTProf optimizer tool and the results were totally consistent, first() was always much slower than grep(), no matter what size the array is. I assume this means the core C programming that makes grep is simply much better than the File::Util module programming that makes first(). Removed first() and now know that nothing will be faster than grep so no need to look there for speed improvements. The moral of the story: just because something should in theory be faster, does sadly not mean it will be faster, for there are bigger things at work, skill of the programmers who made the logic, how perl handles external vs internal tools, and so on. As an aside, this forms a fairly consistent pattern where I've found Perl by itself to be faster than modules in many cases, that is, it's faster to write the code out than to use a module in many cases that I have tested, so I will always test such ideas and dump every one that is in fact slower than native Perl builtins.
2018-10-14 23:16:06 +00:00
.I https://smxi.org/docs/inxi.htm
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH AUTHOR AND CONTRIBUTORS TO CODE
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.B inxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
is a fork of \fBlocsmif\fR's very clever \fBinfobash\fR script.
decided have skills to edit
2012-09-15 09:18:08 +00:00
Original infobash author and copyright holder:
redid patches, I think
2021-08-25 03:39:33 +00:00
Copyright (C) 2005\-2007 Michiel de Boer aka locsmif
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page, bug fixes, changes, adjustments and cleanups!!! Special thanks to mr. mazda for his ongoing suggestions, ideas, and observations. Bugs: 1. In certain corner cases, it appears that lsusb has blank lines, which tripped errors in inxi output when the usb parser was trying to access split keys that did not exist. Added in check to make sure split actually resulted in expected data. 2. A red face bug, I'd left the output debugger switched on with json output, so it was printing out the json data structure with Dumper, that's now switched off. Hope this doesn't mess anyone up, but it would have mattered only if the person was using: --output json --output-type print It did not effect xml output. Fixes: 1. Got rid of extra level of -L data structure and output handler. Not visible to users, but still irksome, so nice to get that fixed. Recursive structures are confusing, lol, but this extra level was pointless, but to fix it required redoing the logic a bit for both data generator and output feature. 2. Added in support for --display :0.0, previously it did not support the .0 addition, but why not, if it works for people, good, if not, makes no difference. 3. There were some missing cases for LVM missing data messages, so the following fixes were added: * In cases where lsblk is installed and user is non root, or lvs is not installed, but no lvm data is present, inxi now shows the expected 'Message: No LVM data found.' instead of the permissions or missing program error that showed before. If lsblk is not installed, and lvm is installed (or missing), with lvs not root readable, the permissiosn message (or missing program) will show since at that point, inxi has no way to know if there is lvm data or not. * Not an inxi, but rather an Arch Linux packaging bug, the maintainer of lvm has made lvs and vgs fail to return error number on non root start, which is a bug (pvs does return expected error return). Rather than wait for this bug to be fixed, inxi will just test if lvs and lsblk lvm data, it will show permissions message, otherwse the no lvm data message as expected. I think these cover the last unhandled LVM cases I came across, so ideally, the lvm data messages will be reasonably correct. 4. Some man page lintian fixes. 5. Changed usb data parser to use 'unless' instead of 'if' in tests since it's easier to read unless positive tests are true than if negative or negative etc. Enhancements: 1. Since I see too often things like -F --no-host -z which is redundant, the help and man now make it more clear that -z implies --no-host. 2. Even though it's not that pointful, I added in derived Arch Linux system base like Ubuntu/Debian have. It's not that meaningful because unlike Ubuntu/Debian, where you want to know what version the derived distro is based on, Arch is rolling thus no versions, but I figured, why not, it's easy to do, so might as well make the system base feature a bit more complete. Note that the way I did this requires that the distro is ID'ed as its derived distro nanme, not Arch Linux, that will vary depending on how they did their os-release etc, or distro files, but that's not really an inxi issue, that's up to them. From what I've been seeing, it looks like more of the derived distros are being ID'ed in inxi as the derived name, so those should all work fine. Note that seeing 'base:' requires -Sx. 3. More disk vendors!! More disk vendor IDs!!! I really dug into the stuff, and refactored slightly the backend tools I use, so it's now a bit easier to handle the data. Thanks linux-lite hardware database, as always, for having users that really seemt to use every disk variant known to humanity. Changes: 1. In -G, made FAILED: lower case, and also moved it to be after unloaded: It was too easy to think that the loaded driver had failed. Also to make it more explicit, made output like this, in other words, driver: is a container for the possible children: loaded: unloaded: failed: alternate: which should be easier to parse and read without mixing up what belongs to what. driver: loaded: modesetting unloaded: nouvean,vesa alternate: nv driver: loaded: amdgpu unloaded: vesa failed: ati Note that if there is no unloaded: driver, failed: would still appear to come after loaded:, but hopefully it's more clear now. Basically what we found was that the presence of the uppercase FAILED: drew the eye so much that it was sometimes not noted that it was a key: following the driver: item, which itself because it did not list explicitly loaded: was not as clear as it could have been. By making failed: the same as the other key names visually, hopefully it will be less easy to think that the loaded: driver failed: In a sense, this is a legacy issue, because the original use of FAILED: was for non free video drivers, to see when xorg had failed to load them, but over more recent years, the most frequent thing I have been seeing is odd things like failed: ati, when xorg tries to load the legacy ati driver when amdgpu is being used. 2. Likewise, for RAID mdraid and zfs changed FAILED: to Failed:, again, to make it more consistent with the other types. 3. In help menu and man page, removed legacy 'card(s)' in -A, -G, -N, and replaced that with 'device(s)', which is the more accurate term, since the days when these things were only addon cards are long behind us. I had not noticed that, but it caught me eye and I realized it was a very deprecated and obsolete syntax, which did not match the way inxi describes devices today. 4. It was pointed out how incoherent the naming of the item for setting wrap width, --indent-min and config item INDENT_MIN were super confusing, since it was neither indent or minimum, it was in fact wrap maximum, so the new options and config items are --wrap-max and WRAP_MAX. Note that the legacy values will keep working, but it was almost impossible in words to explain this option because the option text was almost the exact opposite of what the option actually does. Redid the man and help explanations to make the function of this option/config item more clear. 5. Made -J/--usb Hub-xx: to fit with other repeating device types in inxi output, before Hub: was not numbered, but it struck me, it should be, like all the other auto-incremented counter line starters, like ID-xx:, Device-x:, and so on. 6. Reorganized the main help menu to hopefully be more logical, now it shows the primary output triggers, then after, the extra data items, -a, -x, -xx, -xxx, separated by white space per type to make it easier to read. This also moved the stuff that had been under the -x items back to where they should be, together with the main output control options. For readability and usability, I think this will help, the help menu is really long, so the more visual cues it has to make it clear what each section is, the better I think. Previously -a was the first items, then way further down was -x, -xx, and -xxx, then under those was -z, -Z, -y.
2021-01-11 03:20:21 +00:00
inxi version: Copyright (C) 2008\-2021 Harald Hope
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
This man page was originally created by Gordon Spencer (aka aus9) and is
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
maintained by Harald Hope (aka h2 or TechAdmin).
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Initial CPU logic, konversation version logic, occasional maintenance fixes,
and the initial xiin.py tool for /sys parsing (obsolete, but still very much
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
appreciated for all the valuable debugger data it helped generate):
Scott Rogers
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Further fixes (listed as known):
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
Horst Tritremmel <hjt at sidux.com>
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Steven Barrett (aka: damentz) \- USB audio patch; swap percent used patch.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Jarett.Stevens \- \fBdmidecode \-M\fR patch for older systems with no
\fB/sys\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.SH SPECIAL THANKS TO THE FOLLOWING
Huge refactor of CPU physical/core/cache logic. That was some very old logic with a lot of hacks and patches, but it had never been actually rewritten to take advantage of Perl's far more powerful and robust data structures and logic. This caused a continuous stream of error cases in subtle ways, or not so subtle, and fixes were just changing how the errors manifested. Tnanks very much to linuxquestions.org Slackware forum people for massive help, and also to linux.org forum members for ongoing help and data and debugging. Note Changes 5, change of default widths in display to 80 columns, and out (aka, console, or ssh into remote system), 100. You can still use other widths if you like something wider using the configuration options shown. Also upped max columns wrapping line starters to own rows to 110 columns from 90, again the idea being to make output more readable to other users when posted in public. I've been thinking of this change for a long time, but was hoping -y would register with users, but it hasn't gained enough traction, so the result is way too many super hard to read issue reports, forum posts, linux kernel issues, etc, it's honestly gotten sort of embarrassing because they make it look like inxi has bad output. Sidescrolling code blocks in forums in particular are absurdly hard to read and scan rapidly for data. Going along with the width and indentation changes, for most main row types, if they wrap to a second row, they are further indented 2 column2, to make it easier to see what they belong to. The two levels of indentation contain more useful visual cues as to what belongs to what. There was a temptation to release this as either 3.4.00 or 4.0.00 but in the end, I decided to follow the numbering rules, and to just roll it to 3.3.10 since there aren't really any primary new features even though CPU was basically rewritten in large part, and big parts of inxi were also changed, upgraded, and enhanced. But no truly new features, just some display control items like -Y, --indent, --indents. I hope this refactor meets its primary goals, and that the new defaults for display help resolve public posting issues which have grown increasingly annoying for anyone trying to read those pasted in too long outputs. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. Android seems to have CPU cache data, but does not show any 'size' item. But it does have the other data for each cache type internally, which is odd. 2. In some instances, the parent key:value pairs with '' as value, those are parents of children key:value pairs, are left hanging at end of line, with the children on the following line. This can look awkward, but in other cases, actually looks very good, it depends if it's at the start or end of the line. I won't say this is not correctable, but it would be very difficult, and outside the scope of this release, but that is something that I may look at for a future release now that the output generator logic was reworked slightly for Change 5b. It's tricky though, because in cases where it's the first item on the line, you want that behavior, but when it's last, you don't. But this may be worth revisiting in the future. 3. In some cases, -Y + -y1 may lead to the start of the block scrolling off the top of the visible screen. This isn't really correctable, so if that's an issue for you, just don't use -y1 with -Y and all the output will wrap nicely. 4. There is an unaccountable ~10-20ms delay reading cpufreq/scaling_cur_freq, per thread/core, which really adds up on high thread count CPUs. There is a workaround in inxi to use cpufreq_cur_freq if it is readable, ie, if you are root or use sudo, but to fallback to scaling_cur_freq if can't read cpuinfo_... This is a drag, and really looks like a kernel bug, or a frequency driver bug. -------------------------------------------------------------------------------- BUGS: 1. 3.3.09 and 3.3.10 CPU bug fixes: * Failed to filter out certain virtual machine CPU core speeds, and showed more speeds than the instance actually has. Noticed this with KVM running on Xeon CPUs. * For many cases, L2 cache, particularly for Intel, was completely wrong, it was showing L3 caches, or L3+L2. Failed to handle cases where L2 cache belongs to more than 1 core, except for using a crude hack for AMD Bulldozer microarch. Older Intel Core 4 core CPUs would sometimes be 1 L2 per die, and the 4 cores were actually 2 core duo cpu dies, with one L2 cache per die. * Shows wrong core count for complex core complexes like those found in Intel Alder Lake, now shows correct count of actual cores, regardless of the MT or ST state of each core. * Showed invalid L3 cache values in some legacy cpus that had no L3 cache, that is due to a bug in the dmidecode data itself. Solution is to never use dmidecode cache data if any other valid L1, L2, or L3 cache data found for Linux, and to only use dmidecode data for bsds if no L1, or L2, or L3 data found. Or if forced with --dmidecode. 2. An unfortunately long standing bug found and fixed, thanks slackware users! cp_cpu_arch was, and has been for a while, failing to convert hex stepping to decimal, or test if the string it gets is even a possible hex value, this resulted in all Intel CPUs with stepping > 9 failing to ID correctly for cpu arch. 3. In a related bug, hex to decimal tool used to create --admin hex/decimal output for family/model/stepping was also not testing if the string was an actual valid hex number. Case in particular, power pc with revision field contained a long string, which was of course not a valid hex number, and that tripped a Perl error when it was asked to convert a non hex string to decimal. 4. Long standing bug found while doing Change 5: inxi actually never applied separate in/out of dispay to widths because using a legacy boolean that was not updated, so it was always using out of display widths. -------------------------------------------------------------------------------- FIXES: 1. Incorrectly calling PowerPC 'revision' 'stepping' for -Ca, that is now stored as $cpu{'revision'} to avoid mixing up the logics there. For PowerPC shows as rev: [string]. 2. Microarch: * AMD family 15, model 2 as bulldozer, actually piledriver. * AMD family 17, model 18, was supposed to be zen/zen+, since I can't tell those apart, seen stepping 1 is zen+, but had incorrect match. * Intel family 6, model 25, stepping 2 as nehalem, should have been westmere. * Changed Penryn to Core Penryn, intel family 6, model 17 * misc other micro arch fine tunings. 3. Code fix 8, switched to global %risc for arm, mips, ppc, riscv, sparc. This corrects many sloppy handlers, and makes all risc processing the same, and calls device tree readers for all risc systems, not just arm or arm and mips. 4. In cases where bogomips were 0 due to false values in risc results, show N/A. 5. Removed all attempts to guess at what /proc/cpuinfo cache size: refers to, it can literally be anything, a per core L1, a per core or cpu L2, or an L3. So applying any math to it is just a random guess at that point. If any L1,2,3 cache data is found, don't use the cache: value at all, but that will only be present if no /sys data was found anyway, and if cpuinfo had no specific cache type fields, only generic cache. 6. Added failsafe tests for stepping and model id before doing conversion to hex. Make sure integer! 7. Added L1 D cache, was only using I cache for BSDs. Output will show total for L1 A + L1 D. No idea why I didn't use L1 D, makes little sense, but that's how it goes. 8. Made bogomips tests more granular, now only rejects low sub 50 bogomips values if %risc cpu type. Legacy ancient cpus like 486 could and did have bogomip counts below 50. https://tldp.org/HOWTO/BogoMips/bogo-list.html 9. See Enhancement 12 as well. If OpenBSD, which has no per core data or physical cpu data, is running on MT capable cpu, but for security OpenBSD has disabled MT, will now force MT to be not shown via the hw.smt value. This removes a small glitch that would have bothered OpenBSD users who know that OpenBSD has disabled MT for security purposes. 10. Changed BSD hack to use L2 cache totals to deduce > 1 physical cpus, that was flat out dumb, since we can just use dmidecode type 4 to iterate physical cpu counts and skip the pointless logic. Thus, if dmidecode, and if > 1 dmidecode type 4 found, and if physical cpu counts equal 1, then replace the found counts with the dmidecode physical cpu counts. 11. Corrected bad assumption that threads would always be 2 per core for MT tests. Still no way to reliably determine threads per core for non x86 cpus like powerpc however, but those are very fringe and should rarely be an issue since that data is only missing on very old linux now I think. 12. Fixed 'parameters:' going to its own line with -Sa, that wasn't supposed to. -S is two lines, the kernel / host stuff, and the desktop/console/distro stuff. 13. Fixed case when key: value first word plus other parts of line longer than max width, failed to wrap as expected. 14. Added start/end ' and " start / end \s to main filters. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. CPU: most Linux will now show L1 and L3 cache with -Cx without needing sudo/root, and it will be more accurate than ever before. 2. CPU: shows per CPU L1/L2/L3 totals, and shows actual full system physical processor count * L1/L2/L3 total in parentheses, like: L2: 1.5 MiB (3 MiB). 3. CPU: A long standing annoyance, previously for main CPU 'Speed:' item, showed the fastest core speed found, now shows avg: [speed] and with -Cx, shows the 'high:' as well if > 1 cores, and if 1 or more cores have a higher speed than the other(s). 4. CPU: Handles advanced cases of new architectures, like Alder Lake with Performance and Efficiency cores, future Zen, and existing ARM CPUs with 2 or more different core sets, with different max/min frequencies. Previously a hack was used to handle only ARM CPUs with this type of architecture. Will show correct CPU core counts, which previous inxi versions would fail to do for Alder Lake type scenarios of 8 single threaded CPUs and 4-8 multithreaded )MT) perforance cores. This should also in theory show different the different min/max speeds if they were detected. Those did not seem to be set correctly in Alder Lake sample data I saw however, P and E cores were set to the same min/max speeds. 5. Added CPU types MST (Multi+Single Thread), AMP (Asymmetric Multi Processing), and AMCP (Asymmetrical Multi Core Processor). This will be applied to any CPU that has this type of complex topology that has been dynamically detected, like Alder Lake or different core count or min/max speed RISC CPUs. 6. CPU: shows with -Ca for cases where different L1/L2/L3 caches found per physical CPU, as with Alder Lake, but also many other variants that were poorly or not at all handled before, how many of each cache type (L1 Data, instruction) were found, otherwise will show how many of each cache were found. 7. CPU: shows with -Ca in Topology: report, for cases like Alder Lake with different core types in one physical CPU (type: MST AMCP), the number that are single threaded (st) and number that are multi-threaded (mt). 8. Basic support for rsyc-v systems, going along with code fix 8, fix 3, now it's easy to add this type of support. 9. Added shortcut options for --filter-label (--zl), --filter-uuid (--zu), and andded new filter option, --filter-vulnerabilities (--zv). The latter is added by request, a decent idea to have option to not show cpu vulnerabilities. 10. Going with fix 7, switched to a sort of pseudo L1 d/i with desc report for any BSD with L1 I/D cache found, or elbrus cache0 (icache) / cache1 (d cache). Elbrus should hopefully be handled by the /sys tool. Guesses on the L1 are ok, since those are almost always per core, so it's fine. Didn't expect to enhance any BSD cpu data this time around, but there you go!! If they have the data, then it will be used. Not going to go overboard though in that, quite useless overall since usually can't see how many CPUs are present, at least not usually. 11. For -Ca, full CPU topology report if any complex topogy is detected, otherwise shows the same basic Info: 2x 6-core or Info: dual core as before, no point in wasting a line for something with no more data than the short string. Complex types include MT CPUs since they will have different thread counts etc, and will have 2 or more threads per core, which will also be listed. 12. If smt status is defined (0/1), shows smt: enabled|disabled in Topology section, can be useful for systems with disabled MT, but supporting it. If no topology data found (OpenBSD for example), for -C shows 'smt: disabled' after 'type:' section, and enabled if -Cxxx (since MT really already tells you that). 13. For -Ca Speed: report, added 'governor:' item, if found. Can show 1 or more active governors. 14. Output height (in lines) control: -Y [-2|-1|0|1-xxx]]. This lets you break up any of the output into whatever number of lines you want. Also useful out of DISPLAY for reading -h options menu items etc. It came tp my attention that the long standing shift+pgup/pgdown (aka 'softscrollback) behavior had stopped working, and in fact has been removed from the current Linux kernel, at least until it is rewritten to be more clean and understandable. Read more about it in these kernel post/commit messages: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=50145474f6ef4a9c19205b173da6264a644c7489 https://lwn.net/ml/linux-kernel/CAHk-=whe4ZdTdCebneWqC4gSQZwsVJ5-Emg0BucOGCwPhOAJpw@mail.gmail.com/ Options for -Y are: * -Y 0 or -Y: Set maximum block height to terminal line height. * -Y [1-xxx]: Set maximum block line height to given integer. * -Y -1: Print out one primary data block item at a time, with -F for example. * -Y -2: Restore default unlimited height if LINES_MAX configuration item used. 15. And finally, more disk vendors/vendor ids. As usual. As expected. -------------------------------------------------------------------------------- CHANGES: 1. If /sys or /proc/cpuinfo speed data available: * For -b CPU item: speed: [speed MHz] min/max: [min]/[max] MHz becomes: speed (MHz): avg: [speed] min/max: [min]/[max] * For -C, Speed item Speed: [speed MHz] min/max: [min]/[max] MHz Cores (MHz): ... becomes: Speed (MHz): avg: [speed] min/max: [min]/[max] cores: ... * For short form, shows speed/min/max but uses average speed if available. For -b and -C, only shows one MHz in Speed line starter, which slightly shortens the line even with the added 'avg:' item since 3 MHz are replaced with 1. 2. Going with change 1, now the 'avg:' item shows not the fastest cpu speed found, which was the case before, but shows an average of all cpu speeds found. Showing the fastest made some sense back in the days of single core, or even dual core CPUs, but makes little sense today with many core/threaded cpus. With -x, it will show the high: [speed] item as well, after 'avg:'. 3. By suggestion, wrapped first Type item in Vulnerabilities to its own line, that's a verbose --admin option after all, no need to save lines! 4. Going along with Fix 5, give up on trying to pretend we can guess at L2 cache, now if only 'cache' data was available from cpuinfo, will just say: cache: [cache size] note: check and call it a day. 5a. Change default width to 80 columns, in and out of display. Too many users are posting horribly wrapping inxi output in forums, issue trackers, etc, and it frankly makes inxi look really bad, creates awful side scrolling code boxes, etc. So now default widths in and out of console are 80 (since often data is generated in SSH or out of X/Wayland) for issues. This essentially makes -y 80/-y the default width. This is what I've been using for a few years now, and after seeing far too many side scrolling or badly wrapping inxi outputs online, I think it's probably time to just force 80 column widths as default and call it a day. You can change these new defaults using configuration options (these are the previous options, though due to a bug, COLS_MAX_CONSOLE was never being used): COLS_MAX_CONSOLE=115 # in display, terminal client max width COLS_MAX_IRC=100 COLS_MAX_NO_DISPLAY=130 # not in display, no X/Wayland running 5b. Changed output wrapped indent to 1 column from 2, and make second and greater rows of a line indent +1 to make it more clear that it is a child row of its parent row. Note that because no arg short form, -S, and -I are special types of rows, this behavior is not used, they just print out as usual. This 1 column indent also applies to -y1, making for a little more data per line but more readable and easy to follow. 6. If > 1 physical cpu detected, no longer uses single/dual/triple/quad core strings, rather uses: 2x 2-core. Also uses lower case -core, not -Core. 7. Only show die counts for CPU (on rare occasions > 1 found) with -xx. Not particularly important bit of data afterall. 8. Make L1, L3 cache data show with -Cx, not -Cxx, now that it's working well. 9. Removed CPU die for -Cxx, that's only going to show with -Ca now. 10. If -Ca, and if certain complexity conditions are met, shows a separate Topology line rather than the Info: 6-core type item. For -b, short, -Cx, -Cxxx shows the Info: topology short form. 11. Bogomips always shows before flags data, whether -f or just -Cx trips flag output. 12. Flags/Features now shows in the same place, under Speeds: always, whether -Cx shortlist, or -Cf full list. Makes more sense that way, and code is much cleaner too. 13. Bogomips, being essentially bogus units of speed for cpu, are moved into Speed: report. -------------------------------------------------------------------------------- DOCUMENTATION: 1. Updated man/help for new CPU extra data options and output changes. 2. Cleaned up and added sample outputs for man CPU items. 3. Now that doas is getting into Linux distros, removed all mentions of doas as a BSD option, and made it a general doas/sudo item. Glad to see doas making it into linux distros, it's a good tool, much easier to configure and use than sudo. Good job OpenBSD guys. Note that inxi already has had full doas support for a while now, but this finalizes it, and makes it fully agnostic. Internally doas is actually preferred over sudo, by the way. 4. Added documention items for INDENT (--indent), INDENT_MIN (--inident-min). 5. Re-ordered help menu and man page, created new Filters and Output Controls sections to make stuff easier to find. In man page, also added on top a list of OPTIONS sections to make finding stuff easier. -------------------------------------------------------------------------------- CODE: 1. Removed legacy /sys cpu functions: cpu_bugs_sys(); get_boost_status(); set_cpu_speeds_sys(). cpu_speeds() is deprecated and now will only be used for legacy Linux and BSDs if they had any per core speeds found; get_caches() was only a placeholder for the full featured cpu_sys data source, and was removed; cpu_speeds() no longer needed, integrated into other logic; cpu_dies_sys() removed, integrated into other logic. This logic is now integrated into cpu_data_sys() data generator. 2. Changed the main CpuItems functions to use array/hash references, not passing full hashes or arrays in most cases now. 3. For machine_data_soc(), switched to CpuItem::cpuinfo_grabber() which then sets the global @cpuinfo and %cpuinfo_machine items, which will be used again in Cpu if cpu data is requested. This gets rid of a full parsing of cpuinfo just to get the machine data section, and also makes it so cpuinfo in cpu does not need to worry about the machine data block, which is not related to the processor blocks anyway, that was always a hack done by the kernel guys to toss that SOC data somewhere as far as I can tell. 4. New tools: * either_or() - takes a list, and returns the first defined element of list. * regex_range() - generate ranges from comma, space, or ranges like 2-29, or any combination of those, like 3,6,12-29 5. Added --force cpuinfo to bypass all /sys based cpu logic, useful for testing to see what would have happened using old logic. 6. Added --dbg switches 39, 40, 41, for the new cpu sys data features, also made more consistent --dbg 8 and --dbg 38 switches. 7. Added sys/cpuinfo pair debugger to support debugging complex sys/cpuinfo issues. 8. Got rid of $b_arm,$b_mips,$b_ppc,$b_sparc, replaced with global %risc, also added $risc{'riscv'} type. this makes general risc type feature testing a lot easier since inxi can either test for %risc defined, or for a specific type of risc cpu. This is much cleaner, and use $risc{'id'} for print purposes, which got rid of a lot of tests. Also made all risc tests consistent, some were ARM only, or arm/mips, but were supposed to be for all risc cpus. 9. Set help menu code to roughly 80 columns width assuming 2 space tab indentation. 10. Changed all xxx_cleaner subs to clean_xxx, all filter subs to filter_xxx, and row_defaults() to message(). 11. Dumped redundant fallback logic in get_kernel_bits, if first getconf method fails, use $sys_bits, and call it good, it was repeating the 32/64 bit tests pointlessly. 12. Cleaned up print_data() to allow for more fine tuned indentation for the new 2 indent levels. 13. Made help menu code more or less wrap to 80 columns, or close. Ongoing to bring to 80 columns where practical, but never at expense of clarity or logic. -------------------------------------------------------------------------------- -- Harald Hope - Tue, 13 Dec 2021 10:25:49 -0800
2021-12-14 18:35:42 +00:00
The nice people at irc.oftc.net channels #linux\-smokers\-club and #smxi, who
all really have to be considered to be co\-developers because of their non\-stop
enthusiasm and willingness to provide real\-time testing and debugging of inxi
development over the years.
LinuxQuestions.org Slackware forum members, for major help with development and
debugging new or refactored features, particularly the redone CPU logic of
2021\-12.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Siduction forum members, who have helped get some features working by providing
a large number of datasets that have revealed possible variations, particularly
for the RAM \fB\-m\fR option.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
AntiX users and admins, who have helped greatly with testing and debugging,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
particularly for the 3.0.0 release.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
ArcherSeven (Max), Brett Bohnenkamper (aka KittyKatt), and Iotaka, who always
manage to find the weirdest or most extreme hardware and setups that help make
inxi much more robust.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
For the vastly underrated skill of output error/glitch catching, Pete Haddow.
His patience and focus in going through inxi repeatedly to find errors and
inconsistencies is much appreciated.
For a huge boost to BSD support, Stan Vandiver, who did a lot of testing
and setup many remote access systems for testing and development.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
All the inxi package maintainers, distro support people, forum moderators,
and in particular, sys admins with their particular issues, which almost always
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
help make inxi better, and any others who contribute ideas, suggestions, and
patches.
decided have skills to edit
2012-09-15 09:18:08 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
Without a wide range of diverse Linux kernel\-based Free Desktop systems to
test on, we could never have gotten inxi to be as reliable and solid as it's
turning out to be.
decided have skills to edit
2012-09-15 09:18:08 +00:00
Enhanced features!! Huge BSD upgrades! Bug Fixes!! Elbrus Fixes!! More bluetooth fixes!! What are you waiting for?!!? A special thanks for significant help, ongoing, leading to a huge boost to BSD support, Stan Vandiver, who did a lot of BSD testing, and setup many remote access systems for testing and development of the latest BSD upgrades. If you're a BSD user, you can thank him for helping to expand BSD support! Take special note of the code folding fixes in Fix 1, those open up possible free software code editors that can be used to work with inxi to more than just Kwrite/Kate, to include scite and geany, nice lightweight code editors. You can't do real work in inxi without code folding, so getting this finally resolved was I think worth it. Also, for the first time ever!! inxi is now using Pledge, well, if OpenBSD::Pledge module is available, which is currently only in OpenBSD, since that's the only system that supports Pledge security, except for Serenity, but inxi doesn't support Serenity. Note that OpenBSD was smart and added OpenBSD::Pledge and OpenBSD::Unveil to Perl Core modules, thus removing any hoop that might stop a Perl program from implementing it. Nice going OpenBSD guys! The addition of OpenBSD softraid support for RAID and CRYPTO types highlights the problem with --raid and --logical, where --raid is really just a subset of Logical volume management. Note that while the hardware RAID feature only lists the actual PCI RAID device, OpenBSD bioctl supports hardware RAID out of the box, something I'd thought of doing in inxi for a few years, but it's too much work, but bioctl has done the work, which is impressive. Can't do much without a lot of debugger data there though, but it's worth being aware of. In this case, since softraid is the primary device, I opted to call Crypto and RAID types all RAID, same as with linear zfs. -------------------------------------------------------------------------------- KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. FreeBSD: USB drivers. I really gave this a try, but could not get any logic to be stable across systems and varying syntaxes used. Will wait for FreeBSD to add drivers to usbconfig -vl. Note that this makes it not possible to correctly match USB networking devices to their respective IF data, so USB networking IF will fall back to the undetected IF-ID, which means it was found but not connected to a specific hardware device. 2. FreeBSD Battery Report: there are non-objective values for Battery state data in sysctl output, as in minutes remaining, which has no meaning, and percent charge (percent of what? original design capacity? current actual capacity?). If data with voltages, design/current capacity in Ah or Wh, is made available, support will be added. Note that there are 3rd party tools that do supply this data in a usable format, but they are not in core so no point. 3. BSDs All: have found no way to get physical CPU counts. this will lead to odd outputs in some cases, like a 2 cpu system reporting itself as a 2x the actual core counts single CPU, but the data just isn't there as far as I know. Dragonfly in some cases appears to have that data. 4. BSDs All: so far no way to get live per core cpu speeds using a file or fast command query. Thought I'd found a way in FreeBSD but that was not the correct clockrate values, or inconsistently right/wrong, so not using it. Also saw the same issue with max/min frequencies in FreeBSD so removed that item, it's better to show nothing than data that is not reliable or actually not even referring to what it seems to be. 5. BSD SOC Support: An issue poster asked why FreeBSD (but really BSD in general) SOC ARM device, like RaPi, support, was so weak in inxi. The reason is simple: to do SOC ARM device data in a meaningful way requires a complete path based data structure, which the BSDs do not appear to have, at least from what I've seen so far. See Linux's /sys data structures for examples of what is required to add or expand inxi SOC device support in inxi. It's hard even with that type of rich path based data, and without it I won't try. The bright side is inxi runs perfectly on such devices, no errors, which was amazing to see, and spoke volumes of the recent work done to extend support for the BSDs. 6. Perl / inxi, when run as root, shows read error when trying to open a 200 / --w------- permission /sys uevent file for reading. The test works as expected as user, but not as root. Perl will try to read it when run as root even though it has no read permissions, only write. This in reality only manifests on very old /sys, from Debian Etch kernel 2.26 days. -------------------------------------------------------------------------------- BUGS: 1. tput + urxvt / FreeBSD: There appears to be a bug in Arch Linux urxvt that leads to failed terminal/console size from tput. Also while trying to resolve this bug, discovered that if you use "tput cols 2>/dev/null" in FreeBSD, for some inexplicable reason tput puts out defaults 80 cols x 24 rows. Why? Who knows. Added in non numeric tests of output to handle errors from tput instead. The bug appears to be what rxvt reports itself as vs what it is actually running as. This issue isn't present in any other distro I tried, but could just be a new bug in urxvt, don't know. 2. Elbrus CPU: Ongoing issue #197 Elbrus poster gave sample of new 2C3 cpuinfo, that exposed some bugs internally in inxi Elbrus handling, I was using integer values instead of hex for model IDs in the Elbrus logic, which would fail after model 9. 3. BSD dmesg.boot: The logic used for dmesg.boot data processing had errors, and had to be fully redone because of the need to detect in a reliable way the current state of USB drives. This logic now is much more robust and reliable, and no longer relies on using 'uniq' values per line, which would fail in all kinds of situations. 4. OpenBSD USB Speeds: bugs fixed for OpenBSD speeds, these were found during the USB data refactor testing process. 5. BSDs: in some cases, wrong memory used values were being generated, this should be largely corrected now. Also pulled the weird NetBSD use of /proc/meminfo which had wrong data in it, and now use vmstat for all BSDs, which after the used bug fixes, is more reliable for BSDs. 6. All systems: CPU stepping would report as N/A if stepping 0, luckily I came across some systems with an actual stepping: 0, which are not common. 7. FreeBSD: dmidecode sourced L2 cache data failed to show correct totals in some cases. Due to no MT detection possible for FreeBSD currently, these totals will still be wrong, but now it says note; check to let users know. 8. dmidecode: some cases were getting the wrong failure error message, this bug became exposed due to OpenBSD locking /dev/mem even to root, which then failed to show the expected message. This was a bug, and is now corrected. 9. FreeBSD: partition swap size didn't show in at least some cases, that's corrected. 10. Linux Partitions: partitions would let doubled swap items through in several cases, and also failed to create in rare cases matches for hidden partition mapped id's. Finally tracked down the actual cause, when moving the partition filters I'd forgotten to add swap into the filter list, oops. But now it will catch duplicates in several different ways, so that's fine. 11. Unmounted: Failed to properly handle detecting RAID components in the case of lvm, mdraid, it was only working for zfs. This was an accident, and should now be corrected. -------------------------------------------------------------------------------- FIXES: 1. Code Folding: Note that this was NOT a bug or failure in inxi, it was a bug in scintilla/scite geany code editors with folding, basically if you commented out logic, without using a space or other marker after the comment #, folding would break in weird ways. Obviously the core scintilla engine should IGNORE the darned # commented out lines, but it doesn't, which is a real bug. But not in inxi. This was however worth working around, because without folding, you can't work on or learn how inxi works, and the only editor I know of in the free software eco-system that can handle folding reasonably accurately was until now Kwrite/Kate code editors, and those have some real, long standing, weaknesses, and bugs around folding that have never been resolved, and yes, did notify them about them, and no, they remain unfixed after years, or they were fixed briefly, then broke again. So it was important to expand the base of possible code editors to more than just the KDE stuff. Fixing this was tedious, but I think worth it. On the bright side, geany/scite folding / unfolding is FAST, and once the code issues that triggered folding failures were resolved, very accurate, much better than Kate's to be honest, though Kate isn't as picky, but Kate's unfold top nodes has been broken more often than it's worked. To avoid this issue, it's also important to configure geany/scite to use a space after the comment when using keyboard shortcuts to comment out lines/blocks. Same goes for Kate/Kwrite, by the way. 2. Battery: Forgot to add battery-force to -v7, which means you would never see the battery line in full output if there was no battery present, this is similar to how raid-forced worked, it was just an oversight which I hadn't noticed until testing the new BSD battery logic. 3. Indentation: small indentation fixes on Sound Server data. Those are visible with -y1, that is. 4. OpenBSD PCI: enabled Device matching to PCI networking device, this required an odd little hack, but seems to be pretty reliable, and allowed me to add driver to PCI device reports as well. Not sure why driver isn't in pcidump -v but it probably will be in the future. Note to self: add in support for that so if they include it in a future release, it will suddenly 'just work', assume they use the same basic syntax as usbdevs -vv output. 5. BSDs: Added in some null data protections for BSDs, which do not always have all the data types found in Linux, those would trigger Perl undefined value errors, which are warnings that inxi failed internally to test for null data in that, but it's hard to know when to do that when the data is basically always there in Linux. 6. Debugger: Added test for required Net::FTP module in debugger, had forgotten to make that test explicit, which led to odd failures. 7. BSDs: nvme detections should be better now. But I have seen no live test system to confirm the fixes work as expected, plus, at least, OpenBSD swaps nvme0 to sd0 internally, so I'm not actually sure how that data will even work, we'll see how that goes. 8. BSDs: oddly, despite using 0x hex numbers almost everywhere, for CPU stepping, the stepping is in decimal, which is even odder because CPU makers list their steppings as hex in many if not most cases. In case this is corrected in the future, if 0x appears before stepping number, will not then try to convert to hex since it already is. 9a. CPU L3: Subtle, probably won't change behaviors, but L3 cache is per physical CPU in every case I've found, so never multiply value by cores for L3. Like everything, this may lead to corner cases being wrong, but that's life, it will also lead to the data being right for most users. 9b. CPU L1: Different L1 syntaxes found so inxi now uses more loose detections, should cover most OpenBSD L1 variants at least. 10. BSDs: inxi was using internal 'sleep' right before reading /proc/cpuinfo, but that was silly for BSDs since cpu speeds there come from sysctl, so the BSD sleeps are now running before sysctl if CPU data feature is required. 11. Too many to remember, but lots of subtle message output changes to make more clear, more accurate, shorter, whatever. 12. USB: a very subtle fix, some devices can be both audio and video, like cameras, but inxi would default to the first detected. Now it checks for both before going to the list of checks, and correctly assigns a type that is both audio and video to the audio and video hashes so both features will show the USB device, not just Audio. 13: BSD: fixes for BSD ifconfig IF status, it was slicing off the full status string, like 'no network' to 'no', which is silly. Now shows full string. 14. OpenBSD: restored USB Hub ports: xx item, I hadn't realized that the data was still there with usbdevs but it required an extra -v, like: usbdevs -vv to trigger, so now the OpenBSD USB ports works fine again. 15. Fedora Xorg: updated --recommends to use the newer split apart xorg utils package names, only xrandr I think needed updating. Thanks Mr. Mazda for keeping up with that stuff! 16. OpenBSD SMART: the actual device being queried turns out to the 'c' partition, the one that represents the entire disk, NOT the main device ID, like sd0, so now inxi tacks on 'c', sd0c, when smartctl runs, and it works fine. So previously SMART report would never have worked in OpenBSD. 17. Partion labels/uuids: in Partitions and Unmounted, does not show label/uuid if fs type is ffs or if fs is a logical type one, like zfs, hammer, and remote fs mounts etc. This cleans up output, since these file system types will never have labels or uuids. 18. Mr Mazda inxi was missing data and showing errors if run in Debian Etch with Perl 5.008, and I realized I'd slipped up and had used the -k option without testing lspci version, but -k was only available in 3.0 in Lenny. But -v turns on -k automatically, so the easy solution was just to remove the -k and leave the -nnv, which is the same thing, but does not cause errors in early lspci. There are also errors with reading as root some /sys uevent files, but upon examination, those had only root write permission, so the perl -r test isn't right. Don't think that can be fixed. See Can't/Won't fix for more. Another issue I noticed was that in some cases Perl seemed to lose track of some hash values in local %trigger in OptionsHandler, and just lose them, thus leading to things like --help --version --recommends not working. Moving %trigger to globals %show and %use fixed that one, but that's weird, no idea what happened, but it works now. Tested in Sarge 3.1, where core modules have to be explicitly installed, they were not included in base Perl install. Kernel 2.4 had some key differences, different lspci syntax, different /proc/partitions, so the block device output and device output is flawed, but otherwise inxi worked fine in Sarge, from 2005! But these issues will not be corrected, kernel 2.24 is just too old, lol. inxi should always run ok in very old systems, like Etch, back to when Perl 5.8 was standard, so bugs like this are always welcome, it's easy to slip up and use something that didn't work in those old systems, then forget to test. 19. Corner case SMART errors, sometimes occur much later in output than inxi expects, this is now corrected and errors should show in smart data no matter where the main error type occured. -------------------------------------------------------------------------------- ENHANCEMENTS: 1. Elbrus: Going along with Bug 2, Updated Elbrus microarch to use family 6, assuming models 10, 11, are the same, which they should be since 12 is the same as in family 4. 2. IPMI Sensors: More sensor syntax detections, sensors will never be stable... 3. OpenBSD: Rolled out live battery state feature, they have very good data, simple, but solid, that allows for a quality battery state report. Handles both Wh/Ah, though I am slightly suspicious of the reality of the arithmetic for Ah > Wh conversion, it seems to be too high. That's Ah * Design Voltage. But Linux battery data has the same issue, though I think in most cases, the data is in Wh, so this issue isn't BSD specific. My suspicion is that the voltages used to determine Ah may actually be slightly lower than the listed design voltage, which inxi calls min: but it's actually the design voltage. Unknown if NetBSD data is the same as OpenBSD for battery, was unable to locate any samples, so can't say, if you have a NetBSD laptop that correctly reports battery state in sysctl -a, please file an issue with some sample battery charge/voltage syntax and values, ideally from > 1 system. If the data is complete, it's easy to add support. 4a. BSD USB rev: inxi now emulates USB rev versions for BSD USB speed/rev version data. Note that this is not guaranteed to be right, because USB devices can be different rev versions than the speed they run at, but as far as I could find, the USB revision data is not available in any practical sense, unless I create a complicated recursive tool to build up a snapshot of the usb system and devices from dmesg data, but I already blew a day on that attempt, so will wait for more complete data in the usb tools in future. The rev version is based on the device/hub speed, using a standard USB rev speed mapping. But a 12 Mbps device can be rev 2, not rev 1.1, for example, that is, it's actually a USB 2.0 device, but a slow speed one. 4b. USB Type: Expanded fallback USB device type tests, these are useful for cases where it's either a vendor defined type, or for Open/NetBSD, which do not yet show USB class/subclass data. But it's a good fallback tool, added Mass Storage, expanded detections. 5. BSD Sensors: Going along with Enhancement 3, rolled out live sensors data. Confirmed working in OpenBSD and FreeBSD, not sure about NetBSD, no data, problem with vm testing is no sensors, but don't have any NetBSD hardware installs to verify. Stan gave it a good try, but could not get NetBSD running so far, maybe later. This basically means the -B and -s features are largely feature complete for the BSDs as far as practical, though due to difficulties in getting the data in a consistent clear way, some more advanced features, like gpu temps, which are now available in Linux kernel values and lm-sensors, do not yet appear to be present in the BSDs, though if this changes, the structures are in place to make updates to these logics very easy to implement now. Note that the --sensors-include and --sensors-exclude items, or config items, work fine with this BSD logic, though you have to figure out what exact syntax to use, but that's the same in Linux. 6. OpenBSD Pledge: Yes, that's right, inxi is now Pledged!!! In OpenBSD, anyway, they did a really good job, and the OpenBSD Perl packager made a very nice Perl modules, OpenBSD::Pledge, which was very easy to implement. Now I know what inxi needs to run its features!! So far OpenBSD only, but Pledge seems like a really good idea, so I figured, let's give it a spin, even if it will only currently work on OpenBSD, but that's fine, inxi is pledged as tightly as I could make it, including unpledging features not required post options processing, once inxi knows what it's actually going to be doing. Note that I'm aware of OpenBSD::Unveil, but that's a lot harder to implement due to never really being sure about what files inxi will need to be looking at until well into the logic. I may look at that in the future. 7. Bluetooth Rfkill: Due to ongoing failures in current inxi to show consistent Bluetooth hci report on Linux, added in one last fallback, rfkill state, which allows inxi to always fallback to at least that basic data. Also added in which tool is providing the report mostly, like: Report: bt-adapter ID: hci0 and so on. Also integrated into -xxx data, or for down state, the full rfkill report, since that can be quite useful. Note that bluetooth is a real pain for users to debug because you can have: * Bluetooth Service: enabled/disabled * Bluetooth Service: started/stopped * bluetoothctl: start/stop * bt-adapter: start/stop * hciconfig: start/stop * rfkill: software: block/unblock; hardware: block/unblock - however, for hardware, that means a physical button has been pressed to disable it, on the laptop that is. To make matters worse, one tool does not always even know when another tool has changed something, for example, if I rfkill blocked hci0, then unblocked it, hciconfig would keep seeing it as down until it was switched to on with hciconfig explicitly. This is I suspect one reason hciconfig is being dropped, it doesn't know how to listen to the newer tools like bluetoothctl, bt-adapter, or rfkill. 8. OpenBSD: Going along with Code Change 1, now has disk serial (doas/root), more consistent physical block size data, more reliable disk data, and for -Dxxx, duid, if available. Also added disk partition table scheme, aka MBR / GPT. Some of these new items may also work with NetBSD. See also Fix 17, SMART fix for OpenBSD. 9. OpenBSD/NetBSD/FreeBSD: the DiskDataBSD refactor now allows Unmounted partitions report. 10. OpenBSD: added in CPU MT detections using siblings data, I think only OpenBSD and Dragonfly support proper MT cpu core counts. Still no way to get physical cpu counts in OpenBSD or FreeBSD or NetBSD that I am aware of. 11. OpenBSD: added in cpu speed min/max data, that was available in most cases, didn't realize that. 12. BSDs: expanded and made more robust cpu L1/L2/L3 cache detections, now for example, OpenBSD will report its L1/L2/L3 cache without root. FreeBSD requires root since that data is coming from dmidecode. This logic update made BSD L-cache data much more reliable and consistent, and, important, easy to work with. This was directly connected to Code Changes 2 and 3, which made dealing with those data sources a lot easier. Note that L1/L2 cache data if not from OpenBSD will show note: check because it's not possible to determine if it's a multithreaded MT cpu or not, and thus if L1/L2 * core count would so often be totally wrong that inxi won't try to guess, it will just list the single value found, and tell the user to check it themselves. 13. OpenBSD: Added rcctl tool to init tools, I hadn't known about that one, that replaces the fallback default used before, /etc/rc.d. 14. RAM Vendor: Issue #245 raised the point that it would be good to try to show RAM vendor data when the manufactorer field is empty, and since that logic is already present in disk_vendor, it was just matter of researching the product IDs to find the matching patterns for the RAM vendors, the initial list is pretty good, but will need updates now and then to correct errors. Also will override only vendor ID 4 character hex value and see if it can find a better value. 15. OpenBSD RAM: data quality is decent (no vendor/product no, unfortunately). The data is often, but sadly not always, available. I'm not clear why sometimes it isn't, but since OpenBSD also defaults to blocking /dev/mem to even root user, which then blocks dmidecode, this is the only practical way to give basic RAM data for OpenBSD, so that's running fine now, when the data is available, with the added bonus of not needing doas/root. Note that due to the way that this data is present, I can have inxi deduce some things like how many arrays there are, and then guess at overall capacity, max stick size, and so on, but all Array-x: values are followed by note: est because they are never based on hard data, just extrapolations. I debated if inxi should even show the guesses, but I think by saying note: est after each Array-x: item, it's pretty clear that it's not hard data, and it does give an idea roughly. I made an initial guess at > 1 ram array but found no data samples to let me see if my guess was right or not, so > 1 array remains roughly theoretical until shown to work or not work empirically. While NetBSD sometimes has the system ram data in a similar way that OpenBSD does in dmesg.boot, it varies too much, and is too inconsistent. There are not enough data samples with good consistent data, and the samples I did see suggested that it would take too much code and convoluted logic to handle the variations, so I'm leaving this one alone. Also, NetBSD probably doesn't block /dev/mem so dmidecode should work fine. 16. Using system clang version info for OpenBSD kernel compiler, the assumption being that a BSD is an OS, so the Clang version it shipped with would be the clang version that compiled the kernel. Please correct if this is wrong. 17. OpenBSD RAID: support added for softraid, including for drive storage totals, unmounted raid component detections. Plugged in pretty smoothly, able to generate a partial report for non root, and shows message if not root. 18. VM detections upgraded, particularly for BSDs, now includes vmm, hvm, hyper-v, kvm. Not all of these would have been detected before. Also cleaned up vm logic, moved all vm detections into $dboot{'machine-vm'}, and only use the first found item. 19. Disk Vendors!!: Yes, last, but not least!! More disk vendors, vendor ID matches!! Yep. What else can I say? Eternity? Man's quest for something that cannot be found, yet these strivings never cease, here manifested by always new vendors and ID matches! -------------------------------------------------------------------------------- DOCUMENTATION: 1. Very significant ongoing upgrades to the docs in inxi-perl/docs/, particularly in inxi-values.txt, inxi-resources.txt, and inxi-data.txt. These are now increasingly useful, and I am trying to keep in particular inxi-values.txt up to date as a primary reference for various features, though it will always lag, because that's how it is, lol. 2. Cleaned up changelog, made 80 cols wide for text, bars, etc, made numbered lists and headers consistent, but otherwise did not change any of the actual content. -------------------------------------------------------------------------------- CODE CHANGES: 1. Complete rewrite of BSD disk/partition data tools, now there is one core tool that generates a mega-disk/partition hash, which is then used for all features that need partition/disk data. This worked out super well, and allowed new features like BSD Unmounted disk data to be generated for the first time ever, along with filling in various block device fields that were missing before. 2. Change 1 also went along with a refactor of dmesg data tool for BSDs, which allowed for much more granular data generation, along with a complex %dboot hash which stores all sub types as well as the main full dataset. This allowed inxi to stop looping through all of dmesg data each time a feature needed it. Now all the data types are assigned if required by a feature, and only then. This, along with change 1, worked really well. See also Bug 3, which mandated completely changing how dmesg.boot and dmesg live data were / are merged, the result is far more robust now, and far less prone to error. 3. Similar to dmesg changes, used same methods for sysctl data, now all the data is assigned to %sysctl data structure based on if needed or not, so it only does the assignments one time, in one location. Much cleaner code this way, and allows for testing set/unset substructures, like $sysctl{'cpu'}. 4. The %dboot and %sysctl refactors went so well that I switched the core USB and Devices to also use %usb and %devices structures. These updates let me dump a lot of global hashes and arrays, and leaned everything down a lot, and also removed basically all the testing loops for these data types, now the Item features just test to see if a reference to the specific type exists, if it does, it has data, if not, it doesn't, this is a lot easier to manage. 5. Ongoing: moving related subroutines to Packages, the goal is to have pretty much all related subroutines (functions) contained in parent classes/packages, makes it easier to maintain. 6. Ongoing: making all internal package tools have similar sub names, getting rid of the specific names for output and data generator functions. This makes each Item Generator increasingly like all the others, as much as practical. 7. A big one, renamed all the feature generators to be XxxxxItem, instead of XxxxData, which was colliding as a package name with actual data generator tools, now all the Feature generators are [Feature]Item, and all the Data generators have Data type names where relevant. This avoided in particular the silly case where I was relying on case to differentiate UsbData and USBData, feature vs data generator. 8. As part of the move to data hash global structures, also moved as many of the top global scalars and hashes and arrays to these now much more heavily utilized global hashes, like %alerts, %use, %fake, %force, and so on. There are now far fewer globals running than before, and where it makes sense, I keep moving them into global hashes, and giving the global hashes more work to do. 9. Significantly expanded list of debuggers for specific data types always available, see docs/inxi-values.txt for list of options there. Decided for rapid development, it was too much of a pain to always be uncommenting the debuggers, so now am uncommenting, adding to @dbg supported items, then documenting. I guess this means the @dbg items are more or less stable and consistent now, give or take. 10. Refactored UsbData and DeviceData, for in particular the BSDs, to be much more robust and to rely less on very fragile regex parsing patterns, takes more lines of code, but better than having the detections break every other BSD release. This was part of the %device and %usb refactors as well. 11. Fixed system_files() too, which was really silly logic, it used a global packed hash of system files, then would do a function call for the paths when required, which was redundant since the values were already in a hash which could be used directly. This was a throwback to inxi gawk/bash, where hashes were not really used in this way, and the logic had been translated to Perl without thinking about it, but once I thought about it, I realized how silly that was. This must have knocked off a good 50 or more unnecessary, and always expensive, function calls.
2021-04-17 03:41:58 +00:00
And of course, a big thanks to locsmif, who figured out a lot of the core
ideas, logic, and tricks originally used in inxi Gawk/Bash.
Huge upgrade!! Bug Fixes!! Refactors!!! BSDs!!! More BSDs!!! raspberry pi!! New Features!!! Enhanced old features!!! Did I mention bluetooth?! USB? Audio? No? well, all hugely upgraded! ------------------------------------------------------------------------ BUGS: 1. Sadly, 3.3.01 went out with a bug, forgot to remove a debugger, resulted in hardcoded kernel compiler version always showing. Note that there is a new inxi-perl/docs/inxi-bugs.txt file to track such bugs, and matched to specific tagged releases so you know the line number and items to update to fix it. 2. Typo in manjaro system base match resulted in failing to report system base as expected. ------------------------------------------------------------------------ KNOWN ISSUES BUT CAN'T OR WON'T BE FIXED: 1. OpenBSD made fvwm -version output an error along with the version, and not in the normal format for standard fvwm, this is just too complicated to work around for now, though it could be in theory by creating a dedicated fvwm-oBSD item in program_values. But that kind of granularity gets too hard to track, and they are likely to change or fix this in the future anyway. Best is they just restore default -version output to what it is elsewhere, not nested in error outputs. 2. Discovered an oddity, don't know how widespread this is, but Intel SSDs take about 200 milliseconds to get the sys hwmon based drive temps, when it should take under a millisecond, this may be a similar cause as those drives having a noticeable SMART report delay, not sure. This is quite noticeable since 200 ms is about 15% of the total execution time on my test system. ------------------------------------------------------------------------ FIXES: 1. For --recommends, added different rpm SUSE xdpyinfo package name. 2. Distro Data: added double term filter for lsb-release due to sometimes generating repeated names in distro. 3. Packages: fix for appimage package counts. 4. Desktop: fixed ID for some wm when no xprop installed, fallback to using @ps_cmd detections, which usually work fine. 5a. When swap used was 0, showed N/A, fixed to correctly show 0 KiB. 5b. If no swap devices found, BSDs were not correctly showing no swap data found message. Corrected. 6a. Bluetooth: Removed hcidump from debugger, in some cases, that will just hang endlessly. Also wrapped bluetoothctl and bt-adapter debugger data collection with @ps_cmd bluetooth running test. Only run if bluetooth service is running. 6b. Bluetooth: running detections have to be very strict, only bluetoothd, not bluetooth, the latter can show true when bluetoothd is not running, and did in my tests. 7. USB: with Code Change 1, found a few places where fallback usb type detections were creating false matches, which resulted in say, bluetooth devices showing up as network devices due to the presence of the word 'wireless' in the device description. These matches are all updated and revised to be more accurate and less error prone. 8. Battery: an oversight, had forgotten to have percent used of available capacity, which made Battery data hard to decipher, now it shows the percent of available total, as well as the condition percent, so it's easier to understand the data now, and hopefully more clear. 9a. OpenBSD changed usbdevs output format sometime in the latest releases, which made the delicate matching patterns fail. Updated to handle both variants. They also changed pcidump -v formatting at some point, now inxi will try to handle either. Note that usbdevs updates also work fine on NetBSD. 9b. FreeBSD also changed their pciconf output in beta 13.0, which also broke the detections completely, now checks for old and new formats. Sigh. It should not take this much work to parse tools whose output should be consistent and reliable. Luckily I ran the beta prior to this release, or all pci device detections would simply have failed, without fallback. 9c. Dragonfly BSD also changed an output format, in vmstat, that made the RAM used report fail. Since it's clearly not predictable which BSD will change support for which vmstat options, now just running vmstat without options, and then using processing logic to determine what to do with the results. 10. It turns out NetBSD is using /proc/meminfo, who would have thought? for memory data, but they use it in a weird way that could result in either negative or near 0 ram used. Added in some filters to not allow such values to print, now it tries to make an educated guess about how much ram the system is really using based on some tests. 11. Something you'd only notice if testing a lot, uptime failed when the uptime was < 1 minute, it had failed to handle the seconds only option, now it does, seconds, minutes, hours:minutes, days hours:minutes, all work. 12. Missed linsysfs type to exclude in partitons, that was a partner to linprocfs type, both are BSD types. 13. Added -ww to ps arguments, that stops the cutting width to terminal size default behavior in BSDs, an easy fix, wish I'd known about that a long time ago. 15. gpart seems to show sizes in bytes, not the expected KiB, so that's now handled internally. Hopefully that odd behavior won't randomly change in the future, sigh. 16. Fixed slim dm detection, saw instance where it's got slim.pid like normal dms, not the slim.lock which inxi was looking for, so now inxi looks for both, and we're all happy! ------------------------------------------------------------------------ ENHANCEMENTS: 1. Added in something that should have been there all along, now inxi validates the man page download as well as the self, this avoids corrupted downloads breaking the man. 2. Init: added support for shepherd init system. 3. Distro Data: added support for guix distro ID; added support for NomadBSD, GhostBSD, HardenedBSD system base. GhostBSD also shows the main package version for the distro version ID, which isn't quite the same as the version you download, but it's close. Also added os-release support for BSDs, using similar tests as for linux distros, that results in nicer outputs for example for Dragonfly BSD. 4. Package Data: added guix/scratch [venom]/kiss/nix package managers. Update for slackware 15 package manager data directory relocation, now handles either legacy current or future one. 5. Repos: added scratch/kiss/nix-channels; Added GhostBSD, HardenedBSD pkg repos. 6. USB Data: added usbconfig. That's FreeBSD's, and related systems. 7. Device Data: Added pcictl support, that's NetBSD's, I thought inxi had supported that, but then I remembered last time I tried to run netBSD in a vm, I couldn't get it figured out. Now debugged and working reasonably well. 8. Raspberry Pi 3, 4: ethernet nic now detected; wifi device, which is on a special mmcnr type, now works, that stopped working in pi 3, due to the change, now it's handled cleanly. Also added support for pi bluetooth, which lives on a special serial bus, not usb. For Raspberry Pi OS, added system base detections, which are tricky. Also matched mmcnr devices to IF data, which was trickyy as well. Note that as far as I could discover, only pi puts wifi on mmcnr. 9. Bluetooth: due to deprecated nature of the fine hciconfig utility, added in support for bt-adapter, which also allows matching of bluetooth data to device data, but is very sparse in info supplied compared to hciconfig. bluetoothctl does not have enough data to show the hci device, so it's not used, since inxi can't match the bluetooth data to the device (no hci[x]). This should help the distros that are moving away from hciconfig, in particular, AUR is only way arch users can get hciconfig, which isn't ideal. 10. New tool and feature, ServiceData, this does two things, as cross platform as practical, show status of bluetooth service, this should help a lot in support people debugging bluetooth problems, since you have bluetooth enabled but down, or up, disabled, and you can also have the device itself down or up, so now it shows all that data together for when it's down, but when the device is up, it just shows the device status since the other stuff is redundant then. In -Sa, it now shows the OS service manager that inxi detected using a bunch of fallback tests, that's useful to admins who are on a machine they don't know, then you can see the service manager to use, like rc-service, systemctl, service, sv, etc. 11. Big update for -A: Sound Servers: had always been really just only ALSA, now it shows all detected sound servers, and whether they are running or not. Includes: ALSA, OSS, PipeWire, PulseAudio, sndio, JACK. Note that OSS version is a guess, might be wrong source for the version info. 12. Added USB device 'power:' item, that's in mA, not a terrible thing to have listed, -xxx. This new feature was launched cross platform, which is nice. Whether the BSD detections will break in the future of course depends on whether they change the output formats again or not. Also added in USB more chip IDs, which can be useful. For BSDs, also added in a synthetic USB rev, taken from the device/hub speeds. Yes, I know, USB 2 can have low speed, full speed, or high speed, and 1.1 can have low and full speeds, so you actually can't tell the USB revision version from the speeds, but it's close enough. 13. Made all USB/Device data the same syntax and order, more predictable, bus, chip, class IDs all the same now. 14. Added in support for hammer and null/nullfs file system types, which trigger 'logical:' type device in partitions, that's also more correct than the source: Err-102 that used to show, which was really just a flag to alert me visibly that the partition type detection had simply failed internally. Now for detected types, like zfs tank/name or null/nullfs, it knows they are logical structures. 15. Expanded BSD CPU data, where available, now can show L1/L2/ L3 cache, cpu arch, stepping, family/model ids, etc, which is kind of nifty, although, again, delicate fragile rules that will probably break in the future, but easier to fix now. 16. By an old request, added full native BSD doas support. That's a nice little tool, and it plugged in fairly seamlessly to existing sudo support. Both the internal doas/sudo stuff should work the same, and the detection of sudo/doas start should work the same too. 17a. Shell/Parent Data: Big refactor of the shell start/parent logic, into ShellData which helped resolve some issues with running-in showing shell name, not vt terminal or program name. Cause of that is lots of levels of parents before inxi could reach the actual program that was running inxi. Solution was to change to a longer loop, and let it iterate 8 times, until it finds something that is not a shell or sudo/doas/su type parent, this seems to work quite well, you can only make it fail now if you actually try to do it on purpose, which is fine. This was very old logic, and carried some mistakes and redundancies that made it very hard to understand, that's cleaned up now. Also restored the old (login) value, which shows when you use your normal login account on console, some system will also now show (sudo,login) if the login user sudos inxi, but that varies system to system. 17b. BSD running-in: Some of the BSDs now support the -f flag for ps, which made the parent logic for running-in possible for BSDs, which was nice. Some still don't support it, like OpenBSD and NetBSD, but that's fine, inxi tests, and if no support detected, just shows tty number. Adding in more robust support here cleaned up some redundant logic internally as well. 17c. Updated terminal and shell ID detections, there's quite a few new terminals this year, and a new shell or two. Those are needed for more reliable detections of when the parent is NOT a shell, which is how we find what it is. 18. Added ctwm wm support, that's the new default for NetBSD, based on twm, has version numbers. 19. Upgraded BSD support for gpart and glabel data, now should catch more more often. 20. For things like zfs raid, added component size, that doesn't always work due to how zfs refers to its components, but it often does, which is better than never before. 21. To make BSD support smoother, got rid of some OpenBSD only rules, which in fact often apply to NetBSD as well. That may lead to some glitches, but overall it's better to totally stay away from OpenBSD only tests, and all BSD variant tests, and just do dynamic testing that will work when it applies, and not when it doesn't. In this case, added ftp downloader support for netBSD by removing the openBSD only flag for that item. There's a bit of a risk there in a sense since if different ftp programs with different options were to be the fallback for something else, it might get used, but that's fine, it's a corner case, better to have them all work now than to worry about weird future things. But limiting it to only BSDs should get rid of most of the problem. vmstat and optical drive still use net/openbsd specifics because it is too tricky to figure out it out in any more dynamic way. 22. For -Sxxx, added if systemd, display, virtual terminal number. Could be useful to debug subtle issues, if the user is for example not running their desktop in vt 7, the default for most systems. ------------------------------------------------------------------------ CHANGES: 1. Moved battery voltage to -Bx output, the voltage is quite important to know since that is the key indicator of battery state. If voltage is within .5 volts of specified minimum, shows voltage for -B since that's a prefail condition, it's getting close to death. 2. In partitions and raid, when the device was linear raid logical type layout, it said, no-raid, when it should be 'linear', that's now cleaner and more correct. 3. When running-in is a tty value, it will now show the entire tty ID, minus the '/dev/tty', this will be more precise, and also may resolve cases where tty was fully alpha, no numbers, previously inxi filtered out everything that was not a number, but that can in some tty types remove critical tty data, so now it will show: running-in: tty 2 [not changed]; tty pts/2 [adds pts/]; tty E2 [adds the E]; tty rx [would have not shown at ll before] ------------------------------------------------------------------------ CODE CHANGES: NOTE: unlike the previous refactors, a lot of these changes were done to make inxi more maintainable, which means, slightly less optimized, which has been my preference in the past, but if the stuff can't be maintained, it doesn't matter how fast it runs! These changes have really enhanced the quality of the code and made it a lot easier to work with. It's also now a lot easier to add debuggers, force/fake data switches, etc, so it gets done, unlike before, when it was a pain, so it got skipped, and then caused bugs because of stray debuggers left in place, and so on. The bright side is while reading up on this, I learned that using very large subs is much more efficient than many small ones, which I've always felt was the case, and it is, so the style used internally in inxi proves to be the best one for optimizations. These refactors, ongoing, have now touched at least 1/3, almost 1/2, of the entire inxi codebase, so the stuff is getting more and more consistent and up to date, but given how old the logic is in places, there will be more refactors in the future, and maybe once the code is easier to maintain, some renewed optimizations!, if we can find anything that makes sense, like passing array/hash references back to the caller, already the first half is done, passing references to the sub/method always. The second part is started, using the Benchmark Perl module, which really speeds up testing and helps avoid pointless tweaks that do little re speed improvements. I could see with some care some areas where working on data directly via references could really speed things up, but it's hard to write and read that type of code, but it's already being done in the recursive data and output logics, and a few other places. 1. Large refactor of USBData, that was done in part to help make it work for BSDs better, but also to get it better organized. This refactor also made all the device items, like -A,-G,-N,-E use the same methods for creating USB output, previously they had used a hodgepodge of methods, some super old, it was not possible to add USB support more extensively for BSDs without this change. Also added in some fallback usb type detection tools using several large online collections of that info to see what possible matching patterns could catch more devices and correctly match them to their type, which is the primary way now that usb output per type is created. This really helps with BSDs, though BSD usb utilities suffer from less data than lsusb so they don't always get device name strings in a form where they can be readily ID'ed, but it's way better than it was before, so that's fine! Moved all previous methods of detecting if a card/device was USB into USBData itself so it would all be in one place, and easier to maintain. All USB tools now use bus_id_alpha for sorting, and all now sort as well, that was an oversight, previously the BSD usb tools were not sorted, but those have been enhanced a lot, so sorting on alpha synthetic bus ids became possible. Removed lsusb as a BSD option, it's really unreliable, and the data is different, and also varies a lot, it didn't really work at all in Dragonfly, or had strange output, so lsusb is now a linux only item. 2. Moved various booleans that were global to %force, %loaded, and some to the already present, but lightly used, %use hashes. It was getting too hard to add tests etc, which was causing bugs to happen. Yes, using hashes is slower than hardcoding in the boolean scalars, but this change was done to improve maintainability, which is starting to matter more. 3. Moved several sets of subs to new packages, again, to help with debugging and maintainability. MemoryData, redone in part to handle the oddities with NetBSD reporting of free, cached, and buffers, but really just to make it easier to work with overall. Also moved kernel parameter logic to KernelParameters, gpart logic to GpartData, glabel logic to GlabelData, ip data IpData, check_tools to CheckTools, which was also enhanced largely, and simplified, making it much easier to work with. 4. Wrapped more debugger logic in $fake{data} logic, that makes it harder to leave a debugger uncommented, now to run it, you have to trigger it with $fake{item} so the test runs, that way even if I forget to comment it out, it won't run for regular user. 5. Big update to docs in branch inxi-perl/docs, those are now much more usable for development. Updated in particular inxi-values.txt to be primary reference doc for $fake, $dbg, %force, %use, etc types and values. Also updated inxi-optimization.txt and inxi-resources.txt to bring them closer to the present. Created inxi-bugs.txt as well, which will help to know which known bugs belonged to which frozen pools. These bugs will only refer to bugs known to exist in tagged releases in frozen pool distros. 6. For sizes, moved most of the sizing to use main::translate_size, this is more predictable, though as noted, these types of changes make inxi a bit slower since it moved stuff out of inline to using quick expensive sub calls, but it's a lot easier to maintain, and that's getting to be more important to me now. 7. In order to catch live events, added in dmesg to dmesg.boot data in BSDs, that's the only way I could find to readily detect usb flash drives that were plugged in after boot. Another hack, these will all come back to bite me, but that's fine, the base is easier to work on and debug now, so if I want to spend time revisiting the next major version BSD releases, it will be easier to resolve the next sets of failures. 8. A big change, I learned about the non greedy operator for regex patterns, ?, as in, .*?(next match rule), it will now go up only to the next match rule. Not knowing this simple little thing made inxi use some really convoluted regex to avoid such greedy patterns. Still some gotchas with ?, like it ignores following rules that are zero or 1, ? type, and just treats it as zero instances. But that's easy to work with. 9. Not totally done, but now moved more to having set data tools set their $loaded{item} value in get data, not externally, that makes it easier to track the stuff. Only where it makes sense, but there's a lot of those set/get items, they should probably all become package/classes, with set/get I think. 10. Optimized reader() and grabber() and set_ps_aux_data(), all switched from using grep/map to using for loops, that means inxi doesn't have to go through each array 2x anymore, actually 4x in the case of set_ps_aux_data(). This saved a visible amount of execution time, I noticed this lag when running pinxi through NYTProf optimizer, there was a quite visible time difference between grabber/reader and the subshell time, these optimizations almost removed that difference, meaning only the subshell now really takes any time to run. Optimized url_cleaner and data_cleaner in RepoData, those now just work directy on the array references, no returns. Ran some more optimization tests, but will probably hold off on some of them, for example, using cleaner() by reference is about 50% faster than by copy, but redoing that requires adding in many copies from read only things like $1, so the change would lead to slightly less clean code, but may revisit this in the future, we'll see. But in theory, basically all the core internal tools that take a value and modify it should do that by reference purely since it's way faster, up to 10x.
2021-03-16 01:44:00 +00:00
.\" EOF
Reference in a new issue Copy permalink